Publications

Find		by
in
in

2027 publications found.

tbc

CARD, A.J. (tbc) 'Sustainability of public health programs: Position on the heirarchy of risk controls as an important characteristic of the intervention' in American Journal of Public Health, (In press)

2013

BRADLEY, M.D., WALLER, S.D., GOODMAN-DEANE, J., HOSKING, I., TENNETI, R., LANGDON, P.M. and CLARKSON, P.J. (2013) 'Age, technology prior experience and ease of use: Who's doing what?' in International Conference on Ergonomics & Human Factors 2013, Liverpool, UK,
CLARKSON, P.J. and COLEMAN, R. (2013) 'History of inclusive design in the UK' in Applied Ergonomics, (In Press)
CRILLY, N. (2013) 'Function propagation through nested systems' in Design Studies, 34 (2), 216-242
EASTWOOD, J.P., GHISU, T. and JARRETT, J.P. (2013) 'Tailored seeding geometries for the multi-fidelity design of compression systems' in 9th AIAA MDO Specialists Conference, Boston, MA, USA,
GOODMAN-DEANE, J., WALLER, S.D., COLLINS, A-C. and CLARKSON, P.J. (2013) 'Simulating vision loss: What levels of impairment are actually represented?' in International Conference on Ergonomics & Human Factors 2013, Liverpool, UK,
HORBERRY, T., REGAN, M.A. and EDQUIST, J. (2013) 'Using road safety evidence and "safety in design" approaches' in Driver distraction and inattention - advances in research and countermeasures, volume 1
HURTIENNE, J., HORN, A-M., LANGDON, P.M. and CLARKSON, P.J. (2013) 'Facets of prior experience and the effectiveness of inclusive design' in Universal Access in the Information Society,
KERLEY, W.P. and CLARKSON, P.J. (2013) 'Development of the older people's primary care mental health service (OPPCMHS)', National Institute for Health Research - Collaborations for Leadership in Applied Health and Care (CLAHRC), Technical Report
KIRNER, K., SIYAM, G.I., WYNN, D.C., LINDEMANN, U. and CLARKSON, P.J. (2013) 'Information in lean product development: Assessment of Value and Waste' in ICoRD '13, 809-819
KIRNER, K., SIYAM, G.I., WYNN, D.C., LINDEMANN, U. and CLARKSON, P.J. (2013) 'Understanding, managing, and assessing value and waste of information in Lean product development' in 4th International Conference on Research into Design (ICoRD '13), Indian Institute of Technology Madras, Chennai, India,
LANGDON, PM., JOHNSON, D., HUPPERT, F. and CLARKSON, P.J. (2013) 'A framework for collecting inclusive design data for the UK population' in Applied Ergonomics,
MIECZAKOWSKI, A., HESSEY, S. and CLARKSON, P.J. (2013) 'Inclusive design and the bottom line: How can its value be proven to decision makers?' in HCI 2013, Las Vegas, NV, USA,
MIECZAKOWSKI, A., HESSEY, S. and CLARKSON, P.J. (2013) 'Inclusive design within a large organisation' in Ergonomics and Human Factors 2013, Cambridge, UK,
MIECZAKOWSKI, A.K. and CLARKSON, P.J. (2013) 'Ageing, adaption and accessibility: Time for the inclusive revolution!', , ISBN-13: 9780954524388
NICHOLL, B., FLUTTER, J.A.E., HOSKING, I.M. and CLARKSON, P.J. (2013) 'Transforming practice in design and technology: Evidence from a classroom-based research study of students' responses to an intervention on inclusive design' in The Curriculum Journal, , 1-17
WALLER, S.D., BRADLEY, M.D., HOSKING, I.M. and CLARKSON, P.J. (2013) 'Making the case for inclusive design' in Applied Ergonomics,
WALLER, S.D., BRADLEY, M.D., LANGDON, P.M. and CLARKSON, P.J. (2013) 'Visualising the number of people who cannot perform tasks related to product interactions' in Universal Access in the Information Society,
WARD, J.R., TENG, Y-C., HORBERRY, T. and CLARKSON, P.J. (2013) 'Healthcare human reliability analysis - by heart' in International Conference on Ergonomics & Human Factors 2013, Liverpool, UK,
WEBSTER, W.D. (2013) 'Assessment and development of the modelling capabilities of the Geant4 toolkit for designing low-energy radioisotope production facilities', Cambridge University Engineering Department, First Year Report

2012

AHMAD, A. (2012) 'Accelerator-induced transients in accelerator-driven subcritical reactors', Thesis-PhD, University of Cambridge
AHMAD, N WYNN, D.C. and CLARKSON, P.J. (2012) 'Change impact on a product and its redesign process: A tool for knowledge capture and reuse' in Research in Engineering Design,
BAKKER, C. (2012) 'Differential geometry as a paradigm for multidisciplinary design optimization', Cambridge University Engineering Department, First Year Report
BENIUK, C., WARD, J.R. and CLARKSON, P.J. (2012) 'Applying inclusive design principles in the assessment of healthcare services' in Proceedings of the 1st European Conference on Design 4 Health 2011
BENIUK, K. (2012) 'Integrating evidence-based medicine and service design: A study of emergency department crowding', PhD-thesis, Cambridge University Engineering Department
BISWAS, P. (2012) 'An inclusive approach to develop web TV applications' in Journal of Assistive Technologies, 6 (3)
BISWAS, P. and LANGDON, P.M. (2012) 'Inclusive user modelling and simulation' in Advances in therapeutic engineering, (In press)
BISWAS, P. and LANGDON, P.M. (2012) 'Developing multimodal adaptation algorithm for mobility impaired users by evaluating their hand strength' in International Journal of Human-Computer Interaction, 1044-7318
BISWAS, P. and LANGDON, P.M. (2012) 'A demonstration of the Cambridge user model' in 6th Cambridge Workshop on Universal Access and Assistive Technology (CWUAAT 2012), Fitzwilliam College, Cambridge, UK, (Inclusive Design)
BISWAS, P., LANGDON, P.M., DUARTE, C., JUNG, C., HAMISU, P. and ALMEIDA, L. (2012) 'Developing intelligent user interfaces for e-accessibility and e-inclusion' in International Conference on Intelligent User Interfaces (IUI) 2012, Lisbon, Portugal,
BISWAS, P ROBINSON, P. (2012) 'The cluster scanning system' in Universal Access in the Information Society, 12 (3)
BOYLE, A., BENIUK, K., HIGGINSON, I. and ATKINSON, P. (2012) 'Emergency department crowding, time for interventions and policy evaluations' in Emergency Medicine International, (In press)
BRADLEY, M.D., WALLER, S.D., GOODMAN-DEANE, J., HOSKING, I., TENNETI, R., LANGDON, P.M. and CLARKSON, P.J. (2012) 'A population perspective on mobile phone related tasks' in Designing inclusive systems
BRADLEY, M.D., ZITKUS, E., KODAGODA, N., MURAD, S., WESTAWAY, C., GAGGARO, C., FITZSIMONS, D., BARNARD, Y.F. and LLOYD, A.D. (2012) 'What happens when ergonomists try to design a first prototype touchscreen interface for older novices using guidelines and research data?' in Ergonomics and Human Factors 2012, Blackpool, UK, (In press)
CARD, A.J., HARRISON, H., WARD, J.R. and CLARKSON, P.J. (2012) 'Using prospective hazard analysis to assess an active shooter emergency operations plan' in Journal of Healthcare Risk Management, 31 (3), 34-40 (In press)
CARD, A.J., WARD, J.R. and CLARKSON, P.J. (2012) 'Getting to zero: Evidence-based healthcare risk management is key' in Journal of Healthcare Risk Management, 32 (2), 20-27
CARD, A.J., WARD, J.R. and CLARKSON, P.J. (2012) 'Risk management policies and procedures in the NHS: An assessment of risk evaluation guidance in the East of England primary care and mental health sectors' in AcademyHealth Annual Research Meeting, Orlando, FL, USA,
CARD, A.J., WARD, J.R. and CLARKSON, P.J. (2012) 'Successful risk assessment may not always lead to successful risk control: A systematic literature review of risk control after root cause analysis' in Journal of Healthcare Risk Management, 31 (3), 6-12
CARD, A.J., WARD, J.R. and CLARKSON, P.J. (2012) 'Beyond FMEA: The structured what-if technique (SWIFT)' in Journal of Healthcare Risk Management, 31 (4), 23-29
CARDOSO, C. and CLARKSON, P.J. (2012) 'Simulation in user-centred design: Helping designers to empathise with atypical users' in Journal of Engineering Design, 23 (1), 1-22
CLARKSON, P.J., LANGDON, P.M., ROBINSON, P., LAZAR, J. and HEYLIGHEN, A. (2012) 'Proceedings, 6th Cambridge Workshop on Universal Access and Assistive Technology', Cambridge University Engineering Department CUED/C-EDC/TR158
CRILLY, N., BLACKWELL, A.F. and CLARKSON, P.J. (2012) 'Graphic elicitation: Using research diagrams as interview stimuli' in SAGE visual methods, 4, 283-307
EASTWOOD, J.P. (2012) '3D bumps: Bridging the gap between lift/drag improvement and buffet alleviation?', Thesis-PhD, University of Cambridge
EASTWOOD, J.P. and JARRETT, J.P. (2012) 'Towards designing with 3D bumps for lift/drag improvement and buffet alleviation' in AIAA Journal, 50 (12), 2882-2898
GOLDHABER, T.S., LANGDON, P.M. and CLARKSON, P.J. (2012) 'Intrinsic motivation and design of ICT for the ageing population' in Designing Inclusive Systems
GRACEY, F., KOMASHIE, A. and MALLEY, D. (2012) 'Models, simulations and metacognition: Reflections on interactions between systems engineering and neuropsychology in brain injury rehabilitation' in 9th World Congress on Brain Injury, Edinburgh, UK,
HAJNASSIRI, S. (2012) 'The management of product development processes', Cambridge University Engineering Department, First Year Report
HAMRAZ, B., CALDWELL, N.H.M. and CLARKSON, P.J. (2012) 'A multidomain engineering change propagation model to support uncertainty reduction and risk management in design' in Journal of Mechanical Design, 134 (10)
HAMRAZ, B., CALDWELL, N.H.M. and CLARKSON, P.J. (2012) 'A matrix-calculation-based algorithm for numerical change propagation analysis' in IEEE Transactions on Engineering Management, PP (99), 1-13
HAMRAZ, B., CALDWELL, NHM. and CLARKSON, P.J. (2012) 'FBS linkage model - towards an integrated engineering change prediction and analysis method' in 12th International Design Conference (DESIGN 2012), Dubrovnik, Croatia, 901-910
HE, C. (2012) 'Managing and improving iteration in product development process: Identifying alternative feedback routes for tasks in failure mode', Cambridge University Engineering Department, First Year Report
HINRICHS, S., OWENS, M., DUNN, V. and GOODYER, I. (2012) 'General practitioner experience and perception of Child and Adolescent Mental Health Services (CAMHS) care pathways: A multimethod research study' in BMJ Open 2012, 2 (6), 17
HORBERRY, T. (2012) 'Better integration of human factors considerations within safety in design' in Theoretical Issues in Ergonomics Science,
HORBERRY, T., BURGESS-LIMERICK, R. and FULLER, R. (2012) 'The contributions of human factors and ergonomics to a sustainable minerals industry' in Ergonomics,
HUCKVALE, K., CAR, M., MORRISON, C. and CAR, J. (2012) 'Apps for asthma self-management: A systematic assessment of content and tools' in BMC Medicine, 10 (1), 144
JARRETT, J.P. and GHISU, T. (2012) 'On the application of differential geometry to MDO' in 14th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Indianapolis, IN, USA,
JARRETT, J.P. and GHISU, T. (2012) 'Geometric perspectives on MDO and MDO architectures' in 14th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Indianapolis, IN, USA,
JARRETT, J.P. and GHISU, T. (2012) 'An approach to multi-fidelity optimization of aeroengine compression systems' in 14th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Indianapolis, IN, USA,
JOKISUU, E., LANGDON, P.M. and CLARKSON, P.J. (2012) 'A framework for studying cognitive impairment to inform inclusive design' in Designing Inclusive Systems
JUNG, C., HAMISU, P., DUARTE, C BISWAS, P. and ALMEIDA, L. (2012) 'GUIDE: Personalisable multi-modal user modal user interfaces for web applications on TV interfaces' in NEM Summit 2012, Istanbul, Turkey, (Inclusive Design)
JUN, G.T., MORRISON, C., O'LOUGHLIN, C. and CLARKSON, P.J. (2012) 'Which diagrams and when? Health workers' choice and usage of different diagram types for service improvement' in Lecture Notes in Computer Science, 7352, 340-342
KAKLANIS, N MOHAMAD, Y., PEISSNER, M., BISWAS, P., LANGDON, PM. and TZOVARAS, D. (2012) 'An interoperable and inclusive user modelling concept for simulation and adaptation' in The 20th Conference on User Modeling, Adaptation, and Personalization , Montreal, Canada, (Inclusive Design)
KOH, E.C.Y., CALDWELL, N.H.M. and CLARKSON, P.J. (2012) 'A method to assess the effects of engineering change propagation' in Journal of Engineering Design, , 1-23
LANGDON, P.M. and BISWAS, P. (2012) 'Clustering user data for user modelling in the GUIDE multi-modal' in Designing inclusive systems
LANGDON, P.M., CLARKSON, P.J., ROBINSON, P., LAZAR, J. and HEYLIGHEN, A. (2012) 'Designing inclusive systems', Springer Verlag
LE, H.N. (2012) 'A transformation-based model integration framework to support iteration management in engineering design', Thesis-PhD, University of Cambridge
LE, H.N., WYNN, D.C. and CLARKSON, P.J. (2012) 'Impacts of concurrency, iteration, design review, and problem complexity on design project lead time and error generation' in Concurrent Engineering Research and Applications, 20 (1), 55-67
LINDLEY, B. (2012) 'Actinide management and high conversion ratios in thorium-fuelled light water reactors', Cambridge University Engineering Department, First Year Report
MAIER, A.M., MOULTRIE, J. and CLARKSON, P.J. (2012) 'Assessing organisational capabilities: Reviewing and guiding the development of maturity grids' in IEEE Transactions on Engineering Management, 59 (1), 138-159
MAIER, A.M., WYNN, D.C., ANDREASEN, M.M. and CLARKSON, P.J. (2012) 'A cybernetic perspective on methods and process models in collaborative designing' in 12th International Design Conference (DESIGN 2012), Dubrovnik, Croatia, 233-240
MEDEIROS, ACB., MIECZAKOWSKI, A. and CLARKSON, P.J. (2012) 'Designing for the ageing experience: Framework of influences on adoption and use of technology products by users in different life stages' in 12th International Design Conference (DESIGN 2012), Dubrovnik, Croatia, 2015-2024
MIECZAKOWSKI, A.K., LANGDON, P.M. and CLARKSON, P.J. (2012) 'Understandable by design: How can products be designed to align with user experience?' in Designing Inclusive Systems
MIECZAKOWSKI, A LANGDON, P.M. and CLARKSON, P.J. (2012) 'Investigating designers' and users' cognitive representations of products to assist inclusive interaction design' in Universal Access in the Information Society, 12 (3), 1-18
MOHAMAD, Y., DANGELMAIER, M., PEISSNER, M., BISWAS, P. and VELASCO, C.A. (2012) 'Virtual user models for designing and using of inclusive products: Introduction to the special thematic session' in Computers helping people with special needs, 7382, 284-287
NICHOLL, B., HOSKING, I.M., ELTON, E.M., LEE, Y., BELL, J. and CLARKSON, P.J. (2012) 'Inclusive design in the Key Stage 3 classroom: An investigation of teachers' understanding and implementation of user-centred design principles in design and technology' in International Journal of Technology and Design Education,
ROBINSON, S., WARD, J.R., BAGLIN, T., BROSTER, S., HEESOM-DUFF, C., PASCOE, G. and AHLUWALIA, J. (2012) 'The Clinical Area Safety Assessment (CASA), a peer review of safety across an acute trust' in Journal of Hospital Administration, 2 (2), 27-37
SCHOEN, K.L. and CRILLY, N. (2012) 'Implicit methods for testing product preference: Exploratory studies with the affective Simon task' in 8th International Design and Emotion Conference, London, UK,
SESHADRI, P. (2012) 'Uncertainty quantification and optimisation for compressor blade dynamics', Cambridge University Engineering Department, First Year Report
SIMSEKLER, M.C.E. (2012) 'Toward a hazard identification method for healthcare system quality improvement', Cambridge University Engineering Department, First Year Report
SIYAM, G.I., KIRNER, K., WYNN, D.C., LINDEMANN, U. and CLARKSON, P.J. (2012) 'Value and waste dependencies and guidelines' in 14th International Dependency and Structure Modelling Conference (DSM 2012), Kyoto, Japan,
SIYAM, G.I., KIRNER, K., WYNN, D.C., LINDEMANN, U. and CLARKSON, P.J. (2012) 'Relating value methods to waste types in lean product development' in 12th International Design Conference (DESIGN 2012), Dubrovnik, Croatia, 93-102
TENG, Y-C., HORBERRY, T. and WARD, J. (2012) 'Guidewire retention following central venous catheterization: A human factors engineering investigation'
VINCENT, C., WARD, J.R. and LANGDON, P.M. (2012) 'Unravelling complex systems' in The Ergonomist, 506, 12-13
WARD, J.R. (2012) 'Reducing the risk of retained guidewires', Issue 2
WOLLNER, P.K.A. (2012) 'Supporting the design process of inclusive user interfaces through implicit modeling', Cambridge University Engineering Department, First Year Report
WOLLNER, P.K.A., GOLDHABER, T., MIECZAKOWSKI, A., LANGDON, P.M., HOSKING, I.M. and CLARKSON, P.J. (2012) 'Evaluation of setup procedures on mobile devices based on users' initial experience' in NordDesign 2012, Aalborg, Denmark,
WYATT, D.F., WYNN, D.C., JARRETT, J.P. and CLARKSON, P.J. (2012) 'Supporting product architecture design using computational design synthesis with network structure constraints' in Research in Engineering Design, 23 (1), 17-52
WYNN, D.C., CASSIDY, S. and CLARKSON, P.J. (2012) 'Design of robust service operations using cybernetic principles and simulation' in 12th International Design Conference (DESIGN 2012), Dubrovnik, Croatia, 331-342
WYNN, D.C., KREIMEYER, M., CLARKSON, P.J. and LINDEMANN, U. (2012) 'Dependency modelling in complex system design' in Journal of Engineering Design,
YANG, M. (2012) 'Life cycle oriented sustainable design for product service systems (PSSs)', Cambridge University Engineering Department, First Year Report
ZITKUS, E., LANGDON, P.M. and CLARKSON, P.J. (2012) 'How to support designers effectively with knowledge about accessibility and inclusion' in 8th Conference of the International Committee for Design History and Design Studies, So Paulo, Brazil, (In press)
ZITKUS, E., LANGDON, P.M. and CLARKSON, P.J. (2012) 'Can computer graphic systems be used to inform designers about inclusivity?' in 12th International Design Conference (DESIGN 2012), Dubrovnik, Croatia, 599-606 (In press)
ZITKUS, E., LANGDON, P.M. and CLARKSON, P.J. (2012) 'Design advisor: How to supply designers with knowledge about inclusion' in Designing Inclusive Systems

2011

AHMAD, N., WYNN, D.C. and CLARKSON, P.J. (2011) 'Information models used to manage engineering change: A review of the literature 2005-2010' in 18th International Conference on Engineering Design (ICED'11), Copenhagen, Denmark,
AHMAD, N., WYNN, D.C. and CLARKSON, P.J. (2011) 'The evolution of information while building cross-domain models of a design: A video experiment' in 18th International Conference on Engineering Design (ICED'11), Copenhagen, Denmark,
ALBERS, A., BRAUN, A., SADOWSKI, E., WYNN, D.C., WYATT, D.F. and CLARKSON, P.J. (2011) 'System architecture modeling in a software tool based on the contact and channel approach (C&C-A)' in ASME Journal of Mechanical Design, 133 (10)
ARUK, N., JANSSON-BOYD, C. and CRILLY, N. (2011) 'What users know about the design process: A report on two exploratory studies' in 5th Conference on Designing Pleasurable Products and Interfaces (DPPI 11), Milan, Italy,
ATKINSON, S.R., CALDWELL, N.H.M., MAIER, A.M. and CLARKSON, P.J. (2011) 'Collaborative trust networks in engineering design adaptation' in 18th International Conference on Engineering Design (ICED'11), Copenhagen, Denmark, 7, 152-161
BENIUK, C. (2011) 'Applying inclusive design principles in the assessment of patient experience', MPhil-thesis, Cambridge University Engineering Department
BENIUK, K., BOYLE, A. and CLARKSON, P.J. (2011) 'Emergency department crowding: Prioritising quantified crowding measures using a Delphi study' in Emergency Medicine Journal,
BISWAS, P. and LANGDON, P.M. (2011) 'A new interaction technique based on eye tracking and single switch scanning' in 3rd Workshop on Multimodal Interfaces for Automotive Applications (MIAA) in conjunction with International Conference on Intelligent User Interfaces (IUI) 2011, Palo Alto, California, USA,
BISWAS, P. and LANGDON, P.M. (2011) 'Investigating the gravity well algorithm to help in pointing in electronic interfaces by motor-impaired users' in Journal of Assistive Technologies, 5 (3) (ISSN: 1754-9450)
BISWAS, P. and LANGDON, P.M. (2011) 'A new input system for disabled users involving eye gaze tracker and scanning interface' in Journal of Assistive Technologies, 5 (2) (ISSN: 1754-9450)
BISWAS, P. and LANGDON, P.M. (2011) 'The effect of hand strength on pointing performance of users for different input devices' in The 13th International ACM SIGACCESS Conference on Computers and Accessibility (ASSETS 2011)., Dundee, Scotland,
BISWAS, P. and LANGDON, P.M. (2011) 'Investigating the accessibility of program selection menus of a digital TV interface' in Human Computer Interaction International (HCII), Orlando, Florida, USA,
BISWAS, P. and LANGDON, P.M. (2011) 'Standardizing user models' in Human Computer Interaction International (HCII), Orlando, Florida, USA,
BISWAS, P. and LANGDON, P.M. (2011) 'Towards an inclusive world - a simulation tool to design interactive electronic systems for elderly and disabled users' in Service Research and Innovation Institute Global Conference (SRII 2011), San Jose, California, USA,
BISWAS, P. and ROBINSON, P. (2011) 'A brief survey on user modelling in HCI' in Intelligent Techniques for Speech, Image and Language Processing
BISWAS, P., DUARTE, C., COELHO, J. and LANGDON, P.M. (2011) 'Multimodal adaptation through simulation for digital TV interface' in EuroITV 2011, Lisbon, Portugal,
BISWAS, P., ROBINSON, P. and LANGDON, P.M. (2011) 'Designing inclusive interfaces through user modelling and simulation' in International Journal of Human-Computer Interaction, 1044-7318
BISWAS, P ROBINSON, P. (2011) 'Evaluating interface layout for visually and mobility impaired users through simulation' in Universal Access in the Information Society, 12 (1)
BIZARD, A.F.M. and SYMONS, D.D. (2011) 'Flow of wet powder in a conical centrifugal filter - an analytical model' in Chemical Engineering Science, 66 (23), 6014-6027
BRADLEY, M.D., LANGDON, P.M. and CLARKSON, P.J. (2011) 'Older user errors in handheld touchscreen devices: To what extent is prediction possible?' in 14th International Conference on Universal Access in Human-Computer Interaction (Part II), Orlando, Florida, USA, 131-139
BUCKLE, P., WARD, J.R., ANDERSON, J., LIM, R., BERMAN, J. and CLARKSON, P.J. (2011) 'Developing prospective hazard analysis in healthcare: Evaluating the operating theatre environment using a new toolkit' in International Conference on Healthcare Systems Ergonomics and Patient Safety, Oviedo, Spain,
CALDWELL, N.H.M., POOLE, J.R., BRETON, B.C. and HOLBURN, D.M. (2011) 'Experimental observations on FIB milling using a custom software interface' in Microscopy and Microanalysis, 17 (Supplement S2), 674-675
CARD, A.J., WARD, J.R. and CLARKSON, P.J. (2011) 'Risk control after root cause analysis: A systematic literature review' in International Conference on Healthcare Systems Ergonomics and Patient Safety, Oviedo, Spain,
CARD, A.J., WARD, J.R. and CLARKSON, P.J. (2011) 'Risk assessment techniques in public health administration: A systematic review' in The American Public Health Association's 139th Annual Meeting, Washington, DC,
COATES, D.J. (2011) 'The implication of actinide generation and destruction in accelerator driven sub-critical reactors', PhD-thesis, Cambridge University Engineering Department
COELHO, J., DUARTE, C., BISWAS, P. and LANGDON, P.M. (2011) 'Developing accessible TV applications' in The 13th International ACM SIGACCESS Conference on Computers and Accessibility (ASSETS 2011)., Dundee, Scotland,
CRILLY, N. (2011) 'Do users know what designers are up to? Product experience and the influence of persuasive intentions.' in International Journal of Design, 5 (3), 1-15 (In press)
CRILLY, N. (2011) 'The design stance in user-system interaction' in Design Issues, 27 (4), 16-29
DE LESSIO, M.P. (2011) 'Assessing the complex product design process planning activity', PhD-thesis, Cambridge University Engineering Department
DUARTE, C., LANGDON, P.M., JUNG, C., COELHO, J., BISWAS, P. and HAMISU, P. (2011) 'GUIDE - Creating accessible TV applications' in 11th European Association for the Advancement of Assistive Technology in Europe Conference (AAATE), Maastricht, The Netherlands,
DUSCH, B., CRILLY, N. and MOULTRIE, J. (2011) 'From attitude to action: The development of the Cambridge Sustainable Design Toolkit' in 1st Cambridge Academic Design Management Conference, Cambridge, UK,
EASTWOOD, J.P. and JARRETT, J.P. (2011) 'Towards designing with 3D bumps for wing drag reduction' in 49th AIAA Aerospace Sciences Meeting, Orlando, Florida, USA,
ECKERT, C.M., KELLER, R. and CLARKSON, P.J. (2011) 'Change prediction in innovative products to avoid emergency innovation' in International Journal of Technology Management, 55 (3-4), 226-237
GHISU, T., JARRETT, J.P. and PARKS, G.T. (2011) 'Robust design optimization of airfoils with respect to ice accretion' in AIAA Journal of Aircraft, 48 (1), 287-304
GHISU, T., PARKS, G.T., JARRETT, J.P. and CLARKSON, P.J. (2011) 'An integrated system for the aerodynamic design of compression systems - Part I: Development' in ASME Journal of Turbomachinery, 133 (1)
GHISU, T., PARKS, G.T., JARRETT, J.P. and CLARKSON, P.J. (2011) 'Robust design optimization of gas turbine compression systems' in AIAA Journal of Propulsion and Power, 27 (2), 282-295 (in press)
GHISU, T., PARKS, G.T., JARRETT, J.P. and CLARKSON, P.J. (2011) 'An integrated system for the aerodynamic design of compression systems - Part II: Application' in ASME Journal of Turbomachinery, 133 (1)
GOODMAN-DEANE, J., WALLER, S.D., SARHAN, A., CALDWELL, N.H.M. and CLARKSON, P.J. (2011) 'Simulation software: Providing insight into the effects of vision and hearing impairments' in International Conference on Inclusive Design and Communications (INCLUDE 2011), The Royal College of Art, London, UK,
GOODMAN-DEANE, J., WALLER, S.D., WILLIAMS, E., LANGDON, P.M. and CLARKSON, P.J. (2011) 'Estimating exclusion: A tool to help designers' in International Conference on Inclusive Design and Communications (INCLUDE 2011), The Royal College of Art, London, UK,
HAMISU, P., HEINRICH, G., JUNG, C., HAHN, V., DUARTE, C., LANGDON, P.M. and BISWAS, P. (2011) 'Accessible UI design and multimodal interaction through hybrid TV platforms: Towards a virtual-user centered design framework' in Human Computer Interaction International (HCII), Orlando, Florida, USA,
HAMRAZ, B. (2011) 'Integrated engineering change prediction and analysis', Cambridge University Engineering Department, First Year Report
HEMPE, E-M. (2011) 'Knowledge flows in service design - A framework' in 44th Annual Hawaii International Conference on System Sciences, Kauai, Hawaii, USA,
HEMPE, E-M. (2011) 'Applicability of engineering design processes in the design of integrated intellectual disabilities services in England', PhD-thesis, Cambridge University Engineering Department
JAGTAP, S. and JOHNSON, A.L. (2011) 'In-service information required by engineering designers' in Research in Engineering Design, 22, 207-221
JARRATT, T.A.W., ECKERT, C.M., CALDWELL, N.H.M. and CLARKSON, P.J. (2011) 'Engineering change: An overview and perspective on the literature' in Research in Engineering Design, 22 (2), 103-124
JOKISUU, E., LANGDON, P.M. and CLARKSON, P.J. (2011) 'Modelling cognitive impairment to improve universal access' in 14th International Conference on Universal Access in Human-Computer Interaction (Part 2), Orlando, Florida, USA, 6766 LNCS (Part 2), 42-50
JUN, G.T., MORRIS, Z., ELDABI, T., HARPER, P., NASEER, A., PATEL, B. and CLARKSON, P.J. (2011) 'Development of modelling method selection tool for health services management: From problem structuring methods to modelling and simulation methods' in BMC Health Services Research, 11 (108)
KERLEY, W.P., ARMSTRONG, G., PEPE, C., MOSS, M.A. and CLARKSON, P.J. (2011) 'Using simulation to support process integration and automation of the early stages of aerospace design' in 18th International Conference on Engineering Design (ICED'11), Copenhagen, Denmark, 1, 134-146
KERLEY, W.P., WYNN, D.C., ECKERT, C.M. and CLARKSON, P.J. (2011) 'Redesigning the design process through interactive simulation: A case study of life-cycle engineering in jet engine conceptual design' in International Journal of Services and Operations Management, 10 (1), 30-51
KOMASHIE, A., JUN, G.T., DODDS, S., RAYNER, H., THANE, S., MITCHELL-BAKER, A. and CLARKSON, P.J. (2011) 'Sick systems: Towards a generic conceptual representation of healthcare systems' in 18th International Conference on Engineering Design (ICED'11), Copenhagen, Denmark, 4, 430-440
LATHAM, K., WALLER, S.D. and SCHIATEL, J. (2011) 'Do best practice guidelines improve the legibility of pharmacy labels for the visually impaired?' in Ophthalmic Physiological Optics, 31 (3), 275-282
MADABHUSHI, S., WARD, J.R., PASCOE, G. and CLARKSON, P.J. (2011) 'Engineering surgery: A novel approach for assessing risk in healthcare systems using a case stufy of the urgent cancer referral process' in Barts & The London National Undergraduate Surgical Conference, London, UK,
MAIER, A.M., DONMEZ, D., HEPPERLE, C., KREIMEYER, M., LINDEMANN, U. and CLARKSON, P.J. (2011) 'Improving communication in design: Recommendations from the literature' in 18th International Conference on Engineering Design (ICED'11), Copenghagen, Denmark,
MAIER, A.M., MOULTRIE, J. and CLARKSON, P.J. (2011) 'Maturity grids as tools for change management' in The changing paradigm of consulting: Adjusting to the fast-paced world
MAIER, A.M., MOULTRIE, J. and CLARKSON, P.J. (2011) 'Developing and applying maturity grids to assess organisational capabilities: Practitioner guidance through field expertise' in The changing paradigm of consulting
MASKO, M.L., ECKERT, C.M., CALDWELL, N.H.M. and CLARKSON, P.J. (2011) 'Designing for resilience: Using a Delphi study to identify resilience issues for hospital designs in a changing climate' in 18th International Conference on Engineering Design (ICED'11), Copenhagen, Denmark, 5, 60-69
MEDEIROS, A.C.B. (2011) 'Designing for the ageing experience', PhD-thesis, Cambridge University Engineering Department
MEDEIROS, A.C.B., CRILLY, N. and CLARKSON, P.J. (2011) 'The influence of ageing on user experience' in Handbook of research on trends in product design and development, 348-364
MIECZAKOWSKI, A.K. (2011) 'Modelling interaction between product features and human capabilities', PhD-thesis, Cambridge University Engineering Department
MIECZAKOWSKI, A.K., GOLDHABER, T.S. and CLARKSON, P.J. (2011) 'Culture, communication and change: Report on an investigation of the use and impact of modern media and technology in our lives', BT
MIECZAKOWSKI, A.K., GOLDHABER, T.S. and CLARKSON, P.J. (2011) 'Culture, communication and change: Reflections on the use and impact of modern media and technology in our lives', BT
MIECZAKOWSKI, A.K., GOLDHABER, T.S. and CLARKSON, P.J. (2011) 'Culture, communication and change: Summary an investigation of the use and impact of modern media and technology in our lives', BT
MIECZAKOWSKI, A.K., LANGDON, P.M. and CLARKSON, P.J. (2011) 'An approach towards considering users' understanding in product design' in 14th International Conference on Universal Access in Human-Computer Interaction (Part I), Orlando, Florida, USA, 6765 LNCS (Part 1), 90-99
MOHAMAD, Y., BISWAS, P., LANGDON, P.M., PEISSNER, M., DANGELMAIER, M., JUNG, C., WOLF, P. and KAKLANIS, N. (2011) 'Standardisation of user models for designing and using inclusive products' in Joint Virtual Reality Conference (JVRC2011), Nottingham, UK,
MORRIS, Z.S., BOYLE, A., BENIUK, K. and ROBINSON, S. (2011) 'Emergency department crowding: Towards an agenda for evidence-based intervention' in Emergency Medicine Journal, (In press)
NAUMANN, A.B., HURTIENNE, J., GOLLNER, S., LANGDON, PM. and CLARKSON, P.J. (2011) 'Technology supporting the everyday life of people with dementia' in International Conference on Inclusive Design and Communications (INCLUDE 2011), The Royal College of Art, London, UK,
NICHOLL, B., HOSKING, I., ELTON, E.M., LEE, Y., BELL, J. and CLARKSON, P.J. (2011) ''...we're not designing for a specific user at key stage 3'. Teachers' lack of planning of user-centred tasks in Design and Technology at Key Stage 3 in England and implication this has for pupilsÄô understanding of complex design tasks' in PATT 25/CRIPT 8, London, UK,
PARISINI, I., CHENG, S.J., SYMONS, D.D., BROWN, M.B., KOSTRZEWSKI, A. and MURNANE, D. (2011) 'Assessment of a cyclone-type spacer for use in dry powder inhalation' in Drug Delivery to the Lungs Conference (DDL22), Edinburgh, UK,
PERSAD, U. (2011) 'Exploring a capability-demand interaction model for inclusive design evaluation', PhD-thesis, Cambridge University Engineering Department
PERSAD, U., LANGDON, P.M. and CLARKSON, P.J. (2011) 'Investigating the relationships between user capabilities and product demands for older and disabled users' in 14th International Conference on Universal Access in Human-Computer Interaction (Part I), Orlando, Florida, USA, 6765 LNCS (Part 1), 110-118
SCHMITZ, S.F., WYNN, D.C BIEDERMANN, W., CLARKSON, P.J. and LINDEMANN, U. (2011) 'Improving data quality in DSM modelling: A structural comparison approach' in 18th International Conference on Engineering Design (ICED'11), Copenhagen, Denmark,
SEIDEL, D., HJALMARSON, J., FREITAG, S., LARSSON, T.J., BRAYNE, C. and CLARKSON, P.J. (2011) 'Measurement of stressful postures during daily activities: An observational study with older people' in Gait and Posture, 34 (3), 397-401
SIYAM, G.I. (2011) 'Reconceptualizing value in product development: Value cycle map and value stream network', Cambridge University Engineering Department, First Year Report
SIYAM, G., WYNN, D.C. and CLARKSON, P.J. (2011) 'Re-conceptualising value in the engineering design process: The Value Cycle Map' in 18th International Conference on Engineering Design (ICED'11), Copenhagen, Denmark,
SYMONS, D.D. (2011) 'Integral methods for flow in a conical centrifuge' in Chemical Engineering Science, 66 (13), 3020-3029
SYMONS, D.D. (2011) 'Frictional flow of damp granular material in a conical centrifuge' in Proceedings - Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science,
WARD, J.R., BUCKLE, P., ANDERSON, J., LIM, R., BERMAN, J. and CLARKSON, P.J. (2011) 'Developing prospective hazard analysis in healthcare: Evaluating medicine management at hospital discharge using a new toolkit' in International Conference on Healthcare Systems Ergonomics and Patient Safety, Oviedo, Spain,
WILKINSON, C. (2011) 'Evaluating the role of prior experience in inclusive design', PhD-thesis, Cambridge University Engineering Department
WILKINSON, C., LANGDON, P.M. and CLARKSON, P.J. (2011) 'Evaluating the design, use and learnability of household products for older individuals' in 14th International Conference on Universal Access in Human-Computer Interaction (Part 2), Orlando, Florida, USA, 6766 LNCS (Part 2), 250-259
WYATT, D.F. (2011) 'Developing a computational approach to support product architecture design', PhD-thesis, Cambridge University Engineering Department
WYNN, D.C., ECKERT, C.M. and CLARKSON, P.J. (2011) 'Simulating intertwined design processes that have similar structures: A case study of a small company that creates made-to-order fashion products' in International Journal on Product Development, 14 (1-4), 118-143
WYNN, D.C., GREBICI, K. and CLARKSON, P.J. (2011) 'Modelling the evolution of uncertainty levels during design' in International Journal on Interactive Design and Manufacturing, 5 (3), 187-202
ZITKUS, E. (2011) 'Towards interactive techniques to supply designers with knowledge about inclusion', Cambridge University Engineering Department, First Year Report
ZITKUS, E., LANGDON, P.M. and CLARKSON, P.J. (2011) 'Accessibility evaluation: Assistive tools for design activity in product development.' in 1st International Conference on Sustainable Intelligent Manufacturing, Leiria, Portugal, (In press)

2010

AHMAD, N. (2010) 'Supporting the management of the engineering change process through a cross-domain traceability model', Thesis-PhD, University of Cambridge
AHMAD, N., WYNN, D.C. and CLARKSON, P.J. (2010) 'Development and evaluation of a tool to estimate the impact of design change' in 11th International Design Conference (DESIGN 2010), Dubrovnik, Croatia,
AHMAD, N., WYNN, D.C. and CLARKSON, P.J. (2010) 'When should design changes be allowed to accumulate?' in IDMME - Virtual Concept 2010, Bordeaux, France,
AHMAD, N., WYNN, D.C. and CLARKSON, P.J. (2010) 'The impact of packaging interdependent change requests on project lead time' in 12th International Dependency and Structure Modelling Conference (DSM 2010), Cambridge, UK,
ALBERS, A., BRAUN, A., SADOWSKI, E., WYATT, D.F., WYNN, D.C. and CLARKSON, P.J. (2010) 'Contact and channel modelling using part and function libraries in a function-based design approach' in ASME 2010 International Design Engineering Technical Conference & Computers and Information in Engineering Conference (IDETC/CIE 2010), Montreal, Quebec, Canada,
ARIYO, O., HEISIG, P., WILSON, P.A., HARNDEN, M. and CLARKSON, P.J. (2010) 'Using connectivity models to support design reviews' in 12th International Dependency and Structure Modelling Conference (DSM 2010), Cambridge, UK,
ARIYO, O.O., ECKERT, C.M. and CLARKSON, P.J. (2010) 'Towards a decentralised approach to modelling connectivity in complex products' in ASME 2010 International Design Engineering Technical Conference & Computers and Information in Engineering Conference (IDETC/CIE 2010), Montreal, Quebec, Canada,
AURISICCHIO, M., BRACEWELL, R.H. and WALLACE, K.M. (2010) 'Understanding how the information requests of aerospace engineering designers influence information-seeking behaviour' in Journal of Engineering Design, 21 (6), 707-730
BERGMANN, J.H.M., LANGDON, P.M. and MAYAGOITIA, R.E. (2010) 'Experimental validation of movement patterns of the upper extremity based on body-worn sensors' in 5th Cambridge Workshop on Universal Access and Assistive Technology (CWUAAT 2010), Fitzwilliam College, Cambridge, UK,
BISWAS, P. and LANGDON, P.M. (2010) 'A prototype of the GUIDE user model' in Workshop on Accessibility, User Profiling and Adaptation at the 24th British Computer Society Conference on Human-Computer Interaction (HCI 2010), Dundee, Scotland,
BIZARD, A.F.M., SYMONS, D.D., FLECK, N.A. and DURBAN, D. (2010) 'Flow of damp powder in a rotating impervious cone' in Journal of Applied Mechanics, 78 (2), 021017-1-10
BOYLE, A. and BENIUK, K. (2010) 'Overcrowding: Emergency departments are the canary in the coal mine and overcrowding is poisonous gas' in European Journal of Emergency Medicine, 17 (6), 349-353
BRADLEY, M.D., LLOYD, A.D. and BARNARD, Y.F. (2010) 'Digital inclusion: is it time to start taking an exclusion approach to interface design?' in Contemporary Ergonomics and Human Factors 2010
BUCKLE, P., CLARKSON, P.J., COLEMAN, R., BOUND, J., WARD, J.R. and BROWN, J. (2010) 'Systems mapping workshops and their role in understanding medication errors in healthcare' in Applied Ergonomics, 41 (5), 645-656
CALDWELL, N.H.M., MARTIN, G.C., MITCHELL, A.L., HOLBURN, D.M. and BRETON, B.C. (2010) 'Virtual SEM (VSEM) - Ongoing development of teaching resources' in Microscopy Today, , 32-36
CALDWELL, N.H.M., SHOAIB, A.R.M., BRETON, B.C. and HOLBURN, D.M. (2010) 'Applying the Google Earth paradigm to microscopical specimen mapping' in Microscopy and Microanalysis, 16 (Supplement S2), 732-733
CARD, A.J. (2010) 'Toward a method for active risk control in healthcare', Cambridge University Engineering Department, First Year Report
CHALUPNIK, M.J. (2010) 'Design process robustness', PhD-thesis, Cambridge University Engineering Department
CHENG, S. and SYMONS, D.D. (2010) 'Simulation of cyclone separators in dry powder inhalers' in International Aerosol Conference, Helsinki, Finland,
CHENG, S. and SYMONS, D.D. (2010) 'Optimisation of dry powder inhalers through robust CFD simulation of air classifiers' in Drug Delivery to the Lungs Conference (DDL21), Edinburgh, UK,
CHENG, S.J., CHIH-HSIN LIU, J. and SYMONS, D.D. (2010) 'Medical device postmarket surveillance in the United States: Signal detection in Class I recalls', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR146
CLARKSON, P.J. and COLEMAN, R. (2010) 'Inclusive design (editorial)' in Journal of Engineering Design, 21 (2-3), 127-129
CLARKSON, P.J., LANGDON, P.M. and ROBINSON, P. (2010) 'Proceedings, 5th Cambridge Workshop on Universal Access and Assistive Technology', Cambridge University Engineering Department CUED/C-EDC/TR150
COATES, D.J. and PARKS, G.T. (2010) 'Isotope equilibrium in fast thorium reactors' in OECD Nuclear Energy Agency International Workshop on Technology and Components of Accelerator Driven Systems, Karlsruhe, Germany, (In press)
COATES, D.J. and PARKS, G.T. (2010) 'Actinide evolution and equilibrium in fast thorium reactors' in Annals of Nuclear Energy, 37 (8), 1076-1088
CRILLY, N. (2010) 'The roles that artefacts play: technical, social and aesthetic functions' in Design Studies, 31 (4), 311-344
CRILLY, N. (2010) 'The structure of design revolutions: Kuhnian paradigm shifts in creative problem solving' in Design Issues, 26 (1), 54-66
CRILLY, N. (2010) 'Non-technical artefact functions' in CEPHAD 2010 - The borderland between philosophy and design research, Copenhagen, Denmark, 1-8
DALKE, H., CONDUIT, G.J., CONDUIT, B.D., COOPER, R.M., CORSO, A. and WYATT, D.F. (2010) 'A colour contrast assessment system: Design for people with visual impairment' in Designing inclusive interactions
DE LESSIO, M.P., CALDWELL, N.H.M., WYNN, D.C. and CLARKSON, P.J. (2010) 'Analysing plan content using a matrix-based approach' in 12th International Dependency and Structure Modelling Conference (DSM 2010), Cambridge, UK,
DE LESSIO, M.P., WYNN, D.C. and CLARKSON, P.J. (2010) 'Modelling the design process planning system' in 11th International Design Conference (DESIGN 2010), Dubrovnik, Croatia,
DUSCH, B., CRILLY, N. and MOULTRIE, J. (2010) 'Revisiting sustainable design strategies' in 15th International Conference on Sustainable Innovation, Rotterdam, The Netherlands,
DUSCH, B., CRILLY, N. and MOULTRIE, J. (2010) 'Developing a framework for mapping sustainable design activities' in Design and Complexity DRS 2010, Montreal, Canada,
ECKERT, C.M. and CLARKSON, P.J. (2010) 'Planning development processes for complex products' in Research in Engineering Design, 21 (3), 153-171
ECKERT, C.M. and STACEY, M.K. (2010) 'What is a process model? Reflections on the epistemology of design process models' in Modelling and management of engineering processes
ECKERT, C.M., WYNN, D.C. and CLARKSON, P.J. (2010) 'Design customisation in multi-project environments: Using process simulation to explore the issues' in 8th International Symposium on Tools and Methods of Competitive Engineering (TMCE 2010), Ancona, Italy,
ELDABI, T., CLARKSON, P.J., CONNELL, C., KLEIN, H.J. and JUN, G.T. (2010) 'Model driven healthcare: Disconnected practices' in Winter Simulation Conference 2010, Baltimore, USA,
GAUDERN, N. and SYMONS, D.D. (2010) 'Comparison of theoretical and numerical buckling loads for wind turbine blade panels' in Wind Engineering, 34 (2), 193-206
GHISU, T., PARKS, G.T., JAEGGI, D.M., JARRETT, J.P. and CLARKSON, P.J. (2010) 'The benefits of adaptive parametrization in multi-objective Tabu search optimization' in Engineering Optimization, 42 (10), 959-981
GHISU, T., PARKS, G.T., JARRETT, J.P. and CLARKSON, P.J. (2010) 'Adaptive polynomial chaos for gas turbine compression systems performance analysis' in AIAA Journal, 48 (6), 1156-1170
GONCALVES, L.V.N., AHMAD, A., PARKS, G.T., NUTTALL, W.J. and STEER, S.J. (2010) 'A comparison of ADSR concepts for power generation' in OECD Nuclear Energy Agency International Workshop on Technology and Components of Accelerator Driven Systems, Karlsruhe, Germany,
GOODMAN-DEANE, J., LANGDON, P.M. and CLARKSON, P.J. (2010) 'Key influences on the user-centred design process' in Journal of Engineering Design, 21 (2-3), 345-373
GOODMAN-DEANE, J., WARD, J.R., HOSKING, I.M. and CLARKSON, P.J. (2010) 'Comparison of the usability of three autoinjectors', Cambridge University Engineering Department, Technical Report
HAHN, V., HAMISU, P., JUNG, C., HEINRICH, G., DUARTE, C. and LANGDON, P.M. (2010) 'Workshop accessibleTV "accessible user interfaces for future TV applications"' in 1st International Joint Conference on Ambient Intelligence (AML 2010), Malaga, Spain,
HEISIG, P., CALDWELL, N.H.M., GREBICI, K. and CLARKSON, P.J. (2010) 'Exploring knowledge and information needs in engineering from the past and for the future - results from a survey' in Design Studies, 31 (5), 499-532
HEISIG, P., CLARKSON, P.J. and VAJNA, S. (2010) 'Proceedings, 1st International Conference on Modelling and Management Engineering Processes', Cambridge University Engineering Department CUED/C-EDC/TR151
HEISIG, P., CLARKSON, P.J. and VAJNA, S. (2010) 'Modelling and management of engineering processes', Springer Verlag
HEMPE, E-M., DICKERSON, T.L., CLARKSON, P.J. and HOLLAND, A. (2010) 'Health and social care services for people with complex needs: The importance of context in the design process' in The Nordic Conference on Service Design and Service Innovation (ServDes 2010), Linkping, Sweden,
HEMPE, E-M., DICKERSON, T.L., HOLLAND, A. and CLARKSON, P.J. (2010) 'Framework for design research in health and care services' in 1st International Conference on Exploring Services Science (IESS 2010), Geneva, Switzerland, 53, 125-135
HEMPE, E-M., DICKERSON, T.L., HOLLAND, A. and CLARKSON, P.J. (2010) 'Analyzing design practice in a specialist service for people with ID' in Journal of Applied Research Intellect, 23 (5), 483-483 (Healthcare Design)
HINRICHS, S., DICKERSON, T.L. and CLARKSON, P.J. (2010) 'A case study of design methods applied to researching medical device purchasing processes' in Australasian Medical Journal, 3 (8), 471-487
HOSKING, I.M., WALLER, S.D. and CLARKSON, P.J. (2010) 'It is normal to be different: Applying inclusive design in industry' in Interacting with Computers, 22 (6), 496-501
HURTIENNE, J., HORN, A-M. and LANGDON, P.M. (2010) 'Facets of prior experience and their impact on product usability for older users' in Designing inclusive interactions
HURTIENNE, J., STüEL, C., STURM, C., MAUS, A., RTTING, M., LANGDON, P.M. and CLARKSON, P.J. (2010) 'Physical gestures for abstract concepts. Inclusive design with primary methaphors' in Interacting with Computers, 22 (6), 475-484
JAFRI, T. (2010) 'A stakeholder-led systems approach to medication safety', PhD-thesis, University of Cambridge
JAGTAP, S. and JOHNSON, A.L. (2010) 'Requirements and use of in-service information in an engineering re-design task: Case studies from the aerospace industry' in Journal of the American Society for Information Science and Technology,
JAHANGIRIAN, M., ELDABI, T., GARG, L., JUN, G.T., NASEER, A., PATEL, B., STERGIOULAS, L. and YOUNG, T. (2010) 'A rapid review method for extremely large corpora of literature: Applications to the domains of modelling, simulation and management' in International Journal of Information Management,
JOHNSON, D., CLARKSON, P.J. and HUPPERT, F. (2010) 'Capability measurement for inclusive design' in Journal of Engineering Design, 21 (2-3), 275-288
JUN, G.T. (2010) 'Process mapping: What type of map to use when?' in BMJ Letters,
JUN, G.T., BENIUK, K. and CLARKSON, P.J. (2010) 'What service designers can learn from policy designers' in Journal of Service Design (Touchpoint) - Service Design and Behavioural Change, 2 (1)
JUN, G.T., HINRICHS, S., JAFRI, T. and CLARKSON, P.J. (2010) 'Thinking with simple diagrams in healthcare systems design' in 11th International Design Conference (DESIGN 2010), Dubrovnik, Croatia,
JUN, G.T., WARD, J.R. and CLARKSON, P.J. (2010) 'Systems modelling approaches to the design of safe healthcare delivery: ease of use and usefulness perceived by healthcare workers' in Ergonomics, 53 (7), 829-847
KELLER, R., ECKERT, C.M. and CLARKSON, P.J. (2010) 'Change prediction for mass customized products: A product model view' in Handbook of Research in Mass Customization and Personalization
KERLEY, W.P. and CLARKSON, P.J. (2010) 'Modelling the quality of engineering designs' in Modelling and management of engineering processes
KILPINEN, M., NAUCK, D., ROSHER, P. and CLARKSON, P.J. (2010) 'Process standardisation using reusable process blocks' in 1st International Conference on Modelling and Management Engineering Processes (MMEP 2010), Department of Engineering, University of Cambridge, Cambridge, UK, (Process Management)
KIPOUROS, T., PACHIDIS, V., GHISU, T. and TEMPLALEXIS, I. (2010) 'Characterisation of the uncertainties of the operating conditions in turbomachinery design' in ASME Turbo Expo 2010, Glasgow, Scotland, UK,
KOH, E.C.Y. (2010) 'Managing change propagation in the development of complex products', Thesis-PhD, Cambridge University
KREIMEYER, M., WYNN, D.C., CLARKSON, P.J. and LINDEMANN, U. (2010) 'Profiling PD processes by combining structural analysis and simulation' in 11th International Design Conference (DESIGN 2010), Dubrovnik, Croatia,
KWIATKOWSKI, A., PALMER, P.R., MOLINA-CRISTOBAL, A., BRIDGEMAN, R. and PARKS, G.T. (2010) 'Simulating the RRS James Clark Ross as part of a multiobjective design process' in 6th IEEE Vehicle Power and Propulsion Conference (VPPC'10), Lille, France,
LANGDON, P.M. and HOSKING, I.M. (2010) 'Inclusive wireless technology for emergency communications in the UK' in International Journal of Emergency Management, 7 (1), 47-58
LANGDON, P.M. and THIMBLEBY, H. (2010) 'Inclusion and interaction: Designing interaction for inclusive populations' in Interacting with Computers, 22 (6), 439-448
LANGDON, P.M., CLARKSON, P.J. and ROBINSON, P. (2010) 'Designing inclusive interactions', Springer Verlag
LANGDON, P.M., CLARKSON, P.J. and ROBINSON, P. (2010) 'Designing inclusive futures' in Universal Access in the Information Society, 9 (3), 191-193
LANGDON, P.M., GONZALEZ, M.F. and BISWAS, P. (2010) 'Designing studies for requirements and modelling of users for an accessible set-top box' in 8th International Conference on Disability, Virtual Reality and Associated Technologies (ICDVRAT 2010), Via del Mar/Valparaso, Chile,
LANGDON, P.M., LEWIS, T. and CLARKSON, P.J. (2010) 'Prior experience in the use of domestic product interfaces (editorial)' in Universal Access in the Information Society, 9 (3), 209-225
LE, H.N., WYNN, D.C. and CLARKSON, P.J. (2010) 'Re-designing PD process architecture by transforming task network models into system dynamics models' in 11th International Design Conference (DESIGN 2010), Dubrovnik, Croatia,
LE, H.N., WYNN, D.C. and CLARKSON, P.J. (2010) 'Modelling the influence of uncertainty, process architecture and feedback dynamics on PD projects' in 12th International Dependency and Structure Modelling Conference (DSM 2010), Cambridge, UK,
LE, H.N., WYNN, D.C. and CLARKSON, P.J. (2010) 'Evaluating the positive and negative impact of iteration in engineering processes' in Modelling and management of engineering processes
LE, H.N., WYNN, D.C. and CLARKSON, P.J. (2010) 'Evaluating the impacts of iteration on PD processes by transforming task network models into system dynamics models' in ASME 2010 International Design Engineering Technical Conference & Computers and Information in Engineering Conference (IDETC/CIE 2010), Montreal, Quebec, Canada,
LLOYD, A.D., BARNARD, Y.F. and BRADLEY, M.D. (2010) 'Building relationships with the invisible in the digital economy' in 5th Cambridge Workshop on Universal Access and Assistive Technology (CWUAAT 2010), Fitzwilliam College, Cambridge, UK,
LLOYD, A.D., HOSKING, I. and BRADLEY, M.D. (2010) 'Building the BRIDGE: Closing the gap on digital exclusion' in Mapping the Impact of Online Information on the Political, Economic and Social Sphere, Google, London, UK,
MEDEIROS, A.C.B. (2010) 'Consumption patterns and technology adoption: The ageing process and the design of sustainable products' in Product design in the sustainable era
MIECZAKOWSKI, A.K., LANGDON, P.M., BRACEWELL, R.H. and CLARKSON, P.J. (2010) 'Toward a model of product-user interaction: A new data modelling approach for designers' in 11th International Design Conference (DESIGN 2010), Dubrovnik, Croatia,
MIECZAKOWSKI, A., LANGDON, P.M. and CLARKSON, P.J. (2010) 'Investigating designers' cognitive representations for inclusive interaction between products and users' in Designing inclusive interactions
MOLINA-CRISTOBAL, A., PALMER, P.R., SKINNER, B.A. and PARKS, G.T. (2010) 'Multi-fidelity simulation modelling in optimisation of a submarine propulsion system' in 6th IEEE Vehicle Power and Propulsion Conference (VPPC'10), Lille, France,
MORRISON, C., BLACKWELL, A.F. and VUYLSTEKE, A. (2010) 'Practitioner-customizable clinical information systems: A case study to ground further research and development opportunities' in Journal of Healthcare Engineering, 1 (3), 297-314
NAUMANN, A., WECHSUNG, I. and HURTIENNE, J. (2010) 'Multimodality, inclusive design and intuitive use' in 23rd British Computer Society Human Computer Interaction Workshop and Conference (HCI 2009), Cambridge, UK,
NAUMANN, A., WECHSUNG, I. and HURTIENNE, J. (2010) 'Multimodality, inclusive design and intuitive use' in Interacting with Computers,
SEIDEL, D. (2010) 'Design for independent living activity demands and older people's capabilities', PhD-thesis, University of Cambridge
SEIDEL, D., BRAYNE, C. and CLARKSON, P.J. (2010) 'Inclusive task environments for the aged' in 5th Cambridge Workshop on Universal Access and Assistive Technology (CWUAAT 2010), Fitzwilliam College, Cambridge, UK, (Inclusive Design)
SEIDEL, D., RICHARDSON, K., CRILLY, N., MATTHEWS, F.E., CLARKSON, P.J. and BRAYNE, C. (2010) 'Design for independent living: Activity demands and capabilities of older people' in Ageing & Society 2010, 30 (7), 1239-1255
SEIDEL, D., RICHARDSON, K., JAGGER, C., BRAYNE, C. and CLARKSON, P.J. (2010) 'The potential impact of design changes for independent living in old age' in Gerontechnology 2010, 9 (1), 56-61
STEER, S.J., CARDIN, M-A., NUTTALL, J.J., PARKS, G.T. and GONCALVES, L.V.N. (2010) 'Assessing the economic value of constructing multiple accelerators for an accelerator-driven subcritical reactor' in OECD Nuclear Energy Agency International Workshop on Technology and Components of Accelerator Driven Systems, Karlsruhe, Germany,
SYMONS, D.D., PERSAUD, R. and STANISLAUS, H. (2010) 'Slip modulus of inclined screws in timber-concrete floors' in Proceedings of the Institution of Civil Engineers: Structures and Buildings, 163 (SB4), 245-255
SYMONS, D.D., PERSAUD, R. and STANISLAUS, H. (2010) 'Strength of inclined screw shear connections for timber and concrete composite construction' in The Structural Engineer, 88 (1), 25-32
TICEHURST, A., WARD, J.R. and CLARKSON, P.J. (2010) 'Barriers to design in healthcare' in Australasian Medical Journal, 3 (9), 570-579
WALLER, S.D., LANGDON, P.M. and CLARKSON, P.J. (2010) 'Using disability data to estimate design exclusion' in Universal Access in the Information Society., 9 (3), 195-207
WALLER, S.D., LANGDON, P.M. and CLARKSON, P.J. (2010) 'Designing a more inclusive world' in Journal of Integrated Care, 18 (4), 19-25
WALLER, S.D., WILLIAMS, E.Y., LANGDON, P.M. and CLARKSON, P.J. (2010) 'Quantifying exclusion for tasks related to product interaction' in Designing inclusive interactions
WALLER, S.D., WILLIAMS, E.Y., LANGDON, P.M. and CLARKSON, P.J. (2010) 'Understanding the co-occurrence of ability loss' in Designing inclusive interactions
WANG, H. and ZHANG, H. (2010) 'A distributed and interactive system to integrated design and simulation for collaborative product development' in Journal of Robotics and Computer-Integrated Manufacturing, (In press)
WARD, J.R. (2010) 'Re:Re:Re:Intangible Benefits/Risks of Carbon Fibre Bicycles' in BMJ Letters,
WARD, J.R., BUCKLE, P. and CLARKSON, P.J. (2010) 'Designing packaging to support the safe use of medicines at home' in Applied Ergonomics, 41, 682-694
WARD, J.R., CLARKSON, P.J., BUCKLE, P., BERMAN, J., LIM, R. and JUN, G.T. (2010) 'Prospective hazard analysis: Tailoring prospective methods to a healthcare context', Patient Safety Research Portfolio, Report
WILKINSON, C. and DIX, A. (2010) 'Considering prior experience and expectation in automotive safety system development' in 4th Irish Human Computer Interaction Conference (iHCI 2010), Dublin, Ireland,
WILKINSON, C., LANGDON, P.M. and CLARKSON, P.J. (2010) 'Prior experience and learning: Generational effects upon interaction' in Designing inclusive interactions, 145-154
WILKINSON, C., LANGDON, P.M. and CLARKSON, P.J. (2010) 'Observing learning and conceptual development through novel product interaction' in 24th British Computer Society Human Computer Interaction Workshop and Conference (HCI 2010), Dundee, Scotland,
WYATT, D.F., WYNN, D.C. and CLARKSON, P.J. (2010) 'Characterising the impact of legacy architectures on complex products' in 11th International Design Conference (DESIGN 2010), Dubrovnik, Croatia,
WYNN, D.C., CALDWELL, N.H.M. and CLARKSON, P.J. (2010) 'Can change prediction help prioritise redesign work in future engineering systems?' in 11th International Design Conference (DESIGN 2010), Dubrovnik, Croatia,
WYNN, D.C., KREIMEYER, M., EBEN, K., MAURER, M., LINDEMANN, U. and CLARKSON, P.J. (2010) 'Foreword' in Managing Complexity by Modelling Dependencies: Proceedings of the 12th International Dependency and Structure Modelling Conference
WYNN, D.C., KREIMEYER, M., EBEN, K., MAURER, M., LINDEMANN, U. and CLARKSON, P.J. (2010) 'Managing Complexity by Modelling Dependencies: Proceedings of the 12th International Dependency and Structure Modelling Conference', Hanser Verlag, Cambridge, UK
WYNN, D.C., MAIER, A.M. and CLARKSON, P.J. (2010) 'How can PD process modelling be made more useful? An exploration of factors which influence modelling utility' in 11th International Design Conference (DESIGN 2010), Dubrovnik, Croatia,
WYNN, D.C., WYATT, D.F., NAIR, S.M.T. and CLARKSON, P.J. (2010) 'An introduction to the Cambridge Advanced Modeller' in 1st International Conference on Modelling and Management of Engineering Processes (MMEP 2010), Department of Engineering, University of Cambridge, Cambridge, UK,
ZHANG, H., CUI, P. and WANG, H. (2010) 'An effective interaction control mechanism with minor step for multidisciplinary collaborative simulation system' in 14th International Conference on Computer Supported Cooperative Work in Design (CSCWD 2010), Shanghai, China,
ZHANG, H., WANG, H., CHEN, D. and ZACHAREWICZ, G. (2010) 'A model-driven approach to multidisciplinary collaborative simulation for virtual product development' in Journal of Advanced Engineering Informatics, 24 (2), 167-179

2009

AHMAD, N., WYNN, D.C. and CLARKSON, P.J. (2009) 'Estimating the process cost of implementing engineering change alternatives' in 2nd Nordic Conference on Product Lifecycle Management (NordPLM '09), Goteborg, Sweden,
AHMAD, N., WYNN, D.C. and CLARKSON, P.J. (2009) 'An MDM-based approach to manage engineering change processes across domains of the design process' in 11th International Design Structure Matrix Conference (DSM'09), Greenville, South Carolina, USA,
ALAVERDYAN, Y., HEMPE, E-M., VAMIVAKAS, A.N., HAIBO, E., MAIER, S.A. and ATATURE, M. (2009) 'Spectral and angular distribution of Rayleigh scattering from plasmon-coupled nanohole chains' in Applied Physics Letters, 94 (2)
ALBERS, A., BRAUN, A., CLARKSON, P.J., ENKLER, H-G. and WYNN, D.C. (2009) 'Contact and channel modelling to support the early design of technical systems' in 17th International Conference on Engineering Design (ICED'09), Stanford, CA, USA, 5, 61-72
ARIYO, O.O., ECKERT, C.M. and CLARKSON, P.J. (2009) 'Challenges in identifying the knock-on effects of engineering change' in International Journal of Design Engineering, 2 (4), 414-431
AURISICCHIO, M. and BRACEWELL, R.H. (2009) 'Engineering design by integrated diagrams' in 17th International Conference on Engineering Design (ICED'09), Stanford, CA, USA, 6, 301-312
BLACKWELL, A.D., ECKERT, C.M., BUCCIARELLI, L. and EARL, C.F. (2009) 'Witnesses to design: a phenomenology of comparative design' in Design Issues, 25 (1)
BLESSING, L.T.M. and CHAKRABARTI, A. (2009) 'DRM: a design research methodology', Springer Verlag
BRACEWELL, R.H., GOURTOVAIA, M., MOSS, M., KNOTT, D., WALLACE, K.M. and CLARKSON, P.J. (2009) 'Dred 2.0: A method and tool for capture and communication of design knowledge deliberated in the creation of technical products' in 17th International Conference on Engineering Design (ICED'09), Stanford, CA, USA, 6, 223-234
CALDWELL, N.H.M., MARTIN, G.C., MITCHELL, A.L., HOLBURN, D.M. and BRETON, B.C. (2009) 'Virtual SEM (VSEM) - Ongoing development of teaching resources' in Microscopy and Microanalysis, 15 (Supplement S2), 1144-1145
CALDWELL, N.H.M., MCMAHON, C.A., DARLINGTON, M.J., HEISIG, P., HOLBURN, D.M. and CLARKSON, P.J. (2009) 'Applying engineering information management principles to microscopy' in Microscopy and Microanalysis, 15 (Supplement S2), 806-807
CHALUPNIK, M.J., WYNN, D.C. and CLARKSON, P.J. (2009) 'Approaches to mitigate the impact of uncertainty in development processes' in 17th International Conference on Engineering Design (ICED'09), Stanford, CA, USA, 1, 459-470
CLARKSON, P.J. (2009) 'Designing a more inclusive world' in Inclusive Buildings, Products & Services: Challenges in Universal Design, 130-155
CLARKSON, P.J. (2009) 'Ergonomics for engineers' in Contemporary Ergonomics 2009, London, 483-490
CLEETON, J.P.E., KAVANAGH, R.M. and PARKS, G.T. (2009) 'Blade cooling optimisation in humid-air and steam-injected gas turbines' in Applied Thermal Engineering, 29 (16), 3274-3283
CRILLY, N. (2009) 'Reading across boundaries: interdisciplinary scholarship in art and design research' in Interrogations: Creative Interdisciplinarity in Art and Design Research, Loughborough, UK, 3-12
CRILLY, N., MOULTRIE, J. and CLARKSON, P.J. (2009) 'Shaping things: intended consumer response and the other determinants of product form' in Design Studies, 30 (3), 224-254
DE LESSIO, M.P., KOH, E.C.Y., WYNN, D.C. and CLARKSON, P.J. (2009) 'Communicating planning change activity using a matrix-based approach' in 11th International Design Structure Matrix Conference (DSM'09), Greenville, South Carolina, USA,
DE LESSIO, M.P., WYNN, D.C. and CLARKSON, P.J. (2009) 'Communication and design process planning: initial insights from literature and industry interviews' in 17th International Conference on Engineering Design (ICED'09), Stanford, CA, USA, 1, 583-594
DODSON, M. and PARKS, G.T. (2009) 'Robust Aerodynamic Design Optimization Using Polynominal Chaos' in Journal of Aircraft, 46 (2), 635-646
EASTWOOD, J.P. (2009) 'Robust wing design with integrated shock control', Cambridge University Engineering Department, First Year Report
ECKERT, C.M., DE WECK, O., KELLER, R. and CLARKSON, P.J. (2009) 'Engineering change: drivers, sources and approaches in industry' in 17th International Conference on Engineering Design (ICED'09), Stanford, California, USA, 4, 47-58
ECKERT, C.M., KELLER, R. and CLARKSON, P.J. (2009) 'Complexity in engineering design' in Embracing complexity in design, 37-61
ECKERT, C.M., WYATT, D.F. and CLARKSON, P.J. (2009) 'The elusive act of synthesis: creativity in conceptual design of complex engineering products' in ACM Creativity and Cognition 2009, Berkeley, California, USA,
ENG, N.L., BRACEWELL, R.H. and CLARKSON, P.J. (2009) 'Concept diagramming software for engineering design support: a review and synthesis of studies' in ASME 2009 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2009), San Diego, California, USA, 8, 1221-1234
FELEKOGLU, B., MAIER, A.M. and MOULTRIE, J. (2009) 'Can objects provide a means to support effective management of new product development? - An exploratory study' in 16th International Product Development Management Conference (IPDM), Twente, Netherlands,
GHISU, T. (2009) 'Robust aerodynamic design optimisation of compression systems', PhD-thesis, Cambridge University Engineering Department
GIFFIN, M.L., DE WECK, O.L., BUONOVA, G., KELLER, R., ECKERT, C.M. and CLARKSON, P.J. (2009) 'Change propagation analysis in complex technical systems' in Journal of Mechanical Design, 131 (8), 081001-1 - 081001-14
GOODMAN-DEANE, J., LANGDON, P.M., CLARKSON, P.J. and CLARKE, S. (2009) 'Eliciting mental models of user methods for product and communications design' in Universal Access in Human-Computer Interaction: Addressing Diversity. 5th International Conference on Universal Access in Human-Computer Interaction, UAHCI 2009, San Diego, CA, USA, 5614, 559-567
GREBICI, K., WYNN, D.C. and CLARKSON, P.J. (2009) 'Describing information use in engineering design processes using a diagrammatic model' in 17th International Conference on Engineering Design (ICED'09), Stanford, CA, USA, 1, 571-582
HEISIG, P. (2009) 'Harmonisation of knowledge management - comparing 160 KM frameworks around the globe' in Journal of Knowledge Management, 13 (4), 4-31
HEISIG, P., CLARKSON, P.J., HEMPHL, J., WADELL, C., BERGENDAHL, M.N., ROELOFSEN, J., KREIMEYER, M. and LINDEMANN, U. (2009) 'Challenges and future fields of research for modelling and management of engineering processes', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR148
HINRICHS, S. (2009) 'A systems approach to improving patient safety through medical device purchasing', PhD-thesis, Cambridge University Engineering Department
HURTIENNE, J. and LANGDON, P.M. (2009) 'Prior knowledge in inclusive design: The older, the more intuitive?' in 23rd British Computer Society Human Computer Interaction Workshop and Conference (HCI 2009), Cambridge, UK,
HURTIENNE, J., LANGDON, P.M. and CLARKSON, P.J. (2009) 'Towards an account of sensorimotor knowledge in inclusive product design' in 5th International Conference on Universal Access in Human-Computer Interaction (Part I), San Diego, California, USA, 5614, 251-260
JAFRI, T. and CLARKSON, P.J. (2009) 'Designing better medicines delivery in the UK National Health Services (NHS)' in Australasian Medical Journal, 1 (11), 121-128
JAGTAP, S. (2009) 'Capture and structure of in-service information for engineering designers', PhD-Thesis, Cambridge University Engineering Department
JARRETT, J.P., GHISU, T. and PARKS, G.T. (2009) 'On the coupling of designer experience and modularity in the aerothermal design of turbomachinery' in Transactions - American Society of Mechanical Engineers Journal of Turbomachinery, 131 (3)
JOKISUU, E. (2009) 'Design implications of cognitive impairment', Cambridge University Engineering Department, First Year Report
JUN, G.T. and CLARKSON, P.J. (2009) 'Modelling and simulation techniques for supporting healthcare decision making: a selection framework (2nd ed)', University of Cambridge Engineering Design Centre
JUN, G.T. and CLARKSON, P.J. (2009) 'Information sources and methods for better quality and safer healthcare service design: towards a more integrated approach' in International Association of Society of Design Research (IASDR 2009), Seoul, Korea,
JUN, G.T., WARD, J.R., MORRIS, Z.S. and CLARKSON, P.J. (2009) 'Health care process modelling: which method when?' in International Journal for Quality in Health Care, 21 (3), 214-224
JUPP, J.R., DE WECK, O., KELLER, R. and CLARKSON, P.J. (2009) 'Dimensions of decision situations in complex product development' in 17th International Conference on Engineering Design (ICED'09), Stanford, California, USA, 3, 239-250
KAVANAGH, R.M. and PARKS, G.T. (2009) 'A systematic comparison and multi-objective optimization of humid power cycles - Part I: Thermodynamics' in Transactions - Journal of Engineering for Gas Turbines and Power, 131 (4)
KAVANAGH, R.M. and PARKS, G.T. (2009) 'A systematic comparison and multi-objective optimization of humid power cycles - Part II: Economics' in Transactions - Journal of Engineering for Gas Turbines and Power, 131 (4)
KERLEY, W.P., WYNN, D.C., MOSS, M.A., COVENTRY, G. and CLARKSON, P.J. (2009) 'Towards empirically-derived guidelines for process modelling interventions in engineering design' in 17th International Conference on Engineering Design (ICED'09), Stanford, CA, USA, 1, 217-228
KILPINEN, M.S. and CLARKSON, P.J. (2009) 'Exploiting change impact analysis to support sustainability' in 7th Annual Conference on Systems Engineering Research 2009 (CSER 2009), Loughborough, UK,
KILPINEN, M.S., ECKERT, C.M. and CLARKSON, P.J. (2009) 'Assessing impact analysis practice to improve change management capability' in International Conference on Engineering Design (ICED'09), Stanford, CA, USA, 1, 1-25
KOH, E.C.Y. and CLARKSON, P.J. (2009) 'A modelling method to manage change propagation' in International Conference on Engineering Design (ICED'09), Stanford, CA, USA, 1, 253-264
KOH, E.C.Y., CALDWELL, N.H.M. and CLARKSON, P.J. (2009) 'Using a matrix-based approach to model change propagation' in 11th International Design Structure Matrix Conference, DSM'09, Greenville, South Carolina, USA,
KOH, E.C.Y., KELLER, R., ECKERT, C.M. and CLARKSON, P.J. (2009) 'Change Propagation Modelling to Support the Selection of Solutions in Incremental Change' in International Conference on Research into Design (ICoRD '09), National Science Seminar Complex, Indian Institute of Science, Bangalore, India,
LANGDON, P.M. and HURTIENNE, J. (2009) 'Is prior experience the same as intuition in the context of inclusive design?' in 23rd British Computer Society Human Computer Interaction Workshop and Conference (HCI 2009), Cambridge, UK,
LIN, Y., SHEA, K., JOHNSON, A.L., COULTATE, J. and PEARS, J. (2009) 'A method and software tool for automated gearbox synthesis' in ASME 2009 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2009), San Diego, CA, USA, (Computational Design)
MAIER, A.M. (2009) 'The future of innovation: Orchestrating ideas through communication' in The Future of Innovation, 324-325
MAIER, A.M., ECKERT, C.M. and CLARKSON, P.J. (2009) 'Towards managing team interfaces: an exploratory elicitation of factors influencing communication' in 17th International Conference on Engineering Design (ICED'09), Stanford, CA, USA, 3, 275-286
MAIER, A.M., KREIMEYER, M., LINDEMANN, U. and CLARKSON, P.J. (2009) 'Reflecting Communication: a key factor for successful collaboration between embodiment design and simulation' in Journal of Engineering Design, 20 (3), 265-287
MAIER, A.M., MOULTRIE, J. and CLARKSON, P.J. (2009) 'Developing maturity grids for assessing organisational capabilities: practitioner guidance' in 4th International Conference on Management Consulting, Academy of Management (MCD'09), Vienna, Austria,
MAY, S. (2009) 'Engineering selection for inclusive design', Cambridge University Engineering Department, Fourth Year Report
MCMAHON, C.A., CALDWELL, N.H.M., DARLINGTON, M.J., CULLEY, S.J., GIESS, M.D. and CLARKSON, P.J. (2009) 'The development of a set of principles for through-life management of engineering information', University of Cambridge
MIECZAKOWSKI, A.K., LANGDON, P.M. and CLARKSON, P.J. (2009) 'Designers, users and a shared understanding of the product: A case study with product designers' in European Conference on Cognitive Ergonomics (ECCE 2009), Helsinki, Finland, 370-373
MIECZAKOWSKI, A.K., LANGDON, P.M. and CLARKSON, P.J. (2009) 'Modelling product-user interaction for inclusive design' in 5th International Conference on Universal Access in Human-Computer Interaction (Part I), San Diego, CA, USA, 559-567
MIECZAKOWSKI, A.K., LANGDON, P.M. and CLARKSON, P.J. (2009) 'Specifying an inclusive model of product-user interaction' in 17th International Conference on Engineering Design (ICED'09), Stanford, California, USA, 4, 143-154
MIECZAKOWSKI, A.K., LANGDON, P.M. and CLARKSON, P.J. (2009) 'Inclusive interaction and its application in real design situations' in 23rd British Computer Society Human Computer Interaction Workshop and Conference (HCI 2009), Cambridge, UK,
MORRIS, Z.S. (2009) 'Overcrowding in emergency departments: a literature review', Engineering Design Centre (published)
MORRIS, Z.S. and CLARKSON, P.J. (2009) 'Does social marketing provide a framework for changing healthcare practice?' in Health Policy, 91 (2), 135-141 (published)
SAEED, T., GRAHAM, W., BABINSKY, H., HALL, C., JARRETT, J.P. and SEFFEN, K. (2009) 'Conceptual design for a laminar flying wing aircraft' in 27th AIAA Applied Aerodynamics Conference, San Antonio, Texas, USA,
SANTHANAKRISHNAN, D., PARKS, G.T., JARRETT, J.P. and CLARKSON, P.J. (2009) 'An integrated evaluation system for the conceptual design of space systems' in 7th Annual Conference on Systems Engineering Research (CSER 2009), Loughborough, UK,
SEIDEL, D. (2009) 'Design for independent living countering dependency in old age', Cambridge University Engineering Department, First Year Report
SEIDEL, D., CRILLY, N., LANGDON, P.M., MATTHEWS, F.E., JAGGER, C., BRAYNE, C. and CLARKSON, P.J. (2009) 'Understanding patterns of capability loss among elderly users' in 17th International Conference on Engineering Design (ICED'09), Stanford, CA, USA, 8, 207-214
SEIDEL, D., CRILLY, N., MATTHEWS, F.E., JAGGER, C., BRAYNE, C. and CLARKSON, P.J. (2009) 'Patterns of functional loss among older people: A prospective analysis' in Human Factors, 51 (5), 669-680 (Healthcare design)
SUTCLIFFE, L.F.R., MAIER, A.M., MOULTRIE, J. and CLARKSON, P.J. (2009) 'Development of a framework for assessing sustainability in new product development' in 17th International Conference on Engineering Design (ICED'09), Stanford, CA, USA, 7, 289-300
SUTCLIFFE, L.F.R., MAIER, A.M., MOULTRIE, J. and CLARKSON, P.J. (2009) 'Towards a framework of sustainability capabilities in product development' in 16th International Product Development Management Conference (IPDM), Twente, Netherlands,
SYMONS, K.E. and SYMONS, D.D. (2009) 'Embodied energy and carbon - what structural engineers need to know' in The Structural Engineer, 87 (9), 19-23
WALLACE, K.M. (2009) 'Design for reliability in mechanical systems' in DRM: a design research methodology
WALLER, S.D. and CLARKSON, P.J. (2009) 'Tools for inclusive design' in The Universal Access Handbook
WALLER, S.D., GOODMAN-DEANE, J., LANGDON, P.M., JOHNSON, D. and CLARKSON, P.J. (2009) 'Developing a method for assessing product inclusivity' in 17th International Conference on Engineering Design (ICED'09), Stanford, CA, USA, 5, 335-346
WALLER, S.D., LANGDON, P.M. and CLARKSON, P.J. (2009) 'Visualizing design exclusion predicted by disability data: A mobile phone case study' in 5th International Conference on Universal Access in Human-Computer Interaction (Part I), San Diego, California, USA, 644-653
WANG, H., JOHNSON, A.L. and BRACEWELL, R.H. (2009) 'Supporting design rationale retrieval for design knowledge re-use' in 17th International Conference on Engineering Design (ICED'09), Stanford, CA, USA, 8, 335-346
WANG, H., JOHNSON, A.L. and ZHANG, H. (2009) 'The assembly of computational models for the collaborative development of virtual prototypes' in ASME 2009 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2009), San Diego, CA, USA,
WANG, H., JOHNSON, A.L., ZHANG, H. and LIANG, S. (2009) 'Towards a collaborative modeling and simulation platform on the Internet' in Journal of Advanced Engineering Informatics, 24 (2), 208-218
WANG, H., ZHANG, H. and JOHNSON, A.L. (2009) 'A service-oriented approach for the collaborative simulation of complex engineering systems' in IEEE Congress on Services (SERVICES 2009), Los Angeles, CA, USA,
WARD, J.R., WATKINSON, J., CLARKSON, P.J., BUCKLE, P., ANDERSON, J. and JEFFCOTT, S. (2009) 'Assessing the impact of drug packaging and labelling on patients' in Hospital Pharmacy Europe, (45), 68-69
WIECZORECK, C., CRILLY, N., DIXON, J. and HOELSHER, U. (2009) 'Design-phase-specific selection of user research methods' in World Congress on Medical Physics and Biomedical Engineering, Munich, Germany, 864-867
WILD, P.J., CLARKSON, P.J. and McFARLANE, D.C. (2009) 'A framework for cross disciplinary efforts in services research' in Proceedings of the 19th CIRP Design Conference Ä Competitive Design, Cranfield, UK,
WILKINSON, C., LANGDON, P.M. and CLARKSON, P.J. (2009) 'Investigating prior experience and product learning through novel interface interaction' in 5th International Conference on Universal Access in Human-Computer Interaction (Part I), San Diego, CA, USA, 654-664
WITTNER, B. (2009) 'A stakeholder focused study on the use and design of medical device alarms', PhD-thesis, University of Cambridge
WYATT, D.F., ECKERT, C.M. and CLARKSON, P.J. (2009) 'Design of product architectures in incrementally developed complex products' in International Conference on Engineering Design (ICED'09), Stanford, CA, USA, 4, 167-178
WYATT, D.F., WYNN, D.C. and CLARKSON, P.J. (2009) 'Comparing representations for product architecture design through life-cycle evaluation methods' in 2nd Nordic Conference on Product Lifecycle Management (NordPLM '09), Goteborg, Sweden,
WYATT, D.F., WYNN, D.C. and CLARKSON, P.J. (2009) 'Exploring spaces of system architectures using constraint-based classification and Euler diagrams' in 11th International Design Structure Matrix Conference (DSM'09), Greenville, South Carolina, USA,
WYATT, D.F., WYNN, D.C. and CLARKSON, P.J. (2009) 'A computational method to support product architecture design' in ASME International Mechanical Engineering Congress and Exposition IMECE'09, Lake Buena Vista, Florida, USA, 4, 195-208
WYNN, D.C. and CLARKSON, P.J. (2009) 'Design project planning, monitoring and re-planning through process simulation' in 17th International Conference on Engineering Design (ICED'09), Stanford, CA, USA, 1, 25-36
WYNN, D.C., NAIR, S.M.T. and CLARKSON, P.J. (2009) 'The P3 Platform: An approach and software system for developing diagrammatic model-based methods in design research' in 17th International Conference on Engineering Design (ICED'09), Stanford, CA, USA, 1, 559-570
ZHAO, L., DAWES, W.N., PARKS, G.T., JARRETT, J.P. and YANG, S. (2009) 'Robust airfoil design with respect to boundary layer transition' in 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 17th AIAA/ASME/AHS Adaptive Structures Conference, 11th AIAA Non-Deterministic Approaches Conference, Palm Springs, California, USA,

2008

AHMAD, N. (2008) 'Informing Process Planning Through Impact Analysis of Changes', Cambridge University Engineering Department, First Year Report
ANDERSON, J., COLLIGAN, L., BUCKLE, P., WARD, J.R. and CLARKSON, P.J. (2008) 'Proactive Risk Assessment in Healthcare: How do experts select the best methods?' in Healthcare Systems Ergonomics and Patient Safety (HEPS 2008), Strasbourg, France,
ANKRUM, J.A. (2008) 'A Study of User Interaction with Written Medicine Information', MPhil-thesis, Cambridge University Engineering Department
ARIYO, O.O., ECKERT, C.M. and CLARKSON, P.J. (2008) 'Hierarchical decompositions for complex product representations' in International Design Conference - Design 2008, Dubrovnik, Croatia,
ATKINSON, S.R. (2008) 'The Study and Instrumentation of Decision Taking in Dynamic Social Networks', Cambridge University Engineering Department, First Year Report
AURISICCHIO, M., GOURTOVAIA, M., BRACEWELL, R.H. and WALLACE, K.M. (2008) 'How to evaluate reading and interpretation of differently structured engineering design rationale' in Journal of Artificial Intelligence for Engineering Design, Analysis and Manufacturing (AIEDAM), 22 (4), 345-358
BELL, C.P., CLARKSON, P.J. and DAWES, W.N. (2008) 'Improving the turbine cooling conceptual design process' in ASME Turbo Expo 2008, Berlin, Germany, 6, 2631-2640
BELL, T.A. (2008) 'Flexibility or performance? Modularity and aero engine design', PhD, University of Cambridge
BELL, T.A., JARRETT, J.P. and CLARKSON, P.J. (2008) 'Exploring the effects of removing process-intrinsic constraints with an integrated approach to gas turbine design' in Journal of Propulsion and Power, 24 (4), 751-762
BLACKWELL, A.F., PHAAL, R., EPPLER, E. and CRILLY, N. (2008) 'Strategy roadmaps: new forms, new practices' in Diagrams 2008: Fifth International Conference on the Theory and Application of Diagrams, Herrsching, Germany, 127-140
BOERSTING, P., KELLER, R., ALINK, T., ECKERT, C.M., ALBERS, A. and CLARKSON, P.J. (2008) 'The relationship between functions and requirements for an improved detection of component linkages' in International Design Conference - Design 2008, Dubrovnic, Croatia,
BOLOGNINI, F. (2008) 'An Integrated Simulation-based Generative Design Method for Microelectromechanical Systems', PhD-thesis, University of Cambridge
CALDWELL, N.H.M., BUI, M.T., NARAN, J., HOLBURN, D.M. and BRETON, B.C. (2008) 'Do-it-yourself web-based diagnosis for the scanning electron microscope' in Microscopy and Microanalysis, Albuquerque, USA, 14,
CHALUPNIK, M.J., WYNN, D.C., ECKERT, C.M. and CLARKSON, P.J. (2008) 'Investigating design process performance under uncertainty' in 7th International Symposium on Tools and Methods of Competitive Engineering (TMCE 2008), Kusadasi, Turkey,
CHALUPNIK, M.J., WYNN, D.C., ECKERT, C.M. and CLARKSON, P.J. (2008) 'Analysing the relationship between design process composition and robustness to task delays' in International Design Conference - Design 2008, Dubrovnik, Croatia,
CLARKSON, P.J., GOODMAN-DEANE, J. and WALLER, S.D. (2008) 'One for all' in Engineer, 293 (7751), 42
CLARKSON, P.J., LANGDON, P.M., GOODMAN-DEANE, J. and ROBINSON, P. (2008) 'Proceedings, 4th Cambridge Workshop on Universal Access and Assistive Technology', Cambridge University Engineering Department CUED/C-EDC/TR145
COLEMAN, R., CLARKSON, P.J., DONG, H. and CASSIM, J. (2008) 'Design for inclusivity: A practical guide to accessible, innovative and user-centred design', Gower (239), ISBN-13: 9780566087073
CRILLY, N., GOOD, D., MATRAVERS, D. and CLARKSON, P.J. (2008) 'Design as communication: exploring the validity and utility of relating intention to interpretation' in Design Studies, 29 (5), 425-457
CRILLY, N., MAIER, A.M. and CLARKSON, P.J. (2008) 'Representing artefacts as media: modelling the relationship between designer intent and consumer experience' in International Journal of Design, 2 (3), 15-27
DAWSON, S. and MORRIS, Z.S. (2008) 'Future Public Health: Burdens, Challenges, and Opportunities', Palgrave Macmillan, Basingstoke
DE LESSIO, M. (2008) 'An Empirical Study of Planning Practice in Engineering Design', Cambridge University Engineering Department, First Year Report
ECKERT, C.M., KERLEY, W., CLARKSON, P.J. and MOSS, M. (2008) 'Design for service: The new challenge for long-life products' in 7th International Symposium on Tools and Methods of Competitive Engineering (TMCE 2008), Kusadasi, Turkey,
ECKERT, C.M., WYNN, D.C., CLARKSON, P.J. and BLACK, S. (2008) 'Process simulation to make personalisation economically viable' in 7th International Symposium on Tools and Methods of Competitive Engineering (TMCE 2008), Kusadasi, Turkey,
ECKERT, C.M., ZOLGHADRI, M., KELLER, R. and CLARKSON, P.J. (2008) 'Indirect connection in a supply chain: Visualisation and analysis' in 10th International Design Structure Matrix Conference (DSM'08), Stockholm, Sweden,
ENG, N.L., BRACEWELL, R. and CLARKSON, P.J. (2008) 'The Role of Narrative in Evolving Engineering Design Documentation' in International Design Conference - Design 2008, Dubrovnik, Croatia, 769 - 776
ENG, N.L., BRACEWELL, R.H. and CLARKSON, P.J. (2008) 'Studying the role of narrative across aerospace knowledge management systems' in 59th International Astronautical Congress 2008 (IAC 2008), Glasgow, Scotland, 13, 8253-8262
ENG, N.L., BRACEWELL, R.H., CLARKSON, P.J., GIESS, M.D., McMAHON, C.A., CONWAY, A.P. and IONICIOIU, W.J. (2008) 'Comparing and integrating methods of design activity documentation across synchronous and asynchronous modes of collaborative work' in NordDesign 2008, Tallinn, Estonia,
GHISU, T., PARKS, G.T., JARRETT, J.P. and CLARKSON, P.J. (2008) 'Robust design optimisation of gas turbine compression systems' in 12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Victoria, British Columbia, Canada,
GHISU, T., PARKS, G.T., JARRETT, J.P. and CLARKSON, P.J. (2008) 'Accelerating design optimisation via principal components analysis' in 12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Victoria, British Columbia, Canada,
GHISU, T., PARKS, G.T., JARRETT, J.P. and CLARKSON, P.J. (2008) 'Design Optimisation of Gas Turbine Compression Systems' in 4th AIAA Multidisciplinary Design Optimization Specialist Conference, Schaumburg, Illinois, USA,
GOODMAN-DEANE, J.A., CLARKSON, P.J., LANGDON, P.M. and WALLER, S.D. (2008) 'Tools for supporting inclusive design' in 22nd British Computer Society Human Computer Interaction Workshop and Conference (HCI 2008), Liverpool, UK,
GOODMAN-DEANE, J., KEITH, S. and WHITNEY, G. (2008) 'HCI and the older population' in HCI 2008, Liverpool, UK,
GOODMAN-DEANE, J., KEITH, S. and WHITNEY, G. (2008) 'HCI and the Older Population' in Universal Access in the Information Society, 8 (1) (in press)
GOODMAN-DEANE, J., LANGDON, P.M. and CLARKSON, P.J. (2008) 'Addressing capability loss in design: Designing for people who do not read easily' in HCI 2008, Liverpool, UK,
GOODMAN-DEANE, J., LANGDON, P.M., CLARKE, S. and CLARKSON, P.J. (2008) 'Categorising design methods: how designers view the roles of user methods in design' in Contemporary Ergonomics 2008, 273-278
GOODMAN-DEANE, J., LANGDON, P.M., CLARKE, S. and CLARKSON, P.J. (2008) 'User involvement and user data: a framework to help designers to select appropriate methods' in Designing inclusive futures, 23-34
GOODMAN-DEANE, J., WALLER, S.D. and CLARKSON, P.J. (2008) 'Simulating impairment' in (re)Actor3/HCI 2008, Liverpool, UK,
GOODMAN-DEANE, J., WALLER, S.D., CLARKSON, P.J. and LANGDON, P.M. (2008) 'An online toolkit for use in design for all education' in EDeAN, London, UK,
GREBICI, K., WYNN, D.C. and CLARKSON, P.J. (2008) 'Modelling the relationship between uncertainty levels in design descriptions and design process duration' in IDMME - Virtual Concept 2008, Beijing, China,
GUPTA, S.P. and LYONS, M.N. (2008) 'A practical approach to designing operating instructions for medical products in late or post-design phases' in Journal of Medical Engineering and Technology, (in press)
HINRICHS, S., DICKERSON, T. and CLARKSON, P.J. (2008) 'Systems perspective of improving patient safety through medical device procurement' in Dachkongress Patientensicherheit und Medizintechnik, Muenster, Germany,
HUTABARAT, W., PARKS, G.T., JARRETT, J.P., DAWES, W.N. and CLARKSON, P.J. (2008) 'Aerodynamic Topology Optimisation Using an Implicit Representation and a Multiobjective Genetic Algorithm' in Artificial Evolution, 4926, 148-159
JAEGGI, D.M., PARKS, G.T., DAWES, W.N. and CLARKSON, P.J. (2008) 'Robust multi-fidelity aerodynamic design optimization using surrogate models' in 12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Victoria, British Columbia, Canada, (accepted)
JAEGGI, D.M., PARKS, G.T., KIPOUROS, T. and CLARKSON, P.J. (2008) 'The development of a multi-objective tabu search algorithm for continuous optimisation problems' in European Journal of Operational Research, 185 (3), 1192-1212 (published)
JAFRI, T., LYONS, M.N. and CLARKSON, P.J. (2008) 'The supply of medicines in the NHS' in Improving Patient Safety (IPS 2008), Cambridge, UK,
JAGTAP, S., JOHNSON, A.L., AURISICCHIO, M. and WALLACE, K.M. (2008) ''Causality' in In-Service Information and Design Actions' in 7th International Symposium on Tools and Methods of Competitive Engineering (TMCE 2008), Kusadasi, Turkey, 2,
JARRETT, J.P. (2008) 'A Study on Changing Requirements Part Way Through an Aerodynamic Design Process' in 12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Victoria, British Columbia, Canada,
JARRETT, J.P., GHISU, T. and PARKS, G.T. (2008) 'On the coupling of designer experience and modularity in the aerothermal design of turbomachinery' in ASME Turbo Expo 2008, Berlin, Germany,
JOHNSON, A.L. (2008) 'Do Reciprocal Vertical Angles have a role in Geomatics?' in Survey Review, 40 (309), 293-295 (Knowledge Management)
JOHNSON, D. and HUPPERT, F. (2008) 'Older people, ICT and well-being', UK Government Mental Capital and Well-being Foresight Project, Department for Innovation, Universities and Skills
JUN, G.T., WARD, J.R. and CLARKSON, P.J. (2008) 'Process modelling approaches for healthcare hazard analysis' in Improving Patient Safety (IPS 2008), Cambridge, UK,
JUPP, J.R., WILD, P., ECKERT, C.M. and CLARKSON, P.J. (2008) 'The role of life cycle assessment in product-service design decision making' in International Conference on Life Cycle Engineering, The University of New Sales Wales, Sydney, Australia, (accepted)
KELLER, R. and CLARKSON, P.J. (2008) 'Incremental Knowledge Update for Through-Life Change Models using Bayesian Methods' in Realising Network Enabled Capability, Leeds, UK,
KELLER, R., ATKINSON, S.R. and CLARKSON, P.J. (2008) 'Network Enabled Capability as a Challenge for Design: A Change Management View' in International Design Conference - Design 2008, Dubrovnik, Croatia,
KELLER, R., CARRIGAN, N., ATKINSON, S.R., CLARKSON, P.J. and JOHNSON, P. (2008) 'Collaboration and Information Sharing in NEC Networks' in Realising Network Enabled Capability, Leeds, UK,
KELLER, R., ECKERT, C.M. and CLARKSON, P.J. (2008) 'Determining component freeze order: a redesign cost perspective using simulated annealing' in ASME International Design Engineering Technical Conferences (IDETC) and Computers and Information in Engineering Conference (CIE), New York, USA, 333-342
KELLER, R., ECKERT, C.M. and CLARKSON, P.J. (2008) 'Using an engineering change methodology to support conceptual design' in Journal of Engineering Design, 20 (6), 571-587
KELLER, R., ECKERT, C.M. and CLARKSON, P.J. (2008) 'Through-Life Change Prediction and Management' in International Conference on Product Lifecycle Management, Seoul, Korea,
KERLEY, W.P., WILD, P.J., ECKERT, C.M. and CLARKSON, P.J. (2008) 'IPAS: Recommendations on the development and use of process models for design process visualisation and improvement'
KERLEY, W.P., WYNN, D.C., MOSS, M.A., ECKERT, C.M. and CLARKSON, P.J. (2008) 'Using simulation to support integration of life-cycle engineering activities into an existing design process: A case study' in International Design Conference - Design 2008, Dubrovnik, Croatia,
KILPINEN, M.S. (2008) 'The Emergence of Change at the Systems Engineering and Software Design Interface: An Investigation of Impact Analysis', PhD-thesis, Cambridge University Engineering Department
KIM, S., AURISICCHIO, M. and WALLACE, K.M. (2008) 'Towards automatic causality boundary identification from root cause analysis reports' in Journal of Intelligent Manufacturing, 0956-5515
KIM, S., BRACEWELL, R. and WALLACE, K. (2008) 'Some reflections on ontologies in engineering domain' in 7th International Symposium on Tools and Methods of Competitive Engineering (TMCE 2008), Izmir, Turkey, (published)
KIPOUROS, T., DUNSTAN, T.D., JENKINS, K.W. and CANT, R.S. (2008) 'Towards the development of a complete computational design system for complicated and advanced combustion applications' in SIAM 12th International Conference on Numerical Combustion, Monterey, California, USA,
KIPOUROS, T., GHISU, T., PARKS, G.T. and SAVILL, A.M. (2008) 'Using post-analyses of optimisation processes as an active computational design tool' in International Conference on Computational and Experimental Engineering and Sciences (ICCES'08), Honolulu, Hawaii, USA, 7, 151-157
KIPOUROS, T., JAEGGI, D.M., DAWES, W.N., PARKS, G.T., SAVILL, A.M. and CLARKSON, P.J. (2008) 'Insight into high-quality aerodynamic design spaces through multi-objective optimization' in Computer Modeling in Engineering and Sciences (CMES), 37 (1), 1-44
KIPOUROS, T., JAEGGI, D.M., DAWES, W.N., PARKS, G.T., SAVILL, A.M. and CLARKSON, P.J. (2008) 'Biobjective design optimization for axial compressors using tabu search' in AIAA Journal, 46 (3), 701-711
KIPOUROS, T., JENKINS, K.W. and SAVILL, A.M. (2008) 'Development of computational tools for the engineering design optimisation of microcombustors' in 5th ECCOMAS, Venice, Italy,
KIPOUROS, T., MLECZKO, M. and SAVILL, A.M. (2008) 'Use of parallel-coordinates for post-analyses of multi-objective aerodynamic optimisation in turbomachinery' in 4th AIAA Multi-Disciplinary Design Optimization Specialist Conference, Schaumburg, Illinois, USA,
KOH, E.C.Y. (2008) 'Selection of design features and design strategies in incremental change', First Year Report
KOH, E.C.Y., KELLER, R., ECKERT, C.M. and CLARKSON, P.J. (2008) 'Influence of feature change propagation on product attributes in concept selection' in International Design Conference - Design 2008, Dubrovnik, Croatia,
KOH, E.C.Y., KELLER, R., ECKERT, C.M. and CLARKSON, P.J. (2008) 'Assessing design strategies from a change propagation perspective' in 10th International Design Structure Matrix Conference (DSM'08), Stockholm, Sweden,
LANGDON, P.M., CLARKSON, P.J. and ROBINSON, P. (2008) 'Designing inclusive futures', Springer Verlag
LANGDON, P.M., LEWIS, T. and CLARKSON, P.J. (2008) 'Measuring Prior Experience in Learned Product Interactions' in Proceedings of the International Conference on Contemporary Ergonomics (Ce2008), Nottingham, UK, 279-284
LANGDON, P.M., PERSAD, U. and CLARKSON, P.J. (2008) 'Operationalising Analytical Inclusive Design Evaluation' in Proceedings of the International Conference on Contemporary Ergonomics (Ce2008), Nottingham, UK, 279-284
LEWIS, T., LANGDON, P.M. and CLARKSON, P.J. (2008) 'Prior experience of domestic microwave cooker interfaces: a user study' in Designing inclusive futures, 95-106
LYONS, M.N. (2008) 'Are the Classical origins of medical language harming today's patients?' in The Lancet, 371 (9621), 1321-1322
LYONS, M.N. (2008) 'Using data from simulation training in modelling emergency response outcome.' in System Safety, NEC, Birmingham, UK, (accepted)
LYONS, M.N. (2008) 'HRA in healthcare - where next?' in Contemporary Ergonomics 2008, , 369-374
LYONS, M.N. (2008) 'Towards a framework to select techniques for error prediction: Supporting novice users in the healthcare sector Applied Ergonomics' in Applied Ergonomics 2008, (in press)
LYONS, M.N. and WITTNER, B. (2008) 'Book Review: Jack M Winters and Molly Follette Story (eds) Medical Instrumentation: Accessibility and Usability Considerations' in Ergonomics, (in press)
MAIER, A.M., ECKERT, C.M. and CLARKSON, P.J. (2008) 'Development of an audit tool for communication in product development: The communication grid method' in Academy of Management Meeting, Anaheim, California, USA,
MAIER, A.M., ECKERT, C.M. and CLARKSON, P.J. (2008) 'Assessing Communication: An Enabling Technology for More Effective R&D Management' in R&D Management Conference, Ottawa, Canada,
MAIER, A.M., KREIMEYER, M., HEPPERLE, C., ECKERT, C.M., LINDEMANN, U. and CLARKSON, P.J. (2008) 'Exploration of correlations between factors influencing communication in complex product development' in Concurrent Engineering: Research and Applications, 16 (March (1)), 37-59
MAIER, A.M., MOULTRIE, J. and CLARKSON, P.J. (2008) 'A review of maturity grid based approaches to assessing organizational capabilities' in Academy of Management Meeting, Anaheim, California, USA,
MEDEIROS, A.C.B., CRILLY, N. and CLARKSON, P.J. (2008) 'The influence of ageing on product experience' in 6th Design and Emotion Conference, Hong Kong, Hong Kong,
MEDEIROS, A.C.B., CRILLY, N. and CLARKSON, P.J. (2008) 'Affective response to ICT products in old age' in 22nd British Computer Society Human Computer Interaction Workshop and Conference (HCI 2008), Liverpool, UK,
MEDEIROS, A.C.B., CRILLY, N. and CLARKSON, P.J. (2008) 'The influence of ageing on the experience of information and communication technology' in 22nd British Computer Society Human Computer Interaction Workshop and Conference (HCI 2008), Liverpool, UK,
MIECZAKOWSKI, A.K. (2008) 'Design of Inclusive Products: Modelling Interaction Between Product Features and Human Capabilities', Cambridge University Engineering Department, First Year Report
MORRIS, Z.S. (2008) 'Review of Exemplar Experience under the Early Phases of RIGHT', Engineering Design Centre
MORRIS, Z.S. and DAWSON, S. (2008) 'Embedding Public Health Policy in the Social Context: Sexual Behaviour and Perceptions of Risk' in The Future of Health: Burdens, Challenges, and Opportunities
MORRIS, Z.S. and GANNON, M. (2008) 'Drug Misuse Treatment Services in Scotland: Predicting Outcomes' in International Journal for Quality in Health Care, 20 (4), 271-276 (published)
NERY, D., LANGDON, P.M. and CLARKSON, P.J. (2008) 'A Framework for Estimating Exclusion from Work Tasks During Inclusive Design' in Contemporary Ergonomics and Human Factors 2010, , 223-231
NERY, D., LANGDON, P.M. and CLARKSON, P.J. (2008) 'A Framework for estimating exclusion from work tasks during inclusive design' in Proceedings of the International Conference on Contemporary Ergonomics (Ce2008), Nottingham, UK, 267-272
NEWELL, A., GOODMAN-DEANE, J. and MORGAN, M. (2008) 'Relative confusion' in EDeAN, London, UK,
ROHDE, D., PAVKOVIC, N. and AURISICCHIO, M. (2008) 'Design Knowledge Indexing in Relational Database' in International Design Conference - Design 2008, Dubrovnik, Croatia, 857-864
SANTHANAKRISHNAN, D. (2008) 'Interdisciplinary Approaches for the Conceptual Design of Satellite Systems', Cambridge University Engineering Department, First Year Report
SCHNEIDER, C.G. (2008) 'Use, Storage and Disposal of Medicines at Home: A User Centred Approach to the Design of Medicines Packaging', Cambridge University Engineering Department, First Year Report
SKINNER, B. (2008) 'Multi-objective evolutionary optimisation of submarine propulsion design', PhD-thesis, University of Cambridge (submitted)
SKINNER, B., PARKS, G.T. and PALMER, P.R. (2008) 'Comparison of submarine drive topologies using multi-objective genetic algorithms' in IEEE Transactions on Vehicular Technology, 57 (3) (submitted)
STEVENS, J., MOULTRIE, J. and CRILLY, N. (2008) 'Design dis-integration: silent, partial and disparate design' in Undisciplined! Design Research Society Conference, Sheffield, UK,
STEVENS, J., MOULTRIE, J. and CRILLY, N. (2008) 'How is design strategic? Clarifying the concept of strategic design' in Design Principles & Practices: An International Journal, 2 (3), 51-59
STEVENS, J., MOULTRIE, J. and CRILLY, N. (2008) 'Designing and design thinking in strategy concepts: frameworks towards an intervention tool' in International Design Management Institute Education Conference: design thinking Ä new challenges for designers managers and organisations, Cergy-Pontoise, Paris, France,
SYMONS, D.D. and FLECK, N.A. (2008) 'The imperfection sensitivity of isotropic two-dimensional elastic lattices' in Journal of Applied Mechanics, 75
TICEHURST, A. (2008) 'A study to identify how different design approaches support service delivery planning within the NHS', Cambridge University Engineering Department, First Year Report
WALLER, S.D. (2008) 'Optimisation of hierarchical and branched compression structures', VDM Verlag, 978-3639070064
WALLER, S.D., LANGDON, P.M. and CLARKSON, P.J. (2008) 'Converting disability data into a format suitable for estimating design exclusion' in Designing inclusive futures, 3-14
WALLER, S.D., LANGDON, P.M., CARDOSO, C. and CLARKSON, P.J. (2008) 'Calibrating capability loss simulators to population data' in International Conference on Contemporary Ergonomics (Ce2008), Nottingham, UK, 279-284
WANG, H. (2008) 'Supporting Design Knowledge Reuse by Managing Design Rationale', Cambridge University Engineering Department, First Year Report
WYATT, D.F. (2008) 'Understanding artefact architecture design', First Year Report
WYATT, D.F., WYNN, D.C. and CLARKSON, P.J. (2008) 'Synthesis of product architectures using a DSM/DMM-based approach' in 10th International Design Structure Matrix Conference (DSM'08), Stockholm, Sweden,
WYNN, D.C. and CLARKSON, P.J. (2008) 'Linkage meta-modelling to support the development of design process improvement tools' in 7th International Symposium on Tools and Methods of Competitive Engineering (TMCE 2008), Kusadasi, Turkey,
ZHANG, H., WANG, H. and CHEN, D. (2008) 'Integrating web services technology to HLA-based multidisciplinary collaborative simulation system for complex product development' in 12th International Conference on Computer Supported Cooperative Work in Design, Xi'an, China, 420-426

2007

ACHICHE, S., FAN, Z. and BOLOGNINI, F. (2007) 'Review of automated design and optimization of MEMS' in 2007 IEEE International Symposium on Industrial Electronics, Vigo, Spain, (1-4244-0755-9)
AHMED, S. and AURISICCHIO, M. (2007) 'Understanding engineering design activity through questioning' in Connected International Conference on Design Education (ConnectED 2007), Sydney, Australia,
AHMED, S., KIM, S. and WALLACE, K.M. (2007) 'A methodology for creating ontologies for engineering design' in Journal of Computing and Information Science in Engineering, 7 (2), 132-140
ANDERSON, J., BUCKLE, P., WARD, J.R., LYONS, M.N., CLARKSON, P.J. and BARCLAY, S. (2007) 'Using HFMEA in primary care' in Patient Safety Research: Shaping the European Agenda, Porto, Portugal,
ARIYO, O.O. (2007) 'Change propagation in complex design: predicting detailed change cases with multi-levelled product models', PhD-thesis, Cambridge University Engineering Department
ARIYO, O.O., ECKERT, C.M. and CLARKSON, P.J. (2007) 'Prioritising engineering change propagation risk estimates' in 16th International Conference on Engineering Design (ICED'07), Paris, France, 691-692
ARIYO, O.O., KELLER, R., ECKERT, C.M. and CLARKSON, P.J. (2007) 'Predicting change propagation on different levels of granularity: an algorithmic view' in 16th International Conference on Engineering Design (ICED'07), Paris, France, 655-656
ASHBY, M.F., SHERCLIFF, H.R. and CEBON, D. (2007) 'Materials: engineering, science, processing and design', Butterworth-Heinemann, 0-7506-8391-0
AURISICCHIO, M., AHMED, S. and WALLACE, K.M. (2007) 'Improving design understanding by analysing questions' in ASME 2007 International Design Engineering Technical Conferences (IDETC/CIE2007), Las Vegas, Nevada, USA,
AURISICCHIO, M. and WALLACE, K.M. (2007) 'Competencies required to undertake empirical engineering design research in industry' in Journal of Design Research, 6 (3), 381-399
AURISICCHIO, M., BRACEWELL, R.H. and WALLACE, K.M. (2007) 'Characterising design questions that involve reasoning' in 16th International Conference on Engineering Design (ICED'07), France, Paris,
AURISICCHIO, M., GOURTOVAIA, M., BRACEWELL, R.H. and WALLACE, K.M. (2007) 'Evaluation of how DRed design rationale is interpreted' in 16th International Conference on Engineering Design (ICED'07), Paris, France, 63-64
BALDOCK, R. (2007) 'Structural optimisation in building design practice: case-studies in topology optimisation of bracing systems', PhD-thesis, Cambridge University Engineering Department
BELL, C.P., WYNN, D.C., DAWES, W.N. and CLARKSON, P.J. (2007) 'Using meta-data to enhance process simulation and identify improvements' in 16th International Conference on Engineering Design (ICED'07), Paris, France, 447-448
BICHARD, J-A., COLEMAN, R. and LANGDON, P.M. (2007) 'Does my stigma look big in this? Considering acceptability and desirability in the inclusive design of technology products' in Universal Access in Human-Computer Interaction: Coping with Diversity, 4th International Conference on Universal Access in Human-Computer Interaction, UAHCI 2007, Beijing, China, 4554, 622-631
BOLOGNINI, F., SESHIA, A.A. and SHEA, K. (2007) 'Exploring the application of a multi-domain simulation-based computational synthesis method in MEMS design' in 16th International Conference on Engineering Design (ICED'07), Paris, France, 81-82
BOLOGNINI, F., SESHIA, A.A. and SHEA, K. (2007) 'A computational design method for MEMS using COMSOL' in European COMSOL Conference 2007, Grenoble, France,
BRACEWELL, R.H., GOURTOVAIA, M., WALLACE, K.M. and CLARKSON, P.J. (2007) 'Extending design rationale to capture an integrated design information space' in 16th International Conference on Engineering Design (ICED'07), France, Paris, 85-86
BUCKLE, P., ANDERSON, J., WARD, J., JEFFCOTT, S., SNADDEN, C., GLEESON, A., LIM, R. and WADSWORTH, P. (2007) 'Patient safety: an ergonomics study of innovative design in pharmaceutical packaging' in International Conference on Contemporary Ergonomics (CE2007), Nottingham, 457-462
CARDOSO, C. and CLARKSON, P.J. (2007) 'User Simulation in Product Evaluation. Chapter 13' in Design for inclusivity: A practical guide to accessible, innovative and user-centred design, 196-210
CARDOSO, C., CLARKSON, P.J., LANGDON, P.M., PERSAD, U. and WALLER, S. (2007) 'User Capabilities. Part 4' in Inclusive Design Toolkit
CASSIM, J. and DONG, H. (2007) 'Empowering designers, empowering users: case studies from the DBA inclusive design challenge' in Design for inclusivity, (to appear)
CASSIM, J., COLEMAN, R., CLARKSON, P.J. and DONG, H. (2007) 'Why Inclusive Design? Chapter 2' in Design for inclusivity: A practical guide to accessible, innovative and user-centred design, 11-21
CASSIM, J., COLEMAN, R., CLARKSON, P.J. and DONG, H. (2007) 'Towards Inclusion: Future Challenges. Chapter 15' in Design for inclusivity: A practical guide to accessible, innovative and user-centred design, 229-239
CASSIM, J., COLEMAN, R., CLARKSON, P.J. and DONG, H. (2007) 'Introduction. Chapter 1' in Design for inclusivity: A practical guide to accessible, innovative and user-centred design, 1-9
CHALUPNIK, M.J., WYNN, D.C., ECKERT, C.M. and CLARKSON, P.J. (2007) 'Understanding design process robustness: a modelling approach' in 16th International Conference on Engineering Design (ICED'07), Paris, France, 455-456
CLARKE, S. (2007) 'A case for inclusive design', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR142
CLARKE, S. (2007) 'Including inclusive design', Certificate of Postgraduate Study, Cambridge University Engineering Department
CLARKSON, P.J. (2007) 'Countering Design Exclusion - Theory and Practice. Chapter 11' in Design for inclusivity: A practical guide to accessible, innovative and user-centred design, 165-180
CLARKSON, P.J. (2007) 'Human capability and product design' in Product experience, 165-198
CLARKSON, P.J., CARDOSO, C. and HOSKING, I. (2007) 'Product Evaluation: Practical Approaches. Chapter 12' in Design for inclusivity: A practical guide to accessible, innovative and user-centred design, 181-196
CLARKSON, P.J., COLEMAN, R., HOSKING, I. and WALLER, S. (2007) 'Inclusive design toolkit', Engineering Design Centre, University of Cambridge, UK
CLARKSON, P.J., GOODMAN, J., HOSKING, I., SINCLAIR, K. and WALLER, S. (2007) 'Knowledge and Tools. Part 3' in Inclusive Design Toolkit
COLEMAN, R., CLARKSON, P.J., GOODMAN, J., HOSKING, I., SINCLAIR, K. and WALLER, S. (2007) 'Introduction - what is inclusive design? Part 1' in Inclusive Design Toolkit
COLEMAN, R., CLARKSON, P.J., HOSKING, I., SINCLAIR, K., WALLER, S. and WHITE, M. (2007) 'Inclusive design process. Part 2' in Inclusive Design Toolkit
COLEMAN, R., TOPALIAN, A., CLARKSON, P.J. and DONG, H. (2007) 'The Business Case. Chapter 4' in Design for inclusivity: A practical guide to accessible, innovative and user-centred design, 33-55
COOK, R., MOLINA-CRISTOBAL, A., PARKS, G.T., OSORNIO CORREA, C. and CLARKSON, P.J. (2007) 'Multi-objective optimisation of a hybrid electric vehicle: drive train and driving strategy' in 4th International Conference on Evolutionary Multi-Criterion Optimization (EMO2007), Matsushima, Japan, 4403, 330-345
CRILLY, N. and CLARKSON, P.J. (2007) 'What the communicated-based models of design reveal and conceal' in Design Semiotics in Use - 6th Nordcode Seminar & Workshop, Helsinki, Finland, 130-143
CRILLY, N., BLACKWELL, A.F. and CLARKSON, P.J. (2007) 'Using diagrams in interviews' in Selected Readings of the 2nd Information Design International Conference, 2005, 144-152
DAWSON, P.J., PARKS, G.T., JAEGGI, D.M., MOLINA-CRISTOBAL, A. and CLARKSON, P.J. (2007) 'The development of a multi-threaded multi-objective tabu search algorithm' in 4th International Conference on Evolutionary Multi-Criterion Optimization (EMO2007), Matsushima, Japan, 4403, 242-256
DE WECK, O., ECKERT, C.M. and CLARKSON, P.J. (2007) 'A classification of uncertainty for early product and system design' in 16th International Conference on Engineering Design (ICED'07), Paris, France, 159-160
DODSON, M. (2007) 'Handling uncertainty in CFD with polynomial chaos', MPhil-thesis, Cambridge University Engineering Department
DONG, H., NICOLLE, C., BROWN, R. and CLARKSON, P.J. (2007) 'Understanding users: designer-oriented user research methods. Chapter 9' in Design for Inclusivity: A Practical Guide to Accessible, Innovative and User-centred Design, 131-147
DONG, H., PULLIN, G., NIELSEN, I., BENKTZON, M., BOBJER, O. and TANNER, B. (2007) 'Market value: inclusive design through practitioners' eyes' in Design for inclusivity, (to appear)
ECKERT, C.M., JOWERS, I. and CLARKSON, P.J. (2007) 'Knowledge requirements over long product lifecycles' in 16th International Conference on Engineering Design (ICED'07), Paris, France, 913-914
ECKERT, C.M., KELLER, R. and CLARKSON, P.J. (2007) 'Avoiding emergency innovation: change prediction in innovative products' in European Symposium on Innovative Management Practices (ERIMA'07), Biarritz, France, (CD-ROM)
EGER, T., ECKERT, C.M. and CLARKSON, P.J. (2007) 'Engineering change analysis during ongoing product development' in 16th International Conference on Engineering Design (ICED'07), Paris, France, 629-630
ENG, N.L. (2007) 'Applications of narrative for improving cognition across engineering design information spaces', Cambridge University Engineering Department, First Year Report
FLANAGAN, T., ECKERT, C.M. and CLARKSON, P.J. (2007) 'Externalising tacit overview knowledge: a model-based approach to supporting design teams' in Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 21 (3), 227-242
FLANAGAN, T., ECKERT, C.M. and CLARKSON, P.J. (2007) 'Project structure: an important factor in design project planning?' in 16th International Conference on Engineering Design (ICED'07), Paris, France, 627-628
GHISU, T., MOLINARI, M., PARKS, G.T., DAWES, W.N., JARRETT, J.P. and CLARKSON, P.J. (2007) 'Axial compressor intermediate duct design and optimisation' in 3rd AIAA Multidisciplinary Design Optimization Specialist Conference, Honolulu, Hawaii, USA, 2012-2025
GIFFIN, M.L., DE WECK, O.L., BUONOVA, G., KELLER, R., ECKERT, C.M. and CLARKSON, P.J. (2007) 'Change propagation analysis in complex technical systems' in ASME 2007 International Design Engineering Technical Conferences (IDETC/CIE2007), Las Vegas, Nevada, USA,
GOODMAN-DEANE, J., LANGDON, P.M., CLARKSON, P.J., CALDWELL, N.H.M. and SARHAN, A.M. (2007) 'Equipping designers by simulating the effects of visual and hearing impairments' in Proceedings, Assets 2007, Tempe, Arizona, USA,
GOODMAN, J., CASSIM, J. and LANGDON, P.M. (2007) 'Involving people with disabilities: lessons from a designer-centred inclusive design competition' in International Conference on Inclusive Design and Communications (INCLUDE 2007), The Royal College of Art, London, UK,
GOODMAN, J., CLARKE, S., LANGDON, P.M. and CLARKSON, P.J. (2007) 'DesignersÄô perceptions of methods of involving and understanding users' in Universal Access in Human-Computer Interaction: Coping with Diversity, 4th International Conference on Universal Access in Human-Computer Interaction, UAHCI 2007, Beijing, China, 4554, 127-136
GOODMAN, J., LANGDON, P.M. and CLARKSON, P.J. (2007) 'Formats for user data in inclusive design' in Universal Access in Human-Computer Interaction: Coping with Diversity, 4th International Conference on Universal Access in Human-Computer Interaction, UAHCI 2007, Beijing, China, 4554,
GOODMAN, J., LANGDON, P.M., CLARKSON, P.J. and CASSIM, J. (2007) 'Engaging the public in inclusive design' in International Conference on Inclusive Design and Communications (INCLUDE 2007), London, UK,
GOODMAN, J., LANGDON, P.M., CLARKSON, P.J. and DONG, H. (2007) 'Industry response to inclusive design: a survey' in 16th International Conference on Engineering Design (ICED'07), Paris, France, 869-870
GUPTA, S.P. (2007) 'Design and delivery of medical devices for home-use: drivers and challenges', PhD-thesis, Cambridge University Engineering Department
HEMPE, E-M., KLAUI, M., KASAMA, T., BACKES, D., JUNGINGER, F., KRZYK, S., HEYDERMAN, L.J., DUNIN-BORKOWSKI, R. and RUDIGER, U. (2007) 'Domain walls, domain wall transformations and structural changes in permalloy nanowires when subjected to current pulses' in physica status solidi (a), 204 (12), 3922Ä3928
HEPPERLE, C., MAIER, A.M., KREIMEYER, M., LINDEMANN, U. and CLARKSON, P.J. (2007) 'Analyzing communication dependencies in product development using the design structure matrix' in 9th International Design Structure Matrix Conference (DSM'07), Munich, Germany,
HINRICHS, S., DICKERSON, T. and CLARKSON, P.J. (2007) 'Improving patient safety through procurement of medical devices: a systems approach' in Patient Safety Research - Shaping the European Agenda (Porto 2007), Porto, Portugal,
HUTABARAT, W., PARKS, G.T., JARRETT, J.P., DAWES, W.N. and CLARKSON, P.J. (2007) 'Aerodynamic Topology Optimisation Using an Implicit Representation and a Multiobjective Genetic Algorithm' in 8th International Conference on Artificial Evolution, Tours, France, 148-159
JAFRI, T., LYONS, M.N., WARD, J.R. and CLARKSON, P.J. (2007) 'A systems approach to medication error' in Patient Safety Research Shaping the European Agenda, Porto, Portugal, (in press)
JAGTAP, S., JOHNSON, A.L., AURISICCHIO, M. and WALLACE, K.M. (2007) 'In-service information required by engineering designers' in 16th International Conference on Engineering Design (ICED'07), Paris, France, 545-546
JAGTAP, S., JOHNSON, A.L., AURISICCHIO, M. and WALLACE, K.M. (2007) 'In-service information flows to designers' in 16th International Conference on Engineering Design (ICED'07), Paris, France, 539-540
JARRETT, J.P., DAWES, W.N. and CLARKSON, P.J. (2007) 'An approach to integrated multi-disciplinary turbomachinery design' in Transactions - American Society of Mechanical Engineers Journal of Turbomachinery, 129 (3), 488-494
JUN, G.T. (2007) 'Review of management/planning methods in healthcare', Research into Global Healthcare Tools (RIGHT) project, Technical Report
JUN, G.T. (2007) 'Design for patient safety: A systematic evaluation of process modelling approaches for healthcare system safety improvement', PhD-thesis, Cambridge University Engineering Department
JUN, G.T., WARD, J.R. and CLARKSON, P.J. (2007) 'An approach to process modelling for healthcare system safety improvement' in International Forum on Quality and Safety in Health Care, Barcelona, Spain,
JUPP, J.P., LANGDON, P.M. and GODSILL, S. (2007) 'Mobile computing in maintenance activities: A Äôsituational induced impairments and disabilitiesÄô perspective' in Universal Access in Human-Computer Interaction: Coping with Diversity, 4th International Conference on Universal Access in Human-Computer Interaction, UAHCI 2007, Beijing, China, 4554, 696-705
JUPP, J.R. and ECKERT, C.M. (2007) 'A unified framework for analysing decision-making in design: a multi-perspective approach' in Conference on Knowledge and Information Management, Loughborough University, UK,
KAVANAGH, R.M., PARKS, G.T. and OBANA, M. (2007) 'Multi-objective optimisation of the humid air turbine' in ASME Turbo Expo 2007: Power for Land, Sea, and Air (GT2007), Montreal, Canada, 3, 211-221
KELLER, R. (2007) 'Predicting change propagation: algorithms, representations, software tools', PhD-thesis, Cambridge University Engineering Department
KELLER, R., ALINK, T., PFEIFER, C., ECKERT, C.M., CLARKSON, P.J. and ALBERS, A. (2007) 'Product models in design: a combined use of two models to assess change risks' in 16th International Conference on Engineering Design (ICED'07), Paris, France, 673-674
KELLER, R., ECKERT, C.M. and CLARKSON, P.J. (2007) 'Change prediction for mass customized products: A product model view' in MCPC 2007 World Conference on Mass Customization & Personalization (MCP), Cambridge, Boston, USA,
KILPINEN, M.S., ECKERT, C.M. and CLARKSON, P.J. (2007) 'The emergence of change at the interface of system and embedded software design' in 5th Conference on Systems Engineering Research (CSER 2007), Stevens Institute of Technology Campus, Hoboken, NJ, USA,
KILPINEN, M.S., ECKERT, C.M. and CLARKSON, P.J. (2007) 'Change propagation at the interface of system and embedded software design: characterising impact analysis task and techniques' in 16th International Conference on Engineering Design (ICED'07), Paris, France, 641-642
KIM, S., AHMED, S. and WALLACE, K.M. (2007) 'Improving information extraction from documents' in Journal of Mechanical Engineering, 53 (7-8), 429-441 (Published)
KIM, S. and WALLACE, K.M. (2007) 'Identifying design errors and human errors using multiclass classifications' in 16th International Conference on Engineering Design (ICED'07), France, Paris, 439-440
KIM, S., BRACEWELL, R.H. and WALLACE, K.M. (2007) 'Answering engineers' questions using semantic annotations' in Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 21 (2), 155-171
KIM, S., BRACEWELL, R.H. and WALLACE, K.M. (2007) 'Improving design reuse using context' in 16th International Conference on Engineering Design (ICED'07), France, Paris, 177-178
KIM, S., BRACEWELL, R.H. and WALLACE, K.M. (2007) 'Improving the reuse of root cause analysis using semantic annotation' in 1st European Semantic Technology Conference (ESTC 2007), Vienna, Austria,
KIM, S., BRACEWELL, R.H. and WALLACE, K.M. (2007) 'A framework for automatic causality extraction using semantic similarity' in ASME 2007 International Design Engineering Technical Conferences (IDETC/CIE2007), Las Vegas, Nevada, USA,
KIPOUROS, T., MOLINARI, M., DAWES, W.N., PARKS, G.T., SAVILL, M. and JENKINS, K.W. (2007) 'An investigation of the potential for enhancing the computational turbomachinery design cycle using surrogate models and high performance parallelisation' in ASME Turbo Expo 2007, Montreal, Canada, 1415-1424
KOH, E.C.Y., KELLER, R., ECKERT, C.M. and CLARKSON, P.J. (2007) 'Component classification: a change perspective' in 9th International Design Structure Matrix Conference (DSM'07), Munich, Germany,
LANGDON, P., CLARKSON, P.J. and ROBINSON, P. (2007) 'Designing accessible technology (editorial)' in Universal Access in the Information Society, 6 (2), 117-217 (1615-5289)
LANGDON, P., LEWIS, T. and CLARKSON, P.J. (2007) 'The effects of prior experience on the use of consumer products' in Universal Access in the Information Society, 6 (2), 179-191 (1615-5289)
LEWIS, T., LANGDON, P.M, and CLARKSON, P.J. (2007) 'Cognitive aspects of ageing and product interfaces: interface type' in Universal Access in Human-Computer Interaction: Coping with Diversity, 4th International Conference on Universal Access in Human-Computer Interaction, UAHCI 2007, Beijing, P.R. China, 4554, 731-740 (978-3-540-73278-5)
LEWIS, T., LANGDON, PM. and CLARKSON, P.J. (2007) 'Detailed effects of experience in inclusive design' in International Conference on Contemporary Ergonomics (CE2007), Nottingham, 357-362
LI, J-P., BALAZS, M.E. and PARKS, G.T. (2007) 'Engineering design optimization using species conserving genetic algorithms' in Engineering Optimization, 39, 147-161
LIU, S., MCMAHON, C.A. and BRACEWELL, R.H. (2007) 'A web-based semantic information retrieval system to support decision-making in collaborative design' in 16th International Conference on Engineering Design (ICED'07), France, Paris, 483-484
LYONS, M.N. (2007) 'Should patients have a role in patient safety? - a safety engineering view' in Quality and Safety in Healthcare,
LYONS, M.N., BROWN, R. and WEARS, R. (2007) 'Factors that affect the flow of patients through triage' in Emergency Medicine Journal, 24 (2), 78-85 (in print)
LYONS, M.N., GRAINGER, S., SALAZAR, M. and GUPTA, A. (2007) 'Adapting barrier analysis for the healthcare context - a case study in critical care' in Patient Safety Research Shaping the European Agenda, Porto, Portugal, (in press)
LYONS, M.N., WARD, J.R., BARCLAY, S., ANDERSON, J., BUCKLE, P. and CLARKSON, P.J. (2007) 'The feasibility of applying a systematic human error reduction and prediction approach (SHERPA) in healthcare: a case study of repeat prescribing in primary care' in Patient Safety Research Shaping the European Agenda, Porto, Portugal, (in press)
MAIER, A.M. (2007) 'A grid-based assessment method for communication in engineering design', PhD-thesis, Cambridge University Engineering Department
MAIER, A.M., KREIMEYER, M., HEPPERLE, C., ECKERT, C.M., LINDEMANN, U. and CLARKSON, P.J. (2007) 'Associations between factors influencing engineering design communication' in 16th International Conference on Engineering Design (ICED'07), Paris, France, 649-650
MARTIN, G.C., HOLBURN, D.M., CALDWELL, N.H.M. and BRETON, B.C. (2007) 'Virtual SEM (VSEM) - evaluation of a SEM teaching and training tool' in Microscopy and Microanalysis, 13 (2), 1724-1725 (1431-9276)
MEDEIROS, A.C.B. (2007) 'The Influence of ageing on product experience', Cambridge University Engineering Department, First Year Report
MIECZAKOWSKI, A.K., HOLDRIDGE, K. and RUGG, G. (2007) 'Putting PCT websites at the heart of healthcare services' in The British Journal of Healthcare Computing & Information Management, 24 (1), 19-21
MOLINA-CRISTOBAL, A., PAPAGEORGIOU, C., PARKS, G.T., SMITH, M.C. and CLARKSON, P.J. (2007) 'Multi-objective Controller Design: Evolutionary Algorithms and Bilinear Matrix Inequalities for a Passive Suspension' in IFAC Workshop on Control Applications of Optimization, Cachan, France, 386-391
MORRIS, A., GOODMAN, J. and BRADING, H. (2007) 'Internet use and non-use: views of older users' in Universal Access in the Information Society, 6 (1)
MORRIS, Z.S. (2007) 'Framework Development Literature Review: RIGHT Working Paper', Engineering Design Centre
MOULTRIE, J., CLARKSON, P.J. and PROBERT, D.R. (2007) 'Development of a Design Audit Tool for SMEs' in Journal of Product Innovation Management, 24 (4), 335-368
MOULTRIE, J., PROBERT, D. and CLARKSON, P.J. (2007) 'A review of maturity based tools to assess product development capability' in R&D Management, (submitted)
PATKAI, N. (2007) 'Supporting engineering change management', Certificate of Postgraduate Study, Cambridge University Engineering Department
PERSAD, U., LANGDON, P.M. and CLARKSON, P.J. (2007) 'Characterising user capabilities to support inclusive design evaluation' in Universal Access in the Information Society (UAIS), 6 (2), 119-135
PERSAD, U., LANGDON, P.M. and CLARKSON, P.J. (2007) 'A framework for analytical inclusive design evaluation' in 16th International Conference on Engineering Design (ICED'07), Paris, France, 817-818
PERSAD, U., LANGDON, P.M., BROWN, D.C. and CLARKSON, P.J. (2007) 'Cognitive scales and mental models for Inclusive Design' in Proceedings of HCI International 2007, 12th International Conference, HCI International 2007, with 8 Further Associated Conferences, Beijing, P.R. China, 4554, 776-785 (978-3-540-73352-2)
ROBERTSON, H. (2007) 'Hydrodynamic design optimization for high performance yachts', Cambridge University Engineering Department, First Year Report
SALUSTRI, F.A. and ENG, N. (2007) 'Designing as...: thinking about what designing might be' in Design Principles and Practices: An International Journal, 1 (1), 19-28
SALUSTRI, F.A. and ENG, N. (2007) 'Designing as...: thinking about what designing might be' in 16th International Conference on Engineering Design (ICED'07), Paris, France, 173-174
SALUSTRI, F.A., BRACEWELL, R.H., ENG, N. and WEERASINGHE, J.S. (2007) 'Visualising early engineering design information with diagrams' in Journal of Design Research, (accepted)
SHIN, I., KIM, S. and MCMAHON, C. (2007) 'An approach to capture design-induced error using an ontology' in Workshop on the Semantic Web and Web 2.0 in Architectural, Product and Engineering Design, conjunction with the 6th International Semantic Web Conference, Busan, Korea, 81-91
SIMPSON, I., UNDERWOOD, R., CUNEY, S., GUPTA, S., DAVIES, G., DUFOUR, F., OAKLEY, J. and POCOCK, A. (2007) 'Optimising Mouthpiece Design for Delivery and Usability' in The Aerosol Society Drug Delivery to the Lungs 18, Edinburgh, Scotland, UK,
SKINNER, B.A., PALMER, P.R. and PARKS, G.T. (2007) 'Multi-objective design optimisation of submarine electric drive systems' in IEEE Electric Ship Technologies Conference (IEEE EST 2007), Arlington, VA, USA,
SKINNER, B., PALMER, P.R. and PARKS, G.T. (2007) 'Multi-objective evolutionary optimisation of submarine electric drive - system design and hybrid drive control strategy' in International Conference on Computational Methods in Marine Engineering (MARINE 2007), CIMNE, Barcelona, Spain,
STACEY, M.K., ECKERT, C.M. and EARL, C.F. (2007) 'From ronchamp by sledge: on the pragmatics of object references' in The seventh Design Thinking Research Symposium (DTRS7), London, UK,
UNDERWOOD, R., DAVIES, G., DUFOUR, F., SIMPSON, I., POCOCK, A., CUNEY, S., OAKLEY, J. and GUPTA, S. (2007) 'Using Computational Modelling to Improve Dry Powder Inhaler Performance' in The Aerosol Society Drug Delivery to the Lungs 18, Edinburgh, Scotland, UK,
WALLACE, K.M. and BLESSING, L.T.M. (2007) 'Engineering design - a systematic approach by Pahl, G. and Beitz, W. (3rd ed)', Springer
WALLER, S.D., GOODMAN-DEANE, J., BRADLEY, M., LANGDON, P.M. and CLARKSON, P.J. (2007) 'Quantifying exclusion for tasks related to product interaction' in Universal Access in the Information Society, 5 (4), 341-349
WARD, J.R., LYONS, M.N., ANDERSON, J., BARCLAY, S., BUCKLE, P. and CLARKSON, P.J. (2007) 'Investigating the use of proactive hazard analysis in the UK' in Patient Safety Research: Shaping the European Agenda, Porto, Portugal,
WARD, J.R., LYONS, M.N., BARCLAY, S., ANDERSON, J., BUCKLE, P. and CLARKSON, P.J. (2007) 'Using fault tree analysis (FTA) in healthcare: a case study of repeat prescribing in primary care' in Patient Safety Research: Shaping the European Agenda, Porto, Portugal,
WILD, P., ECKERT, C.M. and CLARKSON, P.J. (2007) 'Review of service design approaches', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR144
WILD, P., ECKERT, C.M. and CLARKSON, P.J. (2007) 'Review of service design definition', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR143
WILD, P.J., JUPP, J.R., KERLEY, W., ECKERT, C.M. and CLARKSON, P.J. (2007) 'Towards a framework for profiling of products and services' in International Conference on Manufacturing Research (ICMR 2007), Leicester, UK,
WYNN, D.C. (2007) 'Model-based approaches to support process improvement in complex product development', PhD-thesis, Cambridge University Engineering Department
WYNN, D.C., ECKERT, C.M. and CLARKSON, P.J. (2007) 'Modelling iteration in engineering design' in 16th International Conference on Engineering Design (ICED'07), Paris, France, 693-694
YANG, X.S., LEES, J.M. and MORLEY, C.T. (2007) 'Nonlinear finite element 3-D simulations of CFRP shear strengthening' in Proceedings, 3rd International Conference on Advanced Composites in Construction (ACIC 07), University of Bath, UK,
YANG, X.S., LEES, J.M. and MORLEY, C.T. (2007) 'Comparison of CFRP strengthening methods: straps vs fabrics' in Proceedings, The 8th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures (FRPRCS-8), University of Patras, Patras, Greece,

2006

AHMED, S. (2006) 'Database arrangement', Canada, Japan, Norway, South Africa, United States, PCT/GB2004/00201, 20 January 2004 2006 Application filed
AHMED, S. and WALLACE, K.M. (2006) 'Reusing design knowledge' in Advances in design, 75-86
ARIYO, O.O., ECKERT, C.M. and CLARKSON, P.J. (2006) 'Unpleasant surprises in the design of complex products: why do changes propagate?' in 2006 ASME International Design Engineering Technical Conferences (IDETC/CIE2006), Philadelphia, USA, 1057-1064
ARIYO, O.O., ECKERT, C.M. and CLARKSON, P.J. (2006) 'On the use of functions, behaviour and structural relations as cues for engineering change prediction' in 9th International Design Conference (DESIGN 2006), Dubrovnik, Croatia, 2, 773-781
AURISICCHIO, M., BRACEWELL, R.H. and WALLACE, K.M. (2006) 'Characterising in detail the information requests of engineering designers' in 2006 ASME International Design Engineering Technical Conferences (IDETC/CIE2006), Philadelphia, USA, 1057-1064
AURISICCHIO, M., BRACEWELL, R.H. and WALLACE, K.M. (2006) 'Evaluation of DRed a way of capturing and structuring engineering design processes' in NordDesign 2006, Reykjavik, Iceland,
AURISICCHIO, M., BRACEWELL, R.H. and WALLACE, K.M. (2006) 'Characterising the information requests of engineering designers' in 9th International Design Conference (DESIGN 2006), Dubrovnik, Croatia, 2, 1057-1064
AURISICCHIO, M., KIM, S. and WALLACE, K.M. (2006) 'Automatic interpretation of engineering design questions' in International Design Research Symposium, Seoul, Korea, 233-241
BALDOCK, R. and SHEA, K. (2006) 'Structural topology optimization of braced steel frameworks using genetic programming' in 13th International Workshop of the European Group for Intelligent Computing in Engineering (EG-ICE), Ascona, Switzerland,
BELL, T.A., JARRETT, J.P. and CLARKSON, P.J. (2006) 'Exploring multidisciplinary trade-offs in turbomachinery design' in ASME Turbo Expo 2006, Barcelona, Spain, 1445-1454
BELL, T.A., JARRETT, J.P. and CLARKSON, P.J. (2006) 'Multidisciplinary constraint visualization and trade-off exploration in aero engine preliminary design' in 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Newport, Rhode Island, USA,
BOLOGNINI, F., SHEA, K., VALE, C.W. and SESHIA, A. (2006) 'A multicriteria system based method for simulation-driven design synthesis' in 2006 ASME International Design Engineering Technical Conferences (IDETC/CIE2006), Philadelphia, USA,
BRACEWELL, R.H., WALLACE, K.M., MOSS, M. and KNOTT, D. (2006) 'Capturing design rationale' in Computer Aided Design, (submitted)
BUCKLE, P., ANDERSON, J., WARD, J.R. and JEFFCOTT, S. (2006) 'Patient safety: the benefits of Almus pharmaceutical packaging', The Design for Patient Safety Initiative (Universities of Surrey and Cambridge), Internal report to Almus Pharmaceuticals
BUCKLE, P., CLARKSON, P.J., COLEMAN, R., WARD, J.R. and ANDERSON, J. (2006) 'Patient safety, systems design and ergonomics' in Applied Ergonomics, 37 (4), 491-500
CARDOSO, C. and CLARKSON, P.J. (2006) 'Impairing designers: using calibrated physical restrainers to empathise with users' in 2nd International Conference for Universal Design in Kyoto, International Association for Universal Design, Kyoto, Japan,
CHALUPNIK, M. (2006) 'Modelling design processes to improve process robustness', Cambridge University Engineering Department, First Year Report
CHALUPNIK, M., ECKERT, C.M. and CLARKSON, P.J. (2006) 'Modelling design processes to improve robustness' in 6th Integrated Product Development Workshop (IPD 2006), Schoenebeck/Bad Salzelmen b. Magdeburg, Germany,
CHALUPNIK, M.J. (2006) 'Product realization for a global manufacturing enterprise: current and future challenges' in NSF/ASME Design Essay Competition at 2006 ASME International Design Engineering Technical Conferences (IDETC/CIE2006), Philadelphia, USA,
CLARKSON, P.J. (2006) 'An optimal design process for an adequate product' in Design methods for practice - 5th International Seminar and Workshop of Engineering Design Integrated Product Development (EDIProD 2006), Gronow, Poland, DS 37, 21-26
CLARKSON, P.J., LANGDON, P.M. and NERY, D. (2006) 'Development of a task analysis language approach to be used as a tool for defining product exclusion' in Australasian Computer-Human Interaction Conference (OZCHI 2006), Sydney, Australia,
CLARKSON, P.J., LANGDON, P.M. and ROBINSON, P. (2006) 'Designing accessible technology', Springer Verlag
CLARKSON, P.J., LANGDON, P.M., ROBINSON, P. and GOODMAN, J. (2006) 'Proceedings, 3rd Cambridge Workshop on Universal Access and Assistive Technology (Incorporating the 6th Cambridge Workshop on Rehabilitation Robotics)', Cambridge University Engineering Department CUED/C-EDC/TR139
CRILLY, N. and CLARKSON, P.J. (2006) 'The influence of consumer research on product aesthetics' in 9th International Design Conference (DESIGN 2006), Dubrovnik, Croatia, 689-696
CRILLY, N., BLACKWELL, A.F. and CLARKSON, P.J. (2006) 'Graphic elicitation: using research diagrams as interview stimuli' in Qualitative Research, 6 (3), 341-366
CRILLY, N., CLARKSON, P.J. and BLACKWELL, A.F. (2006) 'Using research diagrams for member validation in qualitative research' in Diagrammatic Representation and Inference: 4th International Conference (Diagrams 2006), Stanford, CA, USA, 4045, 258-262
DONG, H., BOBJER, O., MCBRIDE, P. and CLARKSON, P.J. (2006) 'Inclusive product design: industrial case studies from the UK and Sweden' in Contemporary Ergonomics, 2006, 338-342
ECKERT, C.M. and DO, Y-L. (2006) 'Understanding, representing and reasoning about style' in Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 20 (3)
ECKERT, C.M., BLACKWELL, A.F., STACEY, M.K. and EARL, C.F. (2006) 'Sketching across design domains' in Visual Communication, (accepted)
ECKERT, C.M., KELLER, R., EARL, C.F. and CLARKSON, P.J. (2006) 'Supporting change processes in design: complexity, prediction and reliability' in Reliability Engineering & System Safety, 91 (12), 1521-1534
ENG, N.L. and SALUSTRI, F.A. (2006) 'Rugplot visualization for preliminary design' in Ontario, Canada,
FLANAGAN, T. (2006) 'Supporting design planning through process model simulation', PhD-thesis, Cambridge University Engineering Department
FLANAGAN, T., ECKERT, C.M., CLARKSON, P.J. and KELLER, R. (2006) 'Overview: The link between project plans and industrial reality' in Theory and Methods of Competitive Engineering, Ljubljana, Slovenia,
FLANAGAN, T., ECKERT, C.M., KELLER, R. and CLARKSON, P.J. (2006) 'Bridging the gaps between project plans and reality: the role of overview' in 6th International Symposium on Tools and Methods of Competitive Engineering (TMCE 2006), Ljubljana, Slovenia, 1, 105-116
GHISU, T. (2006) 'Robust aerodynamic design optimisation of compression systems', Cambridge University Engineering Department, First Year Report
GHISU, T., PARKS, G.T., JARRETT, J.P. and CLARKSON, P.J. (2006) 'Multi-objective optimisation of aero-engine compressors' in 3rd International Conference on the future of gas turbine technology, Brussels,
GOODMAN, J., CASSIM, J., LANGDON, P.M. and CLARKSON, P.J. (2006) 'Developing design methodologies for designing for elderly with elderly' in HCI 2006, London, UK,
GOODMAN, J., CASSIM, J., LANGDON, P.M. and CLARKSON, P.J. (2006) 'Participatory design with disabled people in a designer-centred inclusive design competition' in Developing Design Methodologies for Designing for Elderly with Elderly, Workshop at HCI 2006, London, UK,
GOODMAN, J., CLARKSON, P.J. and LANGDON, P.M. (2006) 'Providing information about older and disabled users to designers' in HCI, the Web and the Older Population, Workshop at HCI 2006, London, UK,
GOODMAN, J., DICKINSON, A., KEITH, S. and WHITNEY, G. (2006) 'HCI, the Web and the Older Population, Workshop at HCI 2006'
GOODMAN, J., DONG, H., LANGDON, P.M. and CLARKSON, P.J. (2006) 'Increasing the uptake of inclusive design in industry.' in Gerontechnology. International journal on the fundamental aspects of technology to serve the ageing society, 5 (3), 140-149
GOODMAN, J., DONG, H., LANGDON, P.M. and CLARKSON, P.J. (2006) 'Industry's response to inclusive design: a survey of current awareness and perceptions' in Ergonomics 2006, Cambridge, UK, 368-372
GOODMAN, J., DONG, H., LANGDON, P.M. and CLARKSON, P.J. (2006) 'Factors involved in industry's response to inclusive design' in Designing accessible technology, 31-40
GOODMAN, J., LANGDON, P.M. and CLARKSON, P.J. (2006) 'Equipping designers for inclusive design' in Gerontechnology. International journal on the fundamental aspects of technology to serve the ageing society, 4 (4), 229-233
GOODMAN, J., LANGDON, P.M. and CLARKSON, P.J. (2006) 'Providing strategic user information for designers: methods and initial findings' in Designing accessible technology, 41-52
GOURTOVAIA, M. and BRACEWELL, R.H. (2006) 'Knowledge management in design for six sigma: a review for the high performance and robust systems', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR134
GUPTA, S.P. (2006) 'Migration of medical devices into the home environment: driving factors' in 9th Annual Conference of the UK Federation of Primary Care Research Organisations, Liverpool, UK,
GUPTA, S.P., WARD, J.R., JEFFCOTT, S. and CLARKSON, P.J. (2006) 'Increasing use of medical devices in the home environment' in Institute of Physics and Engineering in Medicine (IPEM) Annual Scientific Meeting, Cambridge, UK,
HINRICHS, S. (2006) 'Improving patient safety through the procurement process', Cambridge University Engineering Department, First Year Report
HINRICHS, S. and WARD, J.R. (2006) 'The Safe Road to Sales' in On Target, (HSP6 December)
HINRICHS, S., WARD, J.R., DICKERSON, T. and CLARKSON, P.J. (2006) 'A systems approach to improving patient safety through procurement' in Institute of Physics and Engineering in Medicine (IPEM) Annual Scientific Meeting, Cambridge, UK,
HUTABARAT, W., PARKS, G.T., JARRETT, J.P. and CLARKSON, P.J. (2006) 'A new approach to aerodynamic topology optimization' in Adaptive Computing in Design and Manufacture (ACDM 06), Bristol, UK,
JAFRI, T. (2006) 'Improving medication safety', Cambridge University Engineering Department, First Year Report
JAFRI, T. (2006) 'Are we making progress?' in Health Matters, (64), 8-9
JAGTAP, S., JOHNSON, A.L., AURISICCHIO, M. and WALLACE, K.M. (2006) 'How in-service experience informs design modifications: a case study in aero engines' in International Conference on Trends in Product Life Cycle, Modelling Simulation and Synthesis (PLMSS-2006), India,
JAGTAP, S., JOHNSON, A.L., AURISICCHIO, M. and WALLACE, K.M. (2006) 'Pilot empirical study: Interviews with product designers and service engineers', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR140
JARRATT, T.A.W., ECKERT, C.M. and CLARKSON, P.J. (2006) 'Pitfalls of engineering change: change practice during complex product design' in Advances in design, 413-424
JARRATT, T., ECKERT, C.M. and CLARKSON, P.J. (2006) 'Change is inevitable: A taxonomy of change in engineering design', Cambridge University Engineering Department CUED/C-EDC/TR151
JARRETT, J.P. (2006) 'Multi-fidelity CFD and Optimisation in the Design of Complex Systems' in Automated Design and Optimisation Techniques using CFD, London, UK,
JARRETT, J.P. (2006) 'Multi-fidelity gradient-based optimization in turbomachinery aerodynamic design' in The 2nd AIAA Multidisciplinary Design Optimization Specialist Conference, Newport, Rhode Island, USA,
JARRETT, J.P., BELL, T.A. and CLARKSON, P.J. (2006) 'Towards orthogonal turbomachinery design' in ASME Turbo Expo 2006, Barcelona, Spain, 1269-1277
KELLER, R., ECKERT, C.M. and CLARKSON, P.J. (2006) 'Heuristics for change prediction' in 9th International Design Conference (DESIGN 2006), Dubrovnik, Croatia, 2, 873-880
KELLER, R., ECKERT, C.M. and CLARKSON, P.J. (2006) 'Building connectivity models in design: representations and tools to support cognitive preferences' in Design Computation and Cognition 06, Eindhoven, The Netherlands, 41-60
KELLER, R., ECKERT, C.M. and CLARKSON, P.J. (2006) 'Using an engineering change methodology to support conceptual design', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR141
KELLER, R., ECKERT, C.M. and CLARKSON, P.J. (2006) 'Matrices or node-link diagrams: which visual representation is better for visualising connectivity models?' in Information Visualization, 5 (1), 62-76
KELLER, R., FLANAGAN, T., ECKERT, C.M. and CLARKSON, P.J. (2006) 'Two sides of the story: Visualising products and processes in engineering design' in 10th International Conference Information Visualisation (IV'06), London, UK, 1648286, 362-367
KILPINEN, M.S., CLARKSON, P.J. and ECKERT, C.M. (2006) 'Change impact analysis at the interface of the system design and embedded software' in 9th International Design Conference (DESIGN 2006), Dubrovnik, Croatia, 2, 881-888
KIM, S. (2006) 'From design errors to design opportunities using a machine learning approach' in 6th International Conference on Practical Aspects of Knowledge Management (PAKM 2006), Austria,
KIM, S., AHMED, S. and WALLACE, K.M. (2006) 'Improving document accessibility through ontology-based information sharing' in 6th International Symposium on Tools and Methods of Competitive Engineering (TMCE 2006), Ljubljana, Slovenia, 2, 923-934
KIM, S., BRACEWELL, R.H., AHMED, S. and WALLACE, K.M. (2006) 'Semantic annotation to support automatic taxonomy classification' in 9th International Design Conference (DESIGN 2006), Dubrovnik, Croatia, 2, 1171-1178
KIM, S., BRACEWELL, R.H. and WALLACE, K.M. (2006) 'Design rationale retrieval using summarisation' in International Design Research Symposium, Seoul, Korea, 212-221
KIPOUROS, T. (2006) 'Multi-objective aerodynamic design optimisation', PhD-thesis, Cambridge University Engineering Department
LANGDON, P.M., GODSILL, S. and CLARKSON, P.J. (2006) 'Statistical estimation of user's interactions from motion impaired cursor use data' in 6th International Conference on Disability, Virtual Reality and Associated Technologies (ICDVRAT 2006), Esbjerg, Denmark,
LANGDON, P.M., PERSAD, U. and CLARKSON, P.J. (2006) 'Developing a model of capability for inclusive design: The hidden structure of the ONS disability data' in Disability Studies Association Conference 2006. 'Disability Studies: Research and Learning', Lancaster University, UK,
LEWIS, T., LANGDON, P.M. and CLARKSON, P.J. (2006) 'Investigating the role of experience in the use of consumer products' in Designing accessible technology, 189-198
LEWIS, T., LANGDON, P.M. and CLARKSON, P.J. (2006) 'User responses to the learning demands of consumer products' in Contemporary Ergonomics, 2006, 258-262
MAIER, A.M., ECKERT, C.M. and CLARKSON, P.J. (2006) 'Identifying requirements for communication support: A maturity grid-inspired approach' in Expert Systems with Applications, 31 (4), 663-672 (Available online from 24 January 06)
MAIER, A.M., KREIMEYER, M., HERFELD, U., DEUBZER, F., LINDEMANN, U. and CLARKSON, P.J. (2006) 'Reflecting communication: a key factor for successful collaboration between embodiment design and simulation' in 9th International Design Conference (DESIGN 2006), Dubrovnik, Croatia, 2, 1483-1490
MARTIN, G.C., HOLBURN, D.M., BRETON, B.C. and CALDWELL, N.H.M. (2006) 'Virtual SEM (VSEM) - developing integrated courseware for SEM Training' in Microscopy and Microanalysis, 12 (2), 218-219
MATTHEWS, P.C., STANDINGFORD, W.F., HOLDEN, C.M.E. and WALLACE, K.M. (2006) 'Learning inexpensive parametric design models using an augmented genetic programming technique' in Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 20, 1-18
MAURER, M., PULM, U., BALLESTREM, F., CLARKSON, P.J. and LINDEMANN, U. (2006) 'The subjective aspects of design structure matrices - Analysis of comprehension and application and means to overcome differences' in 8th Biennial ASME Conference Engineering Systems Design and Analysis (ESDA 2006), Torino, Italy,
MOLINA-CRISTOBAL, A., PARKS, G.T. and CLARKSON, P.J. (2006) 'Finding robust solutions to multi-objective optimisation problems using polynomial chaos' in 6th ASMO UK/ISSMO Conference on Engineering Design Optimization, Oxford, UK,
MOLINARI, M. and DAWES, W.N. (2006) 'A review of evolution of compressor design process and future perspectives' in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 220 (6)
MOLINARI, M., JARRETT, J.P., CLARKSON, P.J. and DAWES, W.N. (2006) 'Characterizing the design space in multi-objective axial compressor blade shape optimization' in 2nd AIAA Multidisciplinary Design Optimization Specialist Conference, Newport, Rhode Island, USA,
MOULTRIE, J., CLARKSON, P.J. and PROBERT, D.R. (2006) 'Development of a product audit tool' in Journal of Engineering Manufacture, Proceedings of Institution of Mechanical Engineers, Part B, 220 (7), 1157-1174
MOULTRIE, J., CLARKSON, P.J. and PROBERT, D.R. (2006) 'A tool to evaluate design performance in SMEs' in International Journal of Productivity and Performance Measurement, Special Edition on Performance in Design and Manufacture, Vol. 55 (3 & 4), 184-216
PERSAD, U., LANGDON, P.M. and CLARKSON, P.J. (2006) 'Exploring user capabilities and health: A population perspective' in Contemporary Ergonomics 2006, Cambridge, UK, 373
PERSAD, U., LANGDON, P.M. and CLARKSON, P.J. (2006) 'Inclusive design evaluation and the capability-demand relationship' in Designing accessible technology, 177-188
PERSAD, U., LANGDON, P.M. and CLARKSON, P.J. (2006) 'Inclusive design evaluation and the capability-demand relationship' in CWUAAT 2006, Cambridge, UK,
PERSAUD, R. and SYMONS, D.D. (2006) 'Design and testing of a composite timber and concrete floor system' in Journal of the Structural Engineering Society New Zealand, 19 (1), 30-43
SHIN, I., KIM, S., BUSBY, J.S., HIBBERD, R.E. and MCMAHON, C.A. (2006) 'An application of semantic annotations to design errors' in IEEE International Conference on Hybrid Information Technology, Seoul, Korea,
SIRISALEE, P., ASHBY, M.F., PARKS, G.T. and CLARKSON, P.J. (2006) 'Multi-criteria material selection of monolithic and multi-materials in engineering design' in Advanced Engineering Materials, (8), 48-56
SKINNER, B. (2006) 'The development of optimisation tools for power systems', Cambridge University Engineering Department, First Year Report
SKINNER, B. (2006) 'Electrical power systems in warships and submarines', Cambridge University Engineering Department, Technical Report
STRICKFADEN, M., RODGERS, P. and LANGDON, P.M. (2006) 'Referencing the sociocultural during designing' in 2006 Design Research Society International Conference, Lisbon, Portugal,
WALLACE, K.M. (2006) 'How engineering designers retrieve information.' in Design Methods for Practice. Proceedings of EDIProD 2006, Zielona Gora, Poland, 171-177
WARD, J.R. and CLARKSON, P.J. (2006) 'Human factors engineering and the design of medical devices' in Handbook of human factors and ergonomics in healthcare and patient safety, 367-382
WEAL, M.J., ALANI, H., KIM, S., LEWIS, P.H., MILLARD, D.E., SINCLAIR, P.A.S., DE ROURE, D.C. and SHADBOLT, N.R. (2006) 'Ontologies as facilitators for repurposing web documents' in Journal of Human-Computer Studies,
WITTNER, B., WARD, J.R., JEFFCOTT, S. and CLARKSON, P.J. (2006) 'Alarm design for medical devices' in Institute of Physics and Engineering in Medicine (IPEM) Annual Scientific Meeting 2006, Cambridge, UK,
WYNN, D.C., ECKERT, C.M. and CLARKSON, P.J. (2006) 'Applied signposting: a modeling framework to support design process improvement' in 2006 ASME International Design Engineering Technical Conferences (IDETC/CIE2006), Philadelphia, USA, DETC2006-99402
WYSE, S.G., CANT, R.S. and PARKS, G.T. (2006) 'Towards the multiobjective optimisation of gas turbine combustion chambers' in ASME Turbo Expo 2006, Barcelona, Spain,
YAO, N., PARKS, G.T. and CLARKSON, P.J. (2006) 'Automatic cost estimation of injection-moulded components using medial object transformation technology feature recognition' in 6th ASMO-UK/ISSMO International Conference on Engineering Design Optimization, Oxford, UK,

2005

ADAMS, R. and LANGDON, P.M. (2005) 'Exploring cognitive factors for universal access (Ua)' in 11th International Conference on Human Computer Interaction (HCII 2005), Las Vegas, Nevada, USA,
AHMED, S. (2005) 'Encouraging reuse of design knowledge: a method to index knowledge' in Design Studies, 26 (6), 565-592
AHMED, S., BRACEWELL, R.H. and KIM, S. (2005) 'Engineering knowledge management' in Engineering design - theory and practice. A symposium in honour of Ken Wallace, 1-7
AHMED, S., HACKER, P. and WALLACE, K.M. (2005) 'The role of knowledge and experience in engineering design' in 15th International Conference on Engineering Design (ICED'05), Melbourne, Australia, 206-207
AHMED, S., KIM, S. and WALLACE, K.M. (2005) 'A methodology for creating ontologies for engineering design' in 2005 ASME International Design Engineering Technical Conferences (IDETC/CIE2005), Long Beach, California, USA,
ASHBY, M.F. and CEBON, D. (2005) 'Materials and design - creating the connections' in Engineering design - theory and practice. A symposium in honour of Ken Wallace, 81-21
AURISICCHIO, M. (2005) 'Characterising information acquisition in engineering design', PhD-thesis, Cambridge University Engineering Department
BALDOCK, R. and SHEA, K. (2005) 'Combining continuum topology optimization and structural design guidelines for bracing system design in multistory steel building frames' in Soft Computing in Engineering, the 12th International Workshop of the European Group for Intelligent Computing in Engineering (EG-ICE), Radziejowice, Poland,
BALDOCK, R., SHEA, K. and ELEY, D. (2005) 'Evolving optimized braced steel frameworks for tall buildings using modified pattern search' in International Conference on Computing in Civil Engineering (ASCE 2005), Cancun, Mexico,
BELL, C.P., JARRETT, J.P., CLARKSON, P.J. and DAWES, W.N. (2005) 'Improving the conceptual design of turbine rotor blade cooling systems' in 15th International Conference on Engineering Design (ICED'05), Melbourne, Australia, 421-422
BELL, T.A. and JARRETT, J.P. (2005) 'An integrated approach to the conceptual design of aeroengines' in 6th International Conference on Computer-Aided Industrial Design & Conceptual Design (CAID & CD 2005), Delft, The Netherlands,
BLEY, E. (2005) 'Exploiting experiential knowledge in engineering change prediction', Cambridge University Engineering Department, First Year Report
BREWSTER, S., DARROCH, I., GOODMAN, J. and GRAY, P. (2005) 'The effect of age and font size on reading text on handheld computers' in Integrating Software Engineering and Usability Engineering (Interact 2005), Rome, (pre-EDC)
BRYANT, A.T., JAEGGI, D.M., PARKS, G.T. and PALMER, P.R. (2005) 'The influence of operating conditions on multi-objective optimization of power electronic devices and circuits' in IEEE Industry Applications Society Conference Record, Hong Kong,
BUCKLE, P. and CLARKSON, P.J. (2005) 'Systems engineering' in Design process improvement - review of current practice, 88-113
BUCKLE, P., CLARKSON, P.J., COLEMAN, R., KENNEDY-MARTIN, M., STUBBS, D. and WARD, J.R. (2005) 'Systems design and patient safety' in Healthcare Systems Ergonomics and Patient Safety, HEPS 2005, Florence, Italy,
CARDOSO, C. (2005) 'Design for inclusivity - assessing the accessibility of everyday products', PhD-thesis, Cambridge University Engineering Department
CARDOSO, C., CLARKSON, P.J. and KEATES, S. (2005) 'Can users be excluded from an inclusive design process' in 11th International Conference on Human Computer Interaction (HCII 2005), Las Vegas, Nevada, USA,
CARDOSO, C., KEATES, S. and CLARKSON, P.J. (2005) 'Are users necessary for inclusive design?' in 15th International Conference on Engineering Design (ICED'05), Melbourne, Australia, 520.44
CARDOSO, C., KEATES, S. and CLARKSON, P.J. (2005) 'Supplementing user information during the inclusive design process' in International Conference on Inclusive Design and Communications (INCLUDE 2005), The Royal College of Art, London, UK,
CASSIM, J. and DONG, H. (2005) 'DBA Design Challenge: engaging design professionals with inclusive design' in ACM SIGACCESS Accessibility and Computing archive, 81 (January 05), 3-8
CHAKRABARTI, A. (2005) 'Some thoughts on definition, influences and measures for design creativity' in Engineering design - theory and practice. A symposium in honour of Ken Wallace, 42-51
CLARKSON, P.J. (2005) 'Inclusive design' in Engineering design - theory and practice. A symposium in honour of Ken Wallace, 52-61
CLARKSON, P.J. (2005) 'Critical factors associated with good design for the medical devices industry' in MTBR, Autumn/Winter
CLARKSON, P.J. (2005) 'Engineering Design Centre, University of Cambridge' in Design process improvement - a review of current practice, 470-473
CLARKSON, P.J. and ECKERT, C.M. (2005) 'Design process improvement - a review of current practice', Springer Verlag
CLARKSON, P.J. and HUHTALA, M.J. (2005) 'Engineering design - theory and practice. A symposium in honour of Ken Wallace (1st ed)', Engineering Design Centre, University of Cambridge, UK (159)
CRILLY, N. (2005) 'Product aesthetics: representing designer intent and consumer response', PhD-thesis, Cambridge University Engineering Department
CRILLY, N. and CLARKSON, P.J. (2005) 'The semiotics of product aesthetics: investigating the role of designer intent in determining product form' in Studying Designers '05, University of Provence, Aix-en-Provence, France, 343-348
CRILLY, N., BLACKWELL, A.F. and CLARKSON, P.J. (2005) 'Using diagrams in interviews' in 2nd Information Design International Conference 2005, So Paulo, Brazil., 141-149 (ISBN 978-85-89879-05-7)
DAVID, D. (2005) 'An exclusion analysis of consumer products', MPhil-thesis, Cambridge University Engineering Department
DEL-REY-CHAMORRO, F.M. and WALLACE, K.M. (2005) 'Understanding the search for information in the aerospace domain' in 15th International Conference on Engineering Design (ICED'05), Melbourne, Australia, 81-82
DONG, H. and CLARKSON, P.J. (2005) 'The framework of an inclusive design toolkit' in International Conference on Inclusive Design and Communications (INCLUDE 2005), The Royal College of Art, London, UK,
DONG, H. and CLARKSON, P.J. (2005) 'Combating barriers to inclusive design: evaluation of an inclusive design toolkit' in 15th International Conference on Engineering Design (ICED'05), Melbourne, Australia, 403-404
DONG, H., CASSIM, J. and CLARKSON, P.J. (2005) 'Best practice of critical user forums' in International Conference on Inclusive Design and Communications (INCLUDE 2005), The Royal College of Art, London, UK,
DONG, H., CLARKSON, P.J., CASSIM, J. and KEATES, S. (2005) 'Critical user forums - an effective user research method for inclusive design' in Design Journal, 8 (2), 49-59 (1460-6925)
EARL, C.F., ECKERT, C.M. and CLARKSON, P.J. (2005) 'Design change and complexity' in 2nd Workshop on Complexity in Design and Engineering, University of Glasgow, UK,
EARL, C.F., ECKERT, C.M., BUCCIARELLI, L., WHITNEY, D., KNIGHT, T., STACEY, M.K., BLACKWELL, A.F., MACMILLAN, S. and CLARKSON, P.J. (2005) 'Comparative study of design with application to engineering design' in 15th International Conference on Engineering Design (ICED'05), Melbourne, Australia, 335-336
EARL, C.F., JOHNSON, J. and ECKERT, C.M. (2005) 'Complexity' in Design process improvement - a review of current practice, 174-197
ECKERT, C.M. and CLARKSON, P.J. (2005) 'The reality of design' in Design process improvement - a review of current practice, 1-33
ECKERT, C.M., CLARKSON, P.J. and EARL, C.F. (2005) 'Predictability of change in engineering: a complexity view' in 2005 ASME International Design Engineering Technical Conferences (IDETC/CIE2005), Long Beach, California, USA, 5, 341-350
ECKERT, C.M., EARL, C.F., STACEY, M.K., BUCCIARELLI, L. and CLARKSON, P.J. (2005) 'Risk across design domains' in 15th International Conference on Engineering Design (ICED'05), Melbourne, Australia, 361-362
ECKERT, C.M., KELLER, R., EARL, C.F. and CLARKSON, P.J. (2005) 'Supporting change processes in design: complexity, prediction and reliability', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR136
ECKERT, C.M., MAIER, A.M. and MCMAHON, C. (2005) 'Communication in design' in Design process improvement - a review of current practice, 232-261
EGER, T. (2005) 'Design freeze during product development: supporting change prediction during detail design', PhD-thesis, Cambridge University Engineering Department
EGER, T., ECKERT, C.M. and CLARKSON, P.J. (2005) 'The role of design freeze in product development' in 15th International Conference on Engineering Design (ICED'05), Melbourne, Australia, 164-165
FLANAGAN, T., ECKERT, C.M., KELLER, R. and CLARKSON, P.J. (2005) 'Rework revisited: the criticality of iteration due to task failure in NPD planning' in IEEE International Engineering Management Conference (IEMC'05), Fairmont Hotel, St. John's, Newfoundland, Canada,
FLANAGAN, T., ECKERT, C.M., KELLER, R. and CLARKSON, P.J. (2005) 'Robust planning of design tasks using simulation' in 15th International Conference on Engineering Design (ICED'05), Melbourne, Australia, 365-366
FLANAGAN, T., KELLER, R., ECKERT, C.M. and CLARKSON, P.J. (2005) 'Simulation in project management: potential value and barriers to adoption' in Irish Academy of Management Annual Conference (IAM '05), Galway, Ireland,
GOODMAN, J. and DICKINSON, A. (2005) 'Workshop on HCI and the Older Population', Leeds, UK
GOODMAN, J. and LUNDELL, J. (2005) 'HCI and the Older Population' in Interacting with Computers, 17 (6), 613-620
GOODMAN, J., BREWSTER, S. and GRAY, P. (2005) 'Not just a matter of design: key issues surrounding the inclusive design process' in International Conference on Inclusive Design and Communications (INCLUDE 2005), The Royal College of Art, London, UK,
GOODMAN, J., BREWSTER, S. and GRAY, P. (2005) 'How can we best use landmarks to support older people in navigation' in Behaviour and Information Technology, 24 (1), 3-20 (pre-EDC)
GOODMAN, J., CLARKSON, P.J. and LANGDON, P.M. (2005) 'Developing tools for communicating inclusive design principles' in Accessible Design in the Digital World - Workshop at ADDW 2005, Dundee, UK,
GOODMAN, J., LANGDON, P.M. and CLARKSON, P.J. (2005) 'Providing strategic user information to designers' in HCI and the Older Population, workshop at the 19th British HCI Group Annual Conference, Napier University, Edinburgh, UK,
GOURTOVAIA, M. and SHEA, K. (2005) 'eifForm developer's manual', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR133
GUPTA, S.P. (2005) 'Understanding the big picture of current practice regarding the use of medical devices by non-professional users in home environments: an exploratory study', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR135
HORGAN, A., CREASEY, C., DEAN, K., TERRELL, S., HINRICHS, S., KABILAN, S., KEW, S. and MARSHALL, A. (2005) 'Holographic sensors for continuous and noninvasive glucose monitoring' in 5th Diabetes Technology Meeting, San Francisco, USA,
HUTABARAT, W. (2005) 'Aerodynamic topology optimisation', Cambridge University Engineering Department, First Year Report
HWANG, F. (2005) 'Cursor control for motion-impaired users', PhD-thesis, Cambridge University Engineering Department
HWANG, F., KEATES, S., LANGDON, P.M. and CLARKSON, P.J. (2005) 'Movement time prediction for tasks assisted by force-feedback: Effects of movement amplitude, target width, and gravity well width' in Universal Access in the Information Society, 4 (2), 85-95
HWANG, F., KEATES, S., LANGDON, P.M. and CLARKSON, P.J. (2005) 'A submovement analysis of cursor trajectories' in Behaviour and Information Technology, 24 (3), 205 - 217 (Spring)
HWANG, F., LANGDON, P.M., CLARKSON, P.J. and KEATES, S. (2005) 'A model of cursor movement for multiple haptic targets' in 11th International Conference on Human Computer Interaction (HCII 2005), Las Vegas, Nevada, USA,
HWANG, F., LANGDON, P.M., CLARKSON, P.J. and KEATES, S. (2005) 'A haptic toolbar for motion-impaired users' in 11th International Conference on Human Computer Interaction (HCII 2005), Las Vegas, Nevada, USA,
JAEGGI, D.M., PARKS, G.T., KIPOUROS, T. and CLARKSON, P.J. (2005) 'A multi-objective tabu search algorithm for constrained optimisation problems' in The 3rd International Conference of Evolutionary Multi-Criterion Optimisation, Guanajuato, Mexico, 3410, 490-504
JAFRI, T. (2005) 'Applying the engestrom's model of service development to the national service framework (NSF) for mental health: case study of Camden Primary Care Trust (PCT)' in 8th Annual Conference of the UK Federation of Primary Care Research Organisations, Bristol, UK, 79-80
JAGTAP, S. (2005) 'The capture and structure of service information for engineering designers', Cambridge University Engineering Department, First Year Report
JARRATT, T.A.W., CLARKSON, P.J. and ECKERT, C.M. (2005) 'Engineering change' in Design process improvement - a review of current practice, 262-285
JUN, G.T., WARD, J.R. and CLARKSON, P.J. (2005) 'Mapping the healthcare process in order to design for patient safety' in 15th International Conference on Engineering Design (ICED'05), Melbourne, Australia, 353-354
JUN, G.T., WARD, J.R. and CLARKSON, P.J. (2005) 'Comparison of national reporting systems for patient safety: UK's NRLS; US's Medwatch' in The 10th European Forum on Quality Improvement in Health Care, ExCeL Conference Centre, Docklands, London, UK,
KEATES, S., CLARKSON, P.J., LANGDON, P.M. and ROBINSON, P. (2005) 'Special issue on design for a more inclusive world (editorial)' in Universal Access in the Information Society, 4 (2), 83-84
KELLER, R. (2005) 'Interfaces to support engineering change' in 19th British HCI Group Annual Conference, Napier University, Edinburgh, UK, 2, 206-208
KELLER, R., ECKERT, C.M. and CLARKSON, P.J. (2005) 'Multiple views to support engineering change management for complex products' in 3rd International Conference on Coordinated & Multiple Views in Exploratory Visualization (CMV '05), London, UK, 1508219, 33-41
KELLER, R., ECKERT, C.M. and CLARKSON, P.J. (2005) 'Matrices or network diagrams: which visual representation is better for visualising connectivity models?', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR137
KELLER, R., ECKERT, C.M. and CLARKSON, P.J. (2005) 'Viewpoints and views in engineering change management' in 2nd Workshop in Complexity in Design and Engineering., Department of Computing Science, University of Glasgow, Scotland, UK, GIST Technical Report G2005-1, 168-172
KELLER, R., EGER, T., ECKERT, C.M. and CLARKSON, P.J. (2005) 'Visualising change propagation' in 15th International Conference on Engineering Design (ICED'05), Melbourne, Australia, 62-63
KILPINEN, M.S.S. (2005) 'Change propagation between mechanical and embedded software systems', Cambridge University Engineering Department, First Year Report
KIM, S., BRACEWELL, R.H. and WALLACE, K.M. (2005) 'A framework for design rationale retrieval' in 15th International Conference on Engineering Design (ICED'05), Melbourne, Australia, 252-253
KIPOUROS, T., JAEGGI, D.M., DAWES, W.N., PARKS, G.T. and SAVILL, M. (2005) 'Multi-criteria optimisation of turbomachinery blades: investigating the trade-off surface' in 41st AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, Tucson, Arizona, USA, AIAA-2005-4023
KIPOUROS, T., JAEGGI, D.M., DAWES, W.N., PARKS, G.T. and SAVILL, M. (2005) 'Multi-objective optimisation of turbomachinery blades using tabu search' in The 3rd International Conference of Evolutionary Multi-Criterion Optimisation, Guanajuato, Mexico, 3410, 897-910
KIPOUROS, T., JAEGGI, D.M., DAWES, W.N., PARKS, G.T. and SAVILL, M. (2005) 'Multi-objective aerodynamic design optimisation for axial compressors' in ERCOFTAC Bulletin, 66 (Sept), 21-24
LANGDON, P.M. and ADAMS, R. (2005) 'Cognitive inclusion: cognitive design considerations' in 11th International Conference on Human Computer Interaction (HCII 2005), Las Vegas, Nevada, USA,
LEWIS, T. and CLARKSON, P.J. (2005) 'A user study into customising for inclusive design' in International Conference on Inclusive Design and Communications (INCLUDE 2005), Royal College of Art, London, UK,
LIU, J-S., PARKS, G.T. and CLARKSON, P.J. (2005) 'Topology/shape optimisation of axisymmetric continuum structures - a metamorphic development approach' in Structural and Multidisciplinary Optimization, 29 (1), 73-83
MAIER, A.M., ECKERT, C.M. and CLARKSON, P.J. (2005) 'A meta-model for communication in engineering design' in Co-design, 1 (4), 243-254
MAIER, A.M., ECKERT, C.M. and CLARKSON, P.J. (2005) 'A meta-model for communication in engineering design' in International Workshop On Exploring Complexity in Collaborative Design and Solutions, London, UK,
MAIER, A.M., ECKERT, C.M. and CLARKSON, P.J. (2005) 'Auditing communication in design: A maturity grid-inspired approach' in 9th International Conference on Computer Supported Cooperative Work in Design (CSCWD 2005), Coventry, UK, 1, 62-68
MARTIN, G.C., BRETON, B.C., CALDWELL, N.H.M. and HOLBURN, D.M. (2005) 'Virtual SEM (VSEM) - a teaching and training solution for the SEM' in Microscopy and Microanalysis, 11 (2), 650-651
MEENOWA, J., HAMEED, M., FURNER, S. and LANGDON, P.M. (2005) 'Using haptic displays for workload reduction and inclusive control' in 11th International Conference on Human Computer Interaction (HCII 2005), Las Vegas, Nevada, USA,
O'DONOVAN, B.D., ECKERT, C.M., CLARKSON, P.J. and BROWNING, T. (2005) 'Design planning and modelling' in Design process improvement - a review of current practice, 60-87
PERSAD, U. and CLARKSON, P.J. (2005) 'Characterising users for inclusive design - three requirements' in International Conference on Inclusive Design and Communications (INCLUDE 2005), Royal College of Art, London, UK,
PERSAD, U., LANGDON, P.M. and CLARKSON, P.J. (2005) 'Assessing user capabilities from small scale samples' in 11th International Conference on Human Computer Interaction (HCII 2005), Las Vegas, Nevada, USA,
PERSAUD, R. and SYMONS, D.D. (2005) 'Design and testing of a composite timber and concrete floor system' in Structural Engineer, 84 (4), 22-30
PULM, U. (2005) 'Implications of sociological system theory on systems engineering and product development' in 15th Annual International Symposium of the International Council on Systems Engineering (INCOSE 2005), Rochester, NY, USA,
PULM, U. (2005) 'Product development as a complex social system' in 15th International Conference on Engineering Design (ICED'05), Melbourne, Australia, 407-408
PULM, U. and CLARKSON, P.J. (2005) 'The meaning and coherence of process, organisation and products in engineering design' in Integrated Design and Process Technology (IDPT-2005), Beijing, China,
PULM, U. and CLARKSON, P.J. (2005) 'The meaning and coherence of process, organisation and products in engineering design' in Journal of Integrated Design & Process Science, 9 (1), 55-66
SASS, l., SHEA, K. and POWELL, M. (2005) 'Design production: constructing freeform designs with rapid prototyping' in Digital Design: the quest for new paradigms (ECAADE 2005), Technical University of Lisbon, Lisbon, Portugal, 261-268
SHEA, K. and GOURTOVAIA, M. (2005) 'eifForm user's manual', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR132
SHEA, K. and LUEBKEMAN, C. (2005) 'CDO: computational design + optimization in building practice' in The Arub Journal, 3
SIRISALEE, P. (2005) 'Multi-criteria material selection in engineering design', PhD-thesis, Cambridge University Engineering Department
SMITH, J. and CLARKSON, P.J. (2005) 'Design concept modelling to improve reliability' in Journal of Engineering Design, 16 (5), 473-492
SMITH, J. and CLARKSON, P.J. (2005) 'A method for assessing the robustness of mechanical designs' in Journal of Engineering Design, 16 (5), 493-510
STARLING, A.C. and SHEA, K. (2005) 'A parallel grammar for simulation-driven mechanical Computational Design' in 2005 ASME International Design Engineering Technical Conferences (IDETC/CIE2005), Long Beach, California, USA,
STARLING, A.C. and SHEA, K. (2005) 'Virtual synthesisers for mechanical gear systems' in 15th International Conference on Engineering Design (ICED'05), Melbourne, Australia, 120-121
STRICKFADEN, M., LANGDON, P.M. and RODGERS, P. (2005) 'Cognitive aspects of scripting the design of accessible products' in 11th International Conference on Human Computer Interaction (HCII 2005), Las Vegas, Nevada, USA,
SYMONS, D.D., HUTCHINSON, R.G. and FLECK, N.A. (2005) 'Actuation of the kagome double layer grid. Part 1: Prediction of performance of the perfect structure' in Journal of the Mechanics and Physics of Solids, 53, 1855-1874
SYMONS, D.D., SHIEH, J. and FLECK, N.A. (2005) 'Actuation of the kagome double layer grid. Part 2: Effect of imperfections on the measured and predicted actuation stiffness' in Journal of the Mechanics and Physics of Solids, 53, 1875-1891
WALLACE, K.M. (2005) 'University Technology Partnership for Design, Cambridge' in Design process improvement - a review of current practice, 534-537
WALLACE, K.M. (2005) 'Educating engineers in design', The Royal Academy of Engineering
WALLACE, K.M., AHMED, S. and BRACEWELL, R.H. (2005) 'Engineering knowledge management' in Design process improvement - a review of current practice, 326-343
WITTNER, B. (2005) 'A systematic approach to alarm system design for medical devices', Cambridge University Engineering Department, First Year Report
WYNN, D.C. and CLARKSON, P.J. (2005) 'Models of designing' in Design process improvement - a review of current practice, 34-59
WYNN, D.C., CLARKSON, P.J. and ECKERT, C.M. (2005) 'A model-based approach to improve planning practice in collaborative aerospace design' in 2005 ASME International Design Engineering Technical Conferences (IDETC/CIE2005), Long Beach, California, USA, 5, 537-548
WYNN, D.C., ECKERT, C.M. and CLARKSON, P.J. (2005) 'Addressing uncertainty in design planning and modeling: a case study of complex aerospace design' in 17th International Conference on Design Theory and Methodology (DTM), Long Beach, California, USA,
WYNN, D.C., ECKERT, C.M. and CLARKSON, P.J. (2005) 'Abstracting complexity for design planning' in 2nd Workshop on Complexity in Design and Engineering, Glasgow, UK, 20-23
WYNN, D.C., ECKERT, C.M. and CLARKSON, P.J. (2005) 'Modelling and simulating iterative development processes' in 15th International Conference on Engineering Design (ICED'05), Melbourne, Australia, 64-65

2004

ADAMS, R. and LANGDON, P.M. (2004) 'Assessment, insight and awareness in user centred design that includes users with special needs' in Designing a more inclusive world, 49-58
AHMED, S. and WALLACE, K.M. (2004) 'Identifying and supporting the knowledge needs of novice designers within the aerospace industry' in Journal of Engineering Design, 15 (5), 475-492
AHMED, S. and WALLACE, K.M. (2004) 'Understanding the knowledge needs of novice designers in the aerospace industry' in Design Studies, 25 (2), 155-173
AHMED, S. and WALLACE, K.M. (2004) 'Reusing design knowledge' in 14th CIRP Design Seminar, Cairo,
ALBERS, A., OHMER, M. and ECKERT, C.M. (2004) 'Engineering design in a different way: cognitive perspective on the contact and channel model approach' in Visual and Spatial Reasoning, MIT, Cambridge, MA, USA,
ARIYO, O.O. (2004) 'Modelling change margins: identifying change propagation in complex products', Cambridge University Engineering Department, First Year Report
ARIYO, O.O., ECKERT, C.M. and CLARKSON, P.J. (2004) 'Tolerance margins as constraining factors of changes in complex products' in 5th Integrated Product Development Workshop (IPD 2004), Schonebeck/Bad Salzelmen b. Magdeburg, Germany, (CD-ROM)
AUGUST, E., ECKERT, C.M. and CLARKSON, P.J. (2004) 'Using design structure matrices in visualizing design' in Multidisciplinary approaches to visual representations and interpretations, 305-318
AURISICCHIO, M. and WALLACE, K.M. (2004) 'Information requests and consequent searches in aerospace design' in 8th International Design Conference (Design 2004), Dubrovnik, Croatia, 105-110
BALDOCK, R. (2004) 'Structural systems optimisation techniques for the building industry', Cambridge University Engineering Department, First Year Report
BALDOCK, R. and SHEA, K. (2004) 'Structural systems optimization techniques for the building industry' in Next Generation - Intelligent Systems in Engineering, the 11th International Workshop of the European Group for Intelligent Computing in Engineering (EG-ICE), Weimar, Germany, 199(4), 11-15
BELL, C.P. (2004) 'Using design space exploration to improve the conceptual design of turbine rotor blade cooling systems', Cambridge University Engineering Department, First Year Report
BELL, T. (2004) 'Preliminary design of aeroengines: An integrated approach for new objectives', Cambridge University Engineering Department, First Year Report
BOLOGNINI, F. (2004) 'Computational synthesis of microsystems', MPhil-thesis, Cambridge University Engineering Department
BRACEWELL, R.H., AHMED, S. and WALLACE, K.M. (2004) 'DRed and design folders: a way of capturing, storing and passing on - knowledge generated during design projects' in 2004 ASME International Design Engineering Technical Conferences (DETC'04), Salt Lake City, Utah, USA,
CARDOSO, C., KEATES, S. and CLARKSON, P.J. (2004) 'Comparing product assessment methods for inclusive design' in Designing a more inclusive world, 31-40
CHAKRABARTI, A., MORGENSTERN, S. and KNAAB, H. (2004) 'Identification and application of requirements and their impact on the design process: a protocol study' in Research in Engineering Design, 15 (1), 22 - 39
CLARKSON, P.J. and KEATES, S. (2004) 'Exclusion by design: an assessment of the accessibility of digital television set-top boxes' in 8th International Design Conference (Design 2004), Dubrovnik, Croatia, 989-994
CLARKSON, P.J., BUCKLE, P., COLEMAN, R., STUBBS, D., WARD, J.R., JARRETT, J., LANE, R. and BOUND, J. (2004) 'Design for patient safety: a review of the effectiveness of design in the UK health service' in Journal of Engineering Design, 15 (2), 123-140
CLARKSON, P.J., BUCKLE, P., COLEMAN, R., STUBBS, D., WARD, J.R., JARRETT, J., LANE, R. and BOUND, J. (2004) 'Design for patient safety: A scoping study to identify how the effective use of design could help to reduce medical accidents', Engineering Design Centre, University of Cambridge, UK, 0954524306
CLARKSON, P.J., BUCKLE, P., STUBBS, D., COLEMAN, R., WARD, J.R. and KENNEDY-MARTIN, M. (2004) 'Design for patient safety: a review of the effectiveness of design in the UK health service' in 8th International Design Conference (Design 2004), Dubrovnik, Croatia, 983-988
CLARKSON, P.J., SIMONS, C.S. and ECKERT, C.M. (2004) 'Predicting change propagation in complex design' in Transactions - American Society of Mechanical Engineers Journal of Mechanical Design, 126 (5), 788-797
CLARKSON, P.J., WARD, J.R., BUCKLE, P., STUBBS, D. and COLEMAN, R. (2004) 'Designing for patient safety: a review of the effectiveness of design in the UK health service' in 2004 ASME International Design Engineering Technical Conferences (DETC'04), Salt Lake City, Utah, USA, 3, 563-572
CLARKSON, P.J., WARD, J.R., BUCKLE, P., STUBBS, D. and COLEMAN, R. (2004) 'Designing for patient safety: A review of the effectiveness of design in the UK health service' in 7th Biennial ASME Conference Engineering Systems Design and Analysis (ESDA 2004), Manchester, UK, 3, 443-452
COLEMAN, R., CLARKSON, P.J. and KEATES, S. (2004) 'Inclusive design in practice - developing a new British standard' in Designing for the 21st Century III, Rio de Janeiro, Brazil,
COLEMAN, R., CLARKSON, P.J. and KEATES, S. (2004) 'Inclusive design in practice - developing a new British Standard' in Designing for the 21st Century III, Rio de Janeiro, Brazil,
COLEMAN, R., CLARKSON, P.J., WARD, J.R., BUCKLE, P. and STUBBS, D. (2004) 'Inclusive design in practice: designing for patient safety' in Designing for the 21st Century III, Rio de Janeiro, Brazil,
COLEMAN, R., LEBBON, C., CLARKSON, P.J., KEATES, S. and JOHNSTON, M. (2004) 'Inclusive design in practice - i~design: a research project into design tools information and guidance' in Designing for the 21st Century III, Rio de Janeiro, Brazil,
COLEMAN, R., LEBBON, C., CLARKSON, P.J., KEATES, S. and JOHNSTON, M. (2004) 'Inclusive design in practice - i~design: A research project into design tools information' in Designing for the 21st Century III, Rio de Janeiro, Brazil,
CRILLY, N., MOULTRIE, J. and CLARKSON, P.J. (2004) 'Seeing things: consumer response to the visual domain in product design' in Design Studies, 25 (6), 547-577
CRILLY, N., MOULTRIE, J. and CLARKSON, P.J. (2004) 'The role of designer-client communication in determining product appearance and consumer response' in Design Research Society International Conference Ä Futureground 2004, Monash University, Australia,
CRILLY, N., MOULTRIE, J. and CLARKSON, P.J. (2004) 'Understanding product appearance: cognitive and emotional response to product visual form' in 4th International Conference on Design and Emotion, Ankara, Turkey, (CD-ROM)
DEL-REY CHAMORRO, F.M. (2004) 'Understanding the process of retrieving information in aerospace design', PhD-thesis, Cambridge University Engineering Department
DEL-REY-CHAMORRO, F.M., WALLACE, K.M. and BRACEWELL, R.H. (2004) 'Rationale as a link between information and knowledge' in 8th International Design Conference (Design 2004), Dubrovnik, Croatia, 847-852
DONG, H. (2004) 'Barriers to inclusive design in the UK' in ACM Conference on Human Aspects in Computing Systems, CHI 2004 Doctoral Consortium, Vienna, Austria, 15-16
DONG, H. (2004) 'Barriers to inclusive design in the UK', PhD-thesis, Cambridge University Engineering Department
DONG, H., CLARKSON, P.J., AHMED, S. and KEATES, S. (2004) 'Investigating perceptions of manufacturers and retailers to inclusive design' in Design Journal, 7 (3), 3-15
DONG, H., CLARKSON, P.J. and KEATES, S. (2004) 'Requirements capture for inclusive design resources and tools' in 7th Biennial ASME Conference Engineering Systems Design and Analysis (ESDA 2004), Manchester, UK, 3, 27-36
DONG, H., CLARKSON, P.J. and KEATES, S. (2004) 'Industry perceptions to inclusive design - a comparative study' in 2004 ASME International Design Engineering Technical Conferences (DETC'04), Salt Lake City, Utah, USA, 3, 553-562
DONG, H., KEATES, S. and CLARKSON, P.J. (2004) 'Developing and evaluating a booklet for inclusive design' in Proceedings of the 2nd Cambridge Workshop on Universal Access and Assistive Technology (CWUAAT'04), CUED/C-EDC/TR129, 177-182
DONG, H., KEATES, S. and CLARKSON, P.J. (2004) 'Inclusive design in industry: barriers, drivers and the business case' in 8th European Research Consortium for Informatics and Mathematics Workshop (ERCIM) "User interfaces for all", Vienna,
DONG, H., KEATES, S., CLARKSON, P.J. and CASSIM, J. (2004) ''Discounted' user research for inclusive design' in The Home and Electronic Assistive Technology, HEAT 2004, King's Manor, University of York, UK,
EARL, C.F., ECKERT, C.M. and JOHNSON, J. (2004) 'Complexity models in design' in 8th International Design Conference (Design 2004), Dubrovnik, Croatia, 163-168
ECKERT, C.M. (2004) 'Status in industrial studies' in The role of empirical studies in understanding and supporting engineering design
ECKERT, C.M. and CLARKSON, P.J. (2004) 'If only I knew what you were going to do: communication and planning in large organizations' in Methods and tools for co-operative and integrated design, 375-384
ECKERT, C.M., BLACKWELL, A.F., BUCCIARELLI, L., CLARKSON, P.J., EARL, C.F., KNIGHT, T., MACMILLAN, S., STACEY, M.K. and WHITNEY, D. (2004) 'What designers think we need to know about their processes: early results from a comparative study' in 8th International Design Conference (Design 2004), Dubrovnik, Croatia, 995-1000
ECKERT, C.M., BLACKWELL, A.F., STACEY, M.K. and EARL, C.F. (2004) 'Sketching across design domains' in 3rd International Conference on Visual and Spatial Reasoning in Design (VR'04), MIT, Cambridge, MA, USA,
ECKERT, C.M., CLARKSON, P.J. and EARL, C.F. (2004) 'Past designs as a way of coping with complexity' in Coping with Complexity, Bath, UK,
ECKERT, C.M., CLARKSON, P.J. and ZANKER, W. (2004) 'Change and customisation in complex engineering domains' in Research in Engineering Design, 15 (1), 1-21
ECKERT, C.M., STACEY, M.K. and CLARKSON, P.J. (2004) 'The lure of the measurable in design research' in 8th International Design Conference (Design 2004), Dubrovnik, Croatia, 21-26
EISMA, R., DICKINSON, A., GOODMAN, J., SYME, A., TIWARI, L. and NEWELL, A.F. (2004) 'Early user involvement in the development of information technology-related products for older people' in Universal Access in the Information Society, 3 (2), 131-140
FEST, E., SHEA, K. and SMITH, I. (2004) 'Active tensegrity structure' in Journal of Structural Engineering, 130 (10), 1454-1465
FLANAGAN, T. and JNSCH, J.F.P. (2004) 'Models, methodology and finding focus: dealing with the challenges or PhD research' in 8th International Design Conference (Design 2004), Dubrovnik, Croatia, 297-302
GOURTOVAIA, M., SHEA, K. and BRACEWELL, R.H. (2004) 'Developing Intuitive and Interactive Software Demonstrators for Computational Design Methods' in Next Generation - Intelligent Systems in Engineering, the 11th International Workshop of the European Group for Intelligent Computing in Engineering (EG-ICE), Weimar, Germany, 199(4), 1-10
GRAY, P., GOODMAN, J. and MACLEOD, J. (2004) 'A lightweight experiment management system for handheld computers' in Computer-Aided Design of User Interfaces Conference (CADUI 2004), Funchal, Madeira Island, Portugal,
HWANG, F., KEATES, S., LANGDON, P.M. and CLARKSON, P.J. (2004) 'Movement time prediction for tasks assisted by force-feedback' in Designing a more inclusive world, 143-152
HWANG, F., LANGDON, P.M., CLARKSON, P.J. and KEATES, S. (2004) 'Mouse movements of motion-impaired users: A submovement analysis' in 6th International ACM SIGACCESS Conference on Computers and Accessibility (ASSETS 2004), Atlanta, GA, USA, 102-109
JAEGGI, D.M. (2004) 'Robust aerodynamic Computational Design', Cambridge University Engineering Department, First Year Report
JAEGGI, D.M., ASSELIN-MILLER, C.S., PARKS, G.T., KIPOUROS, T., BELL, T.A. and CLARKSON, P.J. (2004) 'Multi-objective parallel tabu search' in The 8th International Conference on Parallel Problem Solving from Nature (PPSN), Birmingham, UK, 3242, 732-741
JAPIKSE, R. (2004) 'Structuring and retrieving engineering design knowledge', PhD-thesis, Cambridge University Engineering Department
JAPIKSE, R., JAPIKSE, D. and PELTON, R. (2004) 'Evaluation of neural networks for meanline model development' in 10th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC-10), Honolulu, Hawaii,
JARRATT, T.A.W.A.W. (2004) 'A model-based approach to support the management of engineering change', PhD-thesis, Cambridge University Engineering Department
JARRATT, T.A.W., ECKERT, C.M. and CLARKSON, P.J. (2004) 'A classification of change processes' in Design Studies, (accepted)
JARRATT, T.A.W., ECKERT, C.M. and CLARKSON, P.J. (2004) 'The benefits of predicting change in complex products: application areas of a DSM-based prediction tool' in 8th International Design Conference (Design 2004), Dubrovnik, Croatia, 303-308
JARRATT, T.A.W., ECKERT, C.M. and CLARKSON, P.J. (2004) 'Development of a product model to support engineering change management' in 5th International Symposium on Tools and Methods of Competitive Engineering (TMCE 2004), Lausanne, Switzerland, 1, 331-342
JARRATT, T.A.W., ECKERT, C.M. and CLARKSON, P.J. (2004) 'Pitfalls of engineering change: change practice during complex product design' in 14th CIRP Design Seminar, Cairo, Egypt,
JARRATT, T.A.W., ECKERT, C.M., CLARKSON, P.J. and STACEY, M.K. (2004) 'Providing an overview during the design of complex products: the development of a product linkage modelling method' in 1st International Conference on Design Computing and Cognition (DCC'04), MIT, Cambridge, MA, USA, 239-258
JARRATT, T.A.W., KELLER, R., NAIR, S., ECKERT, C.M. and CLARKSON, P.J. (2004) 'Visualization techniques for product change and product modelling in complex design' in Diagrammatic Representation and Inference 2004, University of Cambridge, UK, 2980, 388-391
JARRATT, T., ECKERT, C.M. and CLARKSON, P.J. (2004) 'Engineering change: A review of the literature and an examination of the key topics', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR130
JARRETT, J.P., DAWES, W.N. and CLARKSON, P.J. (2004) 'An approach to integrated multi-disciplinary turbomachinery design' in ASME Turbo Expo 2004, Austria Center Vienna, 1651-1659 (CD-ROM)
JOHNSON, A.L. (2004) 'Plane and geodetic surveying', Spon Press, 0415320046
JUN, G.T. (2004) 'A model-based risk analysis framework for healthcare provision process', Cambridge University Engineering Department, First Year Report
KEATES, S. and CLARKSON, P.J. (2004) 'Assessing the accessibility of digital television set-top boxes' in Designing a more inclusive world, 183-192
KEATES, S., CLARKSON, P.J. and ROBINSON, P. (2004) 'Design for participation: providing access to e-information for older adults' in Universal Access in the Information Society, 3 (2), 149-163
KEATES, S., CLARKSON, P.J., LANGDON, P.M. and ROBINSON, P. (2004) 'Designing a more inclusive world', Springer Verlag (Spring)
KEATES, S., CLARKSON, P.J., LANGDON, P.M. and ROBINSON, P. (2004) 'Proceedings, 2nd Cambridge Workshop on Universal Access and Assistive Technology', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR129
KELLER, R. (2004) 'Visualising complex processes and products in engineering design', Cambridge University Engineering Department, First Year Report
KIM, S., BRACEWELL, R.H. and WALLACE, K.M. (2004) 'From discourse analysis to answering design questions' in International Workshop on the Application of Language and Semantic Technologies to support Knowledge Management Processes (EKAW 2004), Whittlebury Hall, Northamptonshire, UK, 43-49
KIPOUROS, T., PARKS, G.T. and SAVILL, M. (2004) 'Multi-objective aerodynamic design optimisation' in Design Optimization: Methods and Applications. International Conference and Advanced Course Program (ERCOFTAC), Athens, Greece, (CD-ROM. ERCODO2004_239)
LANGDON, P.M., KEATES, S. and CLARKSON, P.J. (2004) 'New cognitive capability scales for inclusive product design' in Designing a more inclusive world, 59-68
LEUNG, A.C.H., SYMONS, D.D. and GUEST, S.D. (2004) 'Actuation of the kagome lattice structures' in 45th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Palm Springs, California, USA,
LEWIS, T. (2004) 'Product architecture issues within inclusive design' in 7th Workshop on Product Structuring, Chalmers University of Technology,
LEWIS, T. (2004) 'Feasibility of customisation within the domestic product market', Cambridge University Engineering Department, First Year Report
MAIER, A.M. (2004) 'A communication audit for engineering design', Cambridge University Engineering Department, First Year Report
MAIER, A.M., ECKERT, C.M. and CLARKSON, P.J. (2004) 'A communication audit for engineering design' in 5th Integrated Product Development Workshop (IPD 2004), Schonebeck/Bad Salzelmen b. Magdeburg, Germany, (CD-ROM)
MOLINARI, M. (2004) 'Using 3D computational tools to improve blade design process', Cambridge University Engineering Department, First Year Report
MOULTRIE, J., PROBERT, D. and CLARKSON, P.J. (2004) 'Development of a design audit to encourage the adoption of 'good design' practices in SMEs: a product and process perspective' in EIASM 11th NPD Conference, Dublin, Irelend,
O'DONOVAN, B.D. (2004) 'Modelling and simulation of engineering design processes', PhD-Thesis, Cambridge University Engineering Department
O'DONOVAN, B.D., ECKERT, C.M. and CLARKSON, P.J. (2004) 'Simulating design processes to increase managers' understanding' in 8th International Conference on Design (Design 2004), Dubrovnik, Croatia, 447-452
O'DONOVAN, B.D., ECKERT, C.M. and CLARKSON, P.J. (2004) 'Simulating design processes to assist in design process planning' in 2004 ASME International Design Engineering Technical Conferences (DETC'04), Salt Lake City, Utah, USA, 3, 503-512
PERSAD, U. (2004) 'User characterisation for inclusive design', Cambridge University Engineering Department, First Year Report
SEE, H.J., WILSON, D.I., VASSILIADIS, V.S. and PARKS, G.T. (2004) 'Design of reverse osmosis (RO) water treatment networks subject to fouling' in Water Science and Technology, 49 (2), 263-270
SHEA, K. (2004) 'Directed randomness' in Digital tectonics, 10-23
SHEA, K. (2004) 'Explorations in using an aperiodic spatial tiling as a design generator' in 1st International Conference on Design Computing and Cognition 2004 (DCC'04), MIT, Cambridge, MA, USA, 137-258 (Awarded as the Best Paper)
SHEA, K., AISH, R. and GOURTOVAIA, M. (2004) 'Towards integrated performance-driven generative design tools' in Automation in Construction, 14 (2), 253-264
SHEA, K. and ZHAO, X. (2004) 'A novel noon Mark Cantilever support: from design generation to realization' in Shell and Spatial Sturctures from Models to Realization (IASS 2004), Montpellier, France, (presented)
SIRISALEE, P., ASHBY, M.F., PARKS, G.T. and CLARKSON, P.J. (2004) 'Multi-criteria material selection in engineering design' in Advanced Engineering Materials, 6 (1-2), 84-92
SIRISALEE, P., PARKS, G.T., ASHBY, M.F. and CLARKSON, P.J. (2004) 'Multi-material selection: material selection for sandwich beams' in 2004 ASME International Design Engineering Technical Conferences (DETC'04), Salt Lake City, USA, 3, 31-40
STARLING, A. (2004) 'Performance-based computational synthesis of parametric mechanical systems', PhD-thesis, Cambridge University Engineering Department
STOUFFS, R., KRISHNAMURTI, R., JARRATT, T.A.W., ECKERT, C.M., CLARKSON, P.J. and STACEY, M.K. (2004) 'Representation in design' in 1st International Conference on Design Computing and Cognition (DCC'04), MIT, Cambridge, MA, USA,
STOUFFS, R., KRISHNAMURTI, R., JARRATT, T.A.W., ECKERT, C.M., CLARKSON, P.J., STACEY, M.K., TURNER, A., MOTTRAM, C. and PENN, A. (2004) 'Data views, data recognition, design queries and design rules' in 1st International Conference on Design Computing and Cognition (DCC'04), MIT, Cambridge, MA, USA,
SUPPAPITNARM, A., PARKS, G.T., SHEA, K. and CLARKSON, P.J. (2004) 'Conceptual design of bicycle frames by multiobjective shape annealing' in Engineering Optimization, 36 (2), 165-188
SYMONS, D.D. (2004) 'Inertial liquid loading in a needle-free injection device' in Proceedings - Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 218, 233-240
WARD, J.R. and CLARKSON, P.J. (2004) 'An analysis of medical device-related errors: prevalence and possible solutions' in Journal of Medical Engineering and Technology, 28 (1), 2-21
WARD, J.R., CLARKSON, P.J. and BUCKLE, P. (2004) 'The packaging and labelling of solid oral medicines: a study to identify the needs and functionality for safe administration of solid oral medicines using oral Methotrexate as an example', University of Cambridge Engineering Design Centre / National Patient Safety Agency, Internal report
WARD, J.R., CLARKSON, P.J., BUCKLE, P. and COLEMAN, R. (2004) 'Design for patient safety: current NHS activities in meeting the DPS approach', University of Cambridge, Internal report
WARD, J.R., CLARKSON, P.J., BUCKLE, P. and HARRIS, W. (2004) 'The packaging and labelling of solid oral medicine using oral Methotrexate as an example' in 7th Biennial ASME Conference Engineering Systems Design and Analysis (ESDA 2004), Manchester, UK, 3, 459-468
WOON, S.Y., QUERIN, O.M., PARKS, G.T. and SIENZ (2004) 'Integrating manufacturing design and structural optimization - a way forward' in 5th ASMO UK/ISSMO Conference on Engineering Design Optimization, Stratford upon Avon, UK, (CD-ROM)
WOON, S.Y., TONG, L.Y., QUERIN, O.M. and STEVEN, G.P. (2004) 'Effective optimisation of continuum topologies through a multi-GA system' in Computer Methods in Applied Mechanics and Engineering, 194 (30-33), 3416-3437
YAO, N. (2004) 'Cost-based structural optimisation', Cambridge University Engineering Department, First Year Report
ZHAO, C. and SHEA, K. (2004) 'Performance-based structural synthesis of spatial truss systems' in 2nd International Conference of Steel and Composite Structures (ICSCS'04), Seoul, Korea,
ZHAO, X. and SHEA, K. (2004) 'Computational Synthesis of Three-dimensional Discrete Structures' in 8th International Symposium on Structural Engineering for Young Experts, Xi'an, China, 42-49

2003

ADAMS, R. and LANGDON, P.M. (2003) 'SIMPLEX: a simple user check-model for inclusive design' in 2nd Universal Access in HCI (UAHCI), Crete, Greece, 4, 13-17
ADAMS, R. and LANGDON, P.M. (2003) 'Principles and concepts for information and communications technology design' in Journal of Visual Impairment And Blindness, 97 (10), 602-612
ADAMS, R., WHITNEY, G. and LANGDON, P.M. (2003) 'Universal access heuristics for blind and visually impaired people who use ICT' in 2nd Universal Access in HCI (UAHCI), Crete, Greece, 4, 18-22
AHMED, S. (2003) 'Indexing knowledge', UK, GB0302640.8, 6 February 2003 Application filed
AHMED, S. and WALLACE, K.M. (2003) 'Evaluating a functional basis' in 2003 ASME International Design Engineering Technical Conferences (DETC'03), Chicago, Illinois, USA,
AHMED, S. and WALLACE, K.M. (2003) 'Indexing design knowledge based upon descriptions of design processes' in 14th International Conference on Engineering Design (ICED'03), Stockholm, Sweden, 691-692
AHMED, S., DONG, H. and CLARKSON, P.J. (2003) 'Understanding issues facing one-handed users' in International Conference on Inclusive Design and Communications (INCLUDE 2003), The Royal College of Art, London, UK, 10:402-10:405
AHMED, S., WALLACE, K.M. and BLESSING, L.T.M. (2003) 'Understanding the differences between how novice and experienced designers approach design tasks' in Research in Engineering Design, 14 (1), 1-11 (0934-9839)
AURISICCHIO, M., BRACEWELL, R.H. and WALLACE, K.M. (2003) 'A design data model to support rationale capture and functional synthesis' in 2003 ASME International Design Engineering Technical Conferences (DETC'03), Chicago, Illinois, USA, DETC2003/DTM-48672
AURISICCHIO, M., LANGDON, P.M., AHMED, S. and WALLACE, K.M. (2003) 'Investigating knowledge searches in aerospace design' in 14th International Conference on Engineering Design (ICED'03), Stockholm, Sweden, 293-294
BOLOGNINI, F. (2003) 'The performance aspects of mechanical Computational Design', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR125
BRACEWELL, R.H. (2003) 'A method and tool for increasing the efficiency of a design process', UK, GB0319170.7, 15 August 2003 application filed
BRACEWELL, R.H. and WALLACE, K.M. (2003) 'A tool for capturing design rationale' in 14th International Conference on Engineering Design (ICED'03), Stockholm, Sweden, 185-186
BUCKLE, P., CLARKSON, P.J., COLEMAN, R., KENNEDY-MARTIN, M., LANE, R., STUBBS, D. and WARD, J.R. (2003) 'Designing for patient safety : how the effective use of design could help to reduce medical accidents' in XV Triennial Congress of the International Ergonomics Association and the 7th Joint Conference of Ergonomics Society of Korea /Japan Ergonomics Society, Seoul, Korea, 5,
BUCKLE, P., CLARKSON, P.J., COLEMAN, R., LANE, R., STUBBS, D., WARD, J.R., JARRETT, J. and BOUND, J. (2003) 'Design for patient safety: a system-wide design-led approach to tackling patient safety in the NHS', Department of Health Publications, London, 1841827657
CALDWELL, N.H.M., BRETON, B.C., HOLBURN, D.M. and YOUNG, T.C.W. (2003) 'Particle analysis using neural networks and image processing in the SEM' in Microscopy and Microanalysis, 9 (2), 738-739
CARDOSO, C., KEATES, S. and CLARKSON, P.J. (2003) 'Identifying design exclusion: a review of assessment methods' in International Conference on Inclusive Design and Communications (INCLUDE 2003), The Royal College of Art, London, UK, 10:410-10:415
CARDOSO, C., KEATES, S. and CLARKSON, P.J. (2003) 'Assessment for inclusive design' in Inclusive design: design for the whole population, 458-474
CARDOSO, C., KEATES, S. and CLARKSON, P.J. (2003) 'Assessing inclusivity throughout the design process' in 14th International Conference on Engineering Design (ICED'03), Stockholm, Sweden, 45-46
CASSIM, J. and DONG, H. (2003) 'Critical users in design innovation' in Inclusive design: design for the whole population, 532-553
CLARKSON, P.J. and KEATES, S. (2003) 'Digital television for all. A report on usability and accessible design. Appendix E - investigating the inclusivity of digital television set-top receivers', DTI
CLARKSON, P.J. and KEATES, S. (2003) 'A framework for minimising design exclusion' in International Conference on Inclusive Design and Communications (INCLUDE 2003), The Royal College of Art, London, UK, 10:390-10:395
CLARKSON, P.J. and KEATES, S. (2003) 'User capabilities and product demands' in International Conference on Inclusive Design and Communications (INCLUDE 2003), The Royal College of Art, London, UK, 10:384-10:389
CLARKSON, P.J. and KEATES, S. (2003) 'Inclusive design - a balance between product demands and user capabilities' in 2003 ASME International Design Engineering Technical Conferences (DETC'03), Chicago, Illinois, USA, 575-584
CLARKSON, P.J., BUCKLE, P., STUBBS, D., COLEMAN, R. and KENNEDY-MARTIN, M. (2003) 'Designing for patient safety: A review of the effectiveness of design in the UK health service' in 14th International Conference on Engineering Design (ICED'03), Stockholm, Sweden,
CLARKSON, P.J., COLEMAN, R., KEATES, S. and LEBBON, C. (2003) 'Inclusive design: design for the whole population', Springer Verlag
CLARKSON, P.J., DONG, H. and KEATES, S. (2003) 'Quantifying design exclusion' in Inclusive design: design for the whole population, 423-437
CLARKSON, P.J., DONG, H. and KEATES, S. (2003) 'Visualising design exclusion' in 14th International Conference on Engineering Design (ICED'03), Stockholm, Sweden, 655-656
CLARKSON, P.J., DONG, H. and KEATES, S. (2003) 'Adaptation of a disability severity scale for product assessment' in 14th International Conference on Engineering Design (ICED'03), Stockholm, Sweden, 659-660
CLARKSON, P.J., DONG, H. and KEATES, S. (2003) 'The prevalence of functional impairments in Great Britain' in Inclusive design: design for the whole population, 360-371
CRILLY, N. (2003) 'The influence of product appearance in determining product desirability', Cambridge University Engineering Department, First Year Report
CROWDER, R., BRACEWELL, R.H., HUGHES, G., KERR, M., KNOTT, D., MOSS, M., CLEGG, C., HALL, W., WALLACE, K.M. and WATERSON, P. (2003) 'A future vision for the engineering design environment: a future sociotechnical scenario' in 14th International Conference on Engineering Design (ICED'03), Stockholm, Sweden, 249-250
DAWES, W.N., KELLAR, W.P., HARVEY, S.A., DHANASEKARAN, P.C., SAVILL, A.M. and CANT, R.S. (2003) 'Managing the geometry is limiting the ability of CFD to manage the flow' in 33rd AIAA Fluid Dynamics Conference, Orlando, Florida, USA,
DEL-REY-CHAMORRO, F.M. and WALLACE, K.M. (2003) 'A study of information retrieval in the aerospace domain' in 14th International Conference on Engineering Design (ICED'03), Stockholm, Sweden, 271-272
DEL-REY-CHAMORRO, F.M., ROY, R., VAN WEGEN, B. and STEELE, A. (2003) 'A framework to create key performance indicators for Knowledge Management solutions' in Journal of Knowledge Management, May 7 (2), 46-62
DODD, J., STEVENS, R. and LANGDON, P.M. (2003) 'Usability and accessibility investigation of e-banking registration processes' in 2nd Universal Access in HCI (UAHCI), Crete, Greece, 4, 58-62
DOMER, B., RAPHAEL, B., SHEA, K. and SMITH, I. (2003) 'A study of two stochastic search methods for structural control' in Journal of Computing in Civil Engineering, 194 (4), 515-526 (Best paper award for the journal in 2003)
DONG, H. (2003) 'Inclusive design primer', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR128
DONG, H., KEATES, S. and CLARKSON, P.J. (2003) 'Designers and manufacturers' perspectives on inclusive/universal design' in 14th International Conference on Engineering Design (ICED'03), Stockholm, Sweden, 511-512
DONG, H., KEATES, S. and CLARKSON, P.J. (2003) 'Inclusive design in industry: motivations and barriers' in ACM SIGCAPH Computers and the Physically Handicapped, Newsletter 75, 9-10
DONG, H., KEATES, S. and CLARKSON, P.J. (2003) 'UK and US industrial perspectives on inclusive design' in International Conference on Inclusive Design and Communications (INCLUDE 2003), The Royal College of Art, London, UK, 10:406-10:409
ECKERT, C.M. and BOUJUT, J-F. (2003) 'The role of objects in design co-operation: communication through physical or virtual objects' in Computer Supported Cooperative Work, 12 (2), 145-151
ECKERT, C.M. and CLARKSON, P.J. (2003) 'The reality of design process planning' in 14th International Conference on Engineering Design (ICED'03), Stockholm, Sweden, 91-92
ECKERT, C.M. and STACEY, M.K. (2003) 'Sources of inspiration in industrial practice: the case of knitwear design' in Journal of Design Research, 3 (http://jdr.tudelft.nl/)
ECKERT, C.M. and STACEY, M.K. (2003) 'Knitwear customisation as repeated redesign' in 2nd Interdisciplinary World Congress on Mass Customization and Personalization (MCPC'03), Technical University of Munich, Germany,
ECKERT, C.M. and STACEY, M.K. (2003) 'Adaptation of sources of inspiration in knitwear design' in Creativity Research Journal, 15 (4), 355-384
ECKERT, C.M., CLARKSON, P.J. and STACEY, M.K. (2003) 'The spiral of applied research: a methodological view on integrated design research' in 14th International Conference on Engineering Design (ICED'03), Stockholm, Sweden, 245-246
ECKERT, C.M., EARL, C.F., STACEY, M.K. and O'DONOVAN, B.D. (2003) 'Understanding communication: insights from comparative design studies', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR122
ECKERT, C.M., PULM, U. and JARRATT, T.A.W. (2003) 'Mass customisation, change and inspiration - Changing designs to meet new needs' in 14th International Conference on Engineering Design (ICED'03), Stockholm, Sweden, 113-114
ECKERT, C.M., STACEY, M.K. and EARL, C.F. (2003) 'Ambiguity is a double-edged sword: similarity references in communication' in 14th International Conference on Engineering Design (ICED'03), Stockholm, Sweden, 615-616
EGER, T., ECKERT, C.M. and CLARKSON, P.J. (2003) 'Towards a change process planning tool' in 14th International Conference on Engineering Design (ICED'03), Stockholm, Sweden, 543-544
EVANS, A.G., HUTCHINSON, J.W. and SYMONS, D.D. (2003) 'High authority shape morphing truss structures' in DARPA Synthetic Multifunctional Materials 2003 PI Meeting, Jackson Hole, WY, USA,
FEST, E., SHEA, K., DOMER, B. and SMITH, I. (2003) 'Adjustable tensegrity structures' in Journal of Structural Engineering, 129 (4), 515-526
FLANAGAN, T. (2003) 'Communication support from design process and product connectivity models', Cambridge University Engineering Department, First Year Report
FLANAGAN, T., ECKERT, C.M. and CLARKSON, P.J. (2003) 'Parameter trails' in 14th International Conference on Engineering Design (ICED'03), Stockholm, Sweden, 71-73
FLANAGAN, T., ECKERT, C.M., EGER, T., SMITH, J. and CLARKSON, P.J. (2003) 'A functional analysis of change propagation' in 14th International Conference on Engineering Design (ICED'03), Stockholm, Sweden, 441-442
FLECK, N.A., TAGARIELLI, V., RADFORD, D. and SYMONS, D.D. (2003) 'Dynamic loading of composite sandwich beams' in ASME International Mechanical Engineering Congress, Washington DC, USA,
GUPTA, S.P., KEATES, S. and CLARKSON, P.J. (2003) 'Usability considerations in the design of handheld electronic devices' in 14th International Conference on Engineering Design (ICED'03), Stockholm, Sweden, 117-118
HWANG, F. (2003) 'Partitioning cursor movements in "Point and Click" tasks' in In extended abstracts of CHI 2003, Fort Lauderdale, FL, USA, 682-683
HWANG, F., KEATES, S., LANGDON, P.M. and CLARKSON, P.J. (2003) 'Gravity well visibility in haptic interfaces for motion-impaired users' in 25th Annual International Conference of the IEEE EMBS, Cancun, Mexico, 2, 1670-1673
HWANG, F., KEATES, S., LANGDON, P.M. and CLARKSON, P.J. (2003) 'Multiple haptic targets for motion-impaired users' in Conference on Human Factors in Computing Systems (CHI 2003), Fort Lauderdale, FL, USA, 41-48
HWANG, F., LANGDON, P.M., KEATES, S. and CLARKSON, P.J. (2003) 'The effects of multiple haptic distractors on the performance of motion-impaired users' in Eurohaptics 2003, Trinity College, Dublin, Ireland, 14-25
JAPIKSE, R., LANGDON, P.M. and WALLACE, K.M. (2003) 'Structuring engineering design information using a model of how engineers' intuitively structure design information' in 14th International Conference on Engineering Design (ICED'03), Stockholm, Sweden, 433-434
JARRATT, T.A.W. and ECKERT, C.M. (2003) 'A taxonomy of change', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR123
JARRATT, T.A.W., ECKERT, C.M. and CLARKSON, P.J. (2003) 'Linkage analysis', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR124
JARRATT, T.A.W., ECKERT, C.M., WEEKS, R. and CLARKSON, P.J. (2003) 'Environmental legislation as a driver of design' in 14th International Conference on Engineering Design (ICED'03), Stockholm, Sweden, 231-232
KEATES, S. and CLARKSON, P.J. (2003) 'Design exclusion' in Inclusive design: design for the whole population, 88-102
KEATES, S. and CLARKSON, P.J. (2003) 'Countering design exclusion: bridging the gap between usability and accessibility' in Universal Access in the Information Society, 2, 215-225
KEATES, S. and CLARKSON, P.J. (2003) 'Countering design exclusion: an introduction to inclusive design', Springer, 1852336994
KEATES, S. and CLARKSON, P.J. (2003) 'Countering design exclusion' in Inclusive design: design for the whole population, 438-474
KEATES, S. and CLARKSON, P.J. (2003) 'Countering design exclusion through inclusive design' in 4th ACM Conference on Universal Usability (CUU 2003), Vancouver, BC, Canada, 69-76
KEATES, S. and CLARKSON, P.J. (2003) 'Supporting the adoption of inclusive design practices' in International Conference on Inclusive Design and Communications (INCLUDE 2003), The Royal College of Art, London, UK, 10:396-10:401
KEATES, S., CLARKSON, P.J. and ROBINSON, P. (2003) 'The design of kiosks for providing access to e-information for older adults' in 2nd Universal Access in HCI (UAHCI), Crete, Greece, 852-856
KENNISH, Y.C. (2003) 'Development and modelling of a new laser welding process for polymers', PhD-thesis, Cambridge University Engineering Department
KHAN, A. and WALLACE, K.M. (2003) 'Engineering science to engineering design' in 14th International Conference on Engineering Design (ICED'03), Stockholm, Sweden, 487-488
KHAN, Z.A. (2003) 'Engineering science to engineering design', MPhil-thesis, Cambridge University Engineering Department
LANGDON, P.M., ADAMS, R. and CLARKSON, P.J. (2003) 'Cognitive capability scales for design for participation' in 2nd Universal Access in HCI (UAHCI), Crete, Greece, 4, 113-117
LANGDON, P.M. and ADAMS, R. (2003) 'Selecting the practice research methods for HCI: beyond fashion statements', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR127
LANGDON, P.M., AURISICCHIO, M., CLARKSON, P.J. and WALLACE, K.M. (2003) 'An integrated ethnographic and empirical methodology in a study of knowledge searches in aerospace design' in 14th International Conference on Engineering Design (ICED'03), Stockholm, Sweden, 591-592
LANGDON, P.M., JAPIKSE, R., CLARKSON, P.J. and WALLACE, K.M. (2003) 'The effectiveness of psychological distance in an empirical study of guideline clustering for aerospace design' in 14th International Conference on Engineering Design (ICED'03), Stockholm, Sweden, 589-590
LANGDON, P.M., KEATES, S. and CLARKSON, P.J. (2003) 'Developing cognitive capability scales for inclusive product design' in 14th International Conference on Engineering Design (ICED'03), Stockholm, Sweden, 111-112
LI, J-P., BALAZS, M.E., PARKS, G.T. and CLARKSON, P.J. (2003) 'Erratum: A species conserving genetic algorithm for multimodal function optimization' in Evolutionary Computation, 11 (1), 107-109
MATTHEWS, P.C. (2003) 'Identifying design micro-models using genetic programming techniques: a user manual for the GP-HEM toolbox', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR126
MATTHEWS, P.C. and LOWE, D. (2003) 'Inducing change propagation models using previous designs' in 14th International Conference on Engineering Design (ICED'03), Stockholm, Sweden, 443-444
MATTHEWS, P.C. and WALLACE, K.M. (2003) 'Using self organizing maps as a design exploration tools' in 14th International Conference on Engineering Design (ICED'03), Stockholm, Sweden, 597-598
O'DONOVAN, B.D., CLARKSON, P.J. and ECKERT, C.M. (2003) 'The simulated design process' in 14th International Conference on Engineering Design (ICED'03), Stockholm, Sweden, 337-338
O'DONOVAN, B.D., CLARKSON, P.J. and ECKERT, C.M. (2003) 'Signposting: modelling uncertainty in design processes' in 14th International Conference on Engineering Design (ICED'03), Stockholm, Sweden, 335-334
SHEA, K. (2003) 'Digital canopy: high-end computation/low-tech construction' in Architectural Research Quarterly, 6 (3), 230-245
SHEA, K., AISH, R. and GOURTOVAIA, M. (2003) 'Towards integrated performance-based generative design tools' in 21st Conference on Education in Computer Aided Architectural Design in Europe (eCAADe 03), Graz University of Technology, Austria, 553-560
SHEA, K. and STARLING, A.C. (2003) 'From discrete structures to mechanical systems: a framework for creating performance-based parametric synthesis Tools' in AAAI'03 Spring Symposium 'Computational Synthesis', Stanford, CA, USA, 210-217
SIM, S.K., CLARKSON, P.J. and WYNN, D.C. (2003) 'Using design process tools to assist in the analysis of a protocol recording' in 14th International Conference on Engineering Design (ICED'03), Stockholm, Sweden, 669-670
SIRISALEE, P., PARKS, G.T., CLARKSON, P.J. and ASHBY, M.F. (2003) 'A new approach to multi-criteria material selection in engineering design' in 14th International Conference on Engineering Design (ICED'03), Stockholm, Sweden, 451-452
STACEY, M.K. and ECKERT, C.M. (2003) 'Against Ambiguity' in Computer Supported Cooperative Work, 12 (2), 153-183 ( 0925-9724)
STACEY, M.K., EARL, C.F., ECKERT, C.M. and O'DONOVAN, B.D. (2003) 'A methodology for comparing design processes' in 14th International Conference on Engineering Design (ICED'03), Stockholm, Sweden, 675-676
STARLING, A.C. and SHEA, K. (2003) 'A grammatical approach to computational generation of mechanical clock designs' in 14th International Conference on Engineering Design (ICED'03), Stockholm, Sweden, 183-184
STUBBS, D., BUCKLE, P., LANE, R., CLARKSON, P.J., COLEMAN, R., KENNEDY-MARTIN, M. and WARD, J.R. (2003) 'Equipment design and medical errors: the experience of nurses' in XVTriennial Congress of the International Ergonomics Association and the 7th Joint Conference of Ergonomics Society of Korea /Japan Ergonomics Society, Seoul, Korea, 5, 347-352
VALE, C.A.W. and SHEA, K. (2003) 'A machine learning-based approach to accelerating computational Computational Design' in 14th International Conference on Engineering Design (ICED'03), Stockholm, Sweden, 183-184
VALE, C.A.W. and SHEA, K. (2003) 'Learning intelligent modification strategies in Computational Design' in AAAI Spring Symposium: Computational Synthesis: from Basic Building Blocks to High Level Functionality, Palo Alto, CA, USA, 247-254
WALLACE, K.M. and AHMED, S. (2003) 'How engineering designers obtain information' in Human behaviour in design. Individuals, teams, tools, 184-194
WARD, J.R. and CLARKSON, P.J. (2003) 'Medical device-related errors in the UK and USA', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR120
WARD, J.R. and CLARKSON, P.J. (2003) 'Reducing medical device-related errors through human factors engineering', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR121
WARD, J.R., SHEFELBINE, S. and CLARKSON, P.J. (2003) 'Requirements capture for medical device design' in 14th International Conference on Engineering Design (ICED'03), Stockholm, Sweden, 65-66
WILDMAN, A.J. and PARKS, G.T. (2003) 'A comparative study of selective breeding strategies in a multiobjective genetic algorithm' in 2nd International Conference on Evolutionary Multi-Criterion Optimization (EMO2003), Algarve, Portugal, 418-432
WOON, S.Y., TONG, L., QUERIN, O.M. and STEVEN, G.P. (2003) 'Optimising topologies through a multi-GA system' in 5th World Congress of Structural and Multidisciplinary Optimization, Venice, Italy, (CD-Rom)
WYNN, D.C. (2003) 'Capturing complex design processes', Cambridge University Engineering Department, First Year Report
WYNN, D.C., ECKERT, C.M. and CLARKSON, P.J. (2003) 'Planning business processes in product development organisations' in Workshop on Requirements Engineering for Business Process Support (REBPS'03), Klagenfurt/Velden, Austria, 383-387

2002

ADAMS, R., LANGDON, P.M. and CLARKSON, P.J. (2002) 'A systematic basis for developing cognitive assessment methods for assistive technology' in Universal access and assistive technology, 53-62
AHMED, S. and HANSEN, C.T. (2002) 'A decision-making model for engineering designers' in Engineering Design Conference (EDC 2002), King's College, London, UK, 1, 217-228
AHMED, S. and WALLACE, K.M. (2002) 'Issues of carrying out empirical research in industry' in Engineering Design Conference (EDC 2002), King's College, London, UK, 1, 627-636
ALEXANDER, K.L. and CLARKSON, P.J. (2002) 'A validation model for the medical devices industry' in Journal of Engineering Design, 13 (3), 197-204
ANGELINI, M., LANGDON, P.M. and BRACEWELL, R.H. (2002) 'Modelling, simulation and design of mechatronic systems for force-feedback', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR119
ASHBY, M. and JOHNSON, K. (2002) 'Materials and design. The art and science of material selection in product design', Butterworth-Heinemann, 0750655542
ASHBY, M.F. (2002) 'Material and shape', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR116
BALAZS, M.E., PARKS, G.T. and CLARKSON, P.J. (2002) 'Optimisation in industry - what does industry really need?' in Optimisation in Industry, 1, 15-24
BRACEWELL, R.H. (2002) 'Synthesis based on function - means trees: schemebuilder' in Engineering computational design: Understanding, approaches and tools, 199-212
CALDWELL, N.H.M., BRETON, B.C. and HOLBURN, D.M. (2002) 'Web-based expert systems: information clients versus knowledge servers' in Intelligent exploration of the Web, 404-419
CALDWELL, N.H.M., BRETON, B.C., HOLBURN, D.M. and ROBERTSON, R.P. (2002) 'VSEM: from technology demonstrator towards integrated educational tool' in Microscopy and Microanalysis, 8 (2), 1566-67
CARDOSO, C., KEATES, S. and CLARKSON, P.J. (2002) 'Assessing interface inclusivity throughout the design process' in 7th European Research Consortium for Informatics and Mathematics Workshop (ERCIM) "User interfaces for all", Paris (Chantilly), France, 21-36
CARDOSO, C., KEATES, S. and CLARKSON, P.J. (2002) 'Design for inclusivity - assessing the accessibility of everyday products' in 1st Cambridge Workshop on Universal Access and Assistive Technology (CWUAAT'02), Trinity Hall, Cambridge, UK, 1, 47-51
CHAKRABARTI, A. (2002) 'Engineering Computational Design: understanding, approaches and tools', Springer Verlag (1-356)
CHAKRABARTI, A., LANGDON, P.M., LIU, YIENG-CHIEH and BLIGH, T.P. (2002) 'An approach to compositional synthesis of mechanical design concepts using computers' in Engineering Computational Design: understanding, approaches and tools, 179-194
CLARKSON, P.J. and KEATES, S. (2002) 'Quantifying design exclusion' in Universal access and assistive technology, 23-32
CLARKSON, P.J., KEATES, S. and LANGDON, P.M. (2002) 'Minimising exclusion by design' in Engineering Design Conference (EDC 2002), King's College, London, UK, 1, 507-516
CLARKSON, P.J., KEATES, S., DONG, H. and LANGDON, P.M. (2002) 'Understanding the range of user capabilities' in Engineering Design Conference (EDC 2002), King's College, London, UK, 1, 303-312
DONG, H. (2002) 'Countering design exclusion', Cambridge University Engineering Department, First Year Report
DONG, H., CARDOSO, C., CASSIM, J., KEATES, S. and CLARKSON, P.J. (2002) 'Inclusive design: Reflections on design practice', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR118
DONG, H., KEATES, S. and CLARKSON, P.J. (2002) 'Accommodating older users' functional capabilities' in Workshop on "A new research agenda for older adults", BCS HCI2002, South Bank University, London, UK, 10-11
DONG, H., KEATES, S. and CLARKSON, P.J. (2002) 'Inclusive design diagnosis based on the ONS scales' in 1st Cambridge Workshop on Universal Access and Assistive Technology (CWUAAT'02), Trinity Hall, Cambridge, CUED/C-EDC/TR118, 71-77
DONG, H., KEATES, S., CLARKSON, P.J. and CASSIM, J. (2002) 'Implementing inclusive design: the discrepancy between theory and practice' in 7th European Research Consortium for Informatics and Mathematics Workshop (ERCIM) "User interfaces for all", Paris (Chantilly), France, 173-185
DONG, H., KEATES, S., CLARKSON, P.J. and CASSIM, J. (2002) 'Implementing inclusive design: the discrepancy between theory and practice' in Universal access, theoretical perspectives, practice and experience, 106-117
EARL, C.F. and ECKERT, C.M. (2002) 'The structure of similarity in design' in Engineering Design Conference (EDC 2002), King's College, London, UK, 1, 527-536
ECKERT, C.M. and CLARKSON, P.J. (2002) 'Connectivity as a key to supporting design' in 7th International Conference on Artificial Intelligence in Design (AID'02), Cambridge University Engineering Department, UK, 1, 479-501
ECKERT, C.M. and CLARKSON, P.J. (2002) 'Planning design processes in industry-initial observations' in Engineering Design Conference (EDC 2002), King's College, London, UK, 1, 637-646
ECKERT, C.M. and EARL, C.F. (2002) 'Perspectives on similarity in design' in Design 2002 - 7th International Design Conferenace, Cavtat-Dubrovnik, Croatia, 1, 131-136
EGER, T. (2002) 'Planning Change Processes', Cambridge University Engineering Department, First Year Report
GUPTA, S.P. (2002) 'Usability of handheld electronic devices', MPhil-thesis, Cambridge University Engineering Department
HANSEN, C.T. and AHMED, S. (2002) 'An analysis of design decision-making in industrial practice' in 7th International Design Conference (Design 2002), Dubrovnik, Croatia, 1, 145-150
HILTON, P.A., JONES, I.A. and KENNISH, Y.C. (2002) 'Transmission laser welding of plastics' in International Congress on Laser Advanced Materials Processing (LAMP 2002), Osaka, Japan,
HWANG, F. (2002) 'A study of cursor trajectories of motion-impaired users' in ACM CHI 2002, Extended Abstracts, Minneapolis, Minnesota, USA, 842-843
HWANG, F., KEATES, S., LANGDON, P.M. and CLARKSON, P.J. (2002) 'Assistive haptic interfaces for motion-impaired users' in IEEE EMBS UK and RI Postgraduate Conference on Biomedical Engineering and Medical Physics, University of Aston, Birmingham, UK, 8
HWANG, F., KEATES, S., LANGDON, P.M. and CLARKSON, P.J. (2002) 'Using cursor measures to determine appropriate computer input assistance for motion-impaired users' in 24th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, Houston, Texas, USA, 2437-2438
HWANG, F., LANGDON, P.M., KEATES, S., CLARKSON, P.J. and ROBINSON, P. (2002) 'Cursor characterisation and haptic interfaces for motion-impaired users' in Universal access and assistive technology, 87-96
JAPIKSE, R. (2002) 'Guideline for knowledge retention and reuse', Cambridge University Engineering Department, First Year Report
JARRATT, T.A.W., CLARKSON, P.J., PARKS, G.T. and ECKERT, C.M. (2002) 'Use of Monte Carlo Methods in the prediction of change propagation' in Engineering Design Conference 2002 (EDC 2002), King's College, London, UK, 1, 487-498
JARRATT, T.A.W., ECKERT, C.M., CLARKSON, P.J. and SCHWANKL, L. (2002) 'Product architecture and the propagation of engineering change' in 7th International Design Conference (Design 2002), Dubrovnik, Croatia, 1, 75-80
JARRETT, J.P. and CLARKSON, P.J. (2002) 'The surge-stagnate model for complex design' in Journal of Engineering Design, 13 (3), 189-196
JARRETT, J.P., CLARKSON, P.J. and DAWES, W.N. (2002) 'Improving turbomachinery design process management' in 2002 ASME Design Engineering Technical Conferences (DETC'02), Montreal, Quebec, Canada, 4, 161-170
JARRETT, J.P., DAWES, W.N. and CLARKSON, P.J. (2002) 'Accelerating turbomachinery design' in ASME Turbo Expo 2002, Amsterdam, The Netherlands, 1081-1088 (CD-ROM)
JOHNSON, K.W., LANGDON, P.M. and ASHBY, M.F. (2002) 'Grouping materials and processes for the designer: an application for cluster analysis.' in Materials and Design, 23 (1), 1-10 (0928-1045)
KEATES, S. and CLARKSON, P.J. (2002) 'Countering design exclusion' in Universal access and assistive technology, 33-42
KEATES, S. and CLARKSON, P.J. (2002) 'Defining design exclusion' in Universal access and assistive technology, 13-22
KEATES, S., CLARKSON, P.J. and LANGDON, P.M. (2002) 'Proceedings, 1st Cambridge Workshop on Universal Access and Assistive Technology', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR117
KEATES, S., CLARKSON, P.J. and ROBINSON, P. (2002) 'Gestural interfaces for motion-impaired users' in Encyclopedia of library information science, 70 (Supplement 33), 128-150
KEATES, S., CLARKSON, P.J. and ROBINSON, P. (2002) 'Developing a practical inclusive interface design approach' in Interacting with Computers, 14 (4, July 2002), 271-299 (0953-5438)
KEATES, S., CLARKSON, P.J. and ROBINSON, P. (2002) 'Providing access to e-information for older adults' in Workshop on "A new research agenda for older adults", HCI2002, South Bank University, London, 19-20
KEATES, S., CLARKSON, P.J. and ROBINSON, P. (2002) 'Understanding how to improve the accessibility of computers through cursor control studies' in ACM Conference on Human Factors in Computing Systems (CHI 2002), Seattle, USA, 766-767
KEATES, S., CLARKSON, P.J., LANGDON, P.M. and ROBINSON, P. (2002) 'Universal Access and Assistive Technology, vol 1', Springer (306), 1852335955
KEATES, S., HWANG, F., LANGDON, P.M., CLARKSON, P.J. and ROBINSON, P. (2002) 'The use of cursor measures for motion-impaired computer users' in 5th International ACM SIGCAPH Conference on Assistive Technologies (ASSETS 2002), Edinburgh, UK, 135-142
KEATES, S., HWANG, F., LANGDON, P.M., CLARKSON, P.J. and ROBINSON, P. (2002) 'The use of cursor measures for motion-impaired computer users.' in Universal Access in the Information Society, 2 (1), 18-29
KEATES, S., LANGDON, P.M., CLARKSON, P.J. and ROBINSON, P. (2002) 'User models and user physical capability' in User Modeling and User-Adapted Interaction, 12, 139-169
KELLAR, W. (2002) 'Geometry modelling in computational fluid dynamics and Computational Design', PhD-thesis, Cambridge University Engineering Department (Dec)
KENNISH, Y.C., SHERCLIFF, H.R. and McGRATH, G.C. (2002) 'Heat flow model for laser welding of polymers' in Annual Technical Conference (ANTEC 2002), San Francisco, CA, USA, 1-Processing, 1132-1136
LANGDON, P.M., ADAMS, R. and CLARKSON, P.J. (2002) 'Universal access to assistive technology through 'client-centred' cognitive assessment' in Universal access, theoretical perspectives, practice and experience, 153-164
LANGDON, P.M., ADAMS, R. and CLARKSON, P.J. (2002) 'Universal access to assistive technology through client-centred cognitive assessment' in 7th European Research Consortium for Informatics and Mathematics Workshop (ERCIM) "User interfaces for all", Paris (Chantilly), France, 555-567
LANGDON, P.M., HWANG, F., KEATES, S., CLARKSON, P.J. and ROBINSON, P. (2002) 'Developing assistive interfaces for motion-impaired users using cursor movement analysis in conjunction with haptic feedback' in 4th International Conference on Disability, Virtual Reality and Associated Technologies (ICDVRAT 2002), Veszprem, Hungary, 223-230
LANGDON, P.M., HWANG, F., KEATES, S., CLARKSON, P.J. and ROBINSON, P. (2002) 'Investigating haptic assistive interfaces for motion-impaired users: Force-channels and competitive attractive-basins' in Eurohaptics 2002, Edinburgh, UK, 122-127
LI, G., BRACEWELL, R.H. and WALLACE, K.M. (2002) 'Design rationale research - A literature survey', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR115
LI, G., BRACEWELL, R.H. and WALLACE, K.M. (2002) 'Design definition report analysis', Engineering Design Centre, University of Cambridge, May Confidential report for the BAE SYSTEMS/RR UTP for Design
LI, J-P., BALAZS, M.E., PARKS, G.T. and CLARKSON, P.J. (2002) 'A species conserving genetic algorithm for multimodal function optimization' in Evolutionary Computation, 10 (3), 207-234 (1089-778X)
LIU, J-S., PARKS, G.T. and CLARKSON, P.J. (2002) 'Optimisation of turbine disk profiles by metamorphic development' in Transactions - American Society of Mechanical Engineers Journal of Mechanical Design, 124 (2), 192-200 (1050-0472)
MAINE, E. and ASHBY, M.F. (2002) 'Succeeding with new materials. A comprehensive guide for assessing market potential', Department of Engineering, University of Cambridge, 1902546113
MATTHEWS, P.C. (2002) 'The application of self organizing maps in conceptual design', PhD-thesis, Cambridge University Engineering Department
MATTHEWS, P.C., BLESSING, L.T.M. and WALLACE, K.M. (2002) 'The introduction of a design heuristics extraction method' in Advanced Engineering Informatics, 16 (1), 3-19
MATTHEWS, P.C., STANDINGFORD, D.W.F. and HOLDEN, C.M.E. (2002) 'Method of design using genetic programming', UK, GB0228751.4, 10 December 2002 Application filed
MELO, A.F. (2002) 'A state-action model for design process planning', PhD-thesis, Cambridge University Engineering Department
MELO, A.F. and CLARKSON, P.J. (2002) 'Planning and scheduling based on an explicit representation of the state of the design' in 2002 ASME Design Engineering Technical Conferences (DETC'02), Montreal, Quebec, Canada, 89-98
MELO, A.F. and CLARKSON, P.J. (2002) 'Evaluation of the current state in a design schedule' in Engineering Design Conference (EDC 2002), King's College, London, UK, 1, 239-248
MOULTRIE, J., FRASER, P. and CLARKSON, P.J. (2002) 'The innovation-styling spectrum: factors constraining the design ambition of UK SMEs' in Design 2002 - 7th International Design Conferenace, Cavtat-Dubrovnik, Croatia, 1, 673-678
MOULTRIE, J., FRASER, P. and CLARKSON, P.J. (2002) 'The innovation-styling spectrum: a framework for the valuation of industrial design involvement in new product development' in 9th International Product Development Management Conference, Sophia Antipolis, France,
MOULTRIE, J., FRASER, P. and CLARKSON, P.J. (2002) 'The innovation - styling spectrum: a framework for the valuation of industrial design involvement in new product introduction' in International Journal of Productivity and Performance Management, 55 (3&4), 184-216
O'DONOVAN, B.D., CLARKSON, P.J. and ECKERT, C.M. (2002) 'Signposting: a generic framework for design process modelling' in 7th International Conference on Artificial Intelligence in Design (AID'02) Workshop notes, Cambridge University Engineering Department, UK, Design Process Modelling, -
O'DONOVAN, B.D., CLARKSON, P.J. and JARRETT, J.P. (2002) 'A statistical view of the design process' in Engineering Design Conference (EDC 2002), King's College, London, UK, 1, 175-184
O'DONOVAN, B.D., CLARKSON, P.J. and MELO, A.F. (2002) 'Development process simulation using 'Signposting'' in Concurrent Engineering Conference 2002 (CECONF 2002), Cranfield University, UK,
PAHL, G. and WALLACE, K.M. (2002) 'Using the concept of functions to help synthesise solutions' in Engineering computational design. Understanding, approaches and tools, 109-119
PAPALAMBROS, P.Y. and SHEA, K. (2002) 'Creating structural configurations.' in Formal engineering computational design, 93-125
SHEA, K., FEST, E. and SMITH, I. (2002) 'Developing intelligent tensegrity structures with stochastic search' in Advanced Engineering Informatics, 16 (1), 21-40
SHEFELBINE, S., CLARKSON, P.J. and FARMER, R. (2002) 'Good design practice for medical devices and equipment - requirements capture, vol 1', University of Cambridge Engineering Design Centre/University of Cambridge Institute of Manufacturing (1-78), 1902546105
SIRISALEE, P. (2002) 'Multi-criteria material selection', Cambridge University Engineering Department, First Year Report
SMITH, J. (2002) 'Design for reliability during concept development', PhD-thesis, Cambridge University Engineering Department
STACEY, M.K., ECKERT, C.M. and WILEY, J. (2002) 'Expertise and creativity in knitwear design' in International Journal of New Product Development and Innovation, 4 (1), 49-64
STACEY, M.K., ECKERT, C.M., EARL, C.F., BUCCIARELLI, L. and CLARKSON, P.J. (2002) 'A comparative programme for design research' in Common Ground Conference, London, UK,
STARLING, A.C. and SHEA, K. (2002) 'A clock grammar: the use of a parallel grammar in performance-based mechanical synthesis' in 2002 ASME Design Engineering Technical Conferences (DETC'02), Montreal, Quebec, Canada, 294
SUPPAPITNARM, A. and AHMED, S. (2002) 'E-learning from knowledge and experience capture in design' in The first national conference of electronic business, Thammasart University, Bangkok, Thailand,
SUPPAPITNARM, A., PARKS, G.T., SHEA, K. and CLARKSON, P.J. (2002) 'A multiobjective optimisation approach for the conceptual design of frame structures' in Adaptive computing in design and manufacture V, 109-120
VALE, C.A.W. and SHEA, K. (2002) 'Learning a 'Bag of Tricks': Intelligent search for rule-based design methods' in 4th ASMO-UK/ISSMO Conference on Engineering Computational Design, Newcastle-upon-Tyne, UK, 184-191
WARD, J.R. (2002) 'Design verification in the medical device industry', PhD-thesis, Cambridge University Engineering Department
WARD, J.R., CLARKSON, P.J., BISHOP, D. and FOX, S. (2002) 'Good design practice for medical devices and equipment - design verification, vol 3', University of Cambridge Engineering Design Centre/University of Cambridge Institute of Manufacturing, 1902546121
YANG, X.Y., XIE, Y.M., LIU, J-S., PARKS, G.T. and CLARKSON, P.J. (2002) 'Perimeter control of the bidirectional evolutionary optimization method' in Structural and Multidisciplinary Optimization, 24 (6), 430-440

2001

AHMED, S. (2001) 'Understanding the use and reuse of experience in engineering design', PhD-thesis, Cambridge University Engineering Department
AHMED, S. and WALLACE, K.M. (2001) 'Developing a support system for novice designers in industry' in Design management - process and information issues. Proceedings of the 13th International Conference on Engineering Design (ICED'01), 75-82
AHMED, S., WALLACE, K.M. and LANGDON, P.M. (2001) 'Identifying the strategic knowledge of experienced designers' in Strategic Knowledge and Concept Formation III, University of Sydney, Sydney, Australia, 31-53
ALEXANDER, K.L., CLARKSON, P.J., BISHOP, D. and FOX, S. (2001) 'Good design practice for medical devices and equipment - a framework, vol 1', University of Cambridge Engineering Design Centre/University of Cambridge Institute of Manufacturing (1-64) (Mill Lane, Cambridge, CB2 1RX, UK email: ifm-enquiries@eng.cam.ac.uk), 1902546083
ASHBY, M.F. and JOHNSON, K.W. (2001) 'Classification and choice in product design', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR108
ASHCROFT, A.D.C. (2001) 'User capabilities and computer access', MPhil-thesis, Cambridge University Engineering Department
ASHCROFT, A.D.C., KEATES, S. and CLARKSON, P.J. (2001) 'User capabilities and computer access', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR106
AURISICCHIO, M. (2001) 'The capture and structure of engineering design knowledge', Engineering Design Centre, University of Cambridge, First Year Report
BALAZS, M.E., CLARKSON, P.J. and PARKS, G.T. (2001) 'Mapping the design optimization landscape' in 13th International Conference on Engineering Design (ICED'01), Glasgow, Scotland, UK, Design Methods for Performance and Sustainability, 211-218
BALAZS, M.E., LI, J., PARKS, G.T. and CLARKSON, P.J. (2001) 'Multimodal function optimization using species conservation' in 5th International Conference on Artificial Neural Networks and Genetic Algorithms (ICANNGA'01), Prague, Czech Republic, 1, 252-255
BALAZS, M.E., LI, J., PARKS, G.T. and CLARKSON, P.J. (2001) 'The effect of distance measure in a GA with species conservation' in Congress on Evolutionary Computation (CEC2001), Seoul, Korea, 67-74
BALAZS, M.E., PARKS, G.T. and CLARKSON, P.J. (2001) 'Optimisation in industry - what does industry really need?' in Optimisation in Industry III, Il Ciocco Resort, Tuscany, Italy,
BARR, G., SIMS-WILLIAMS, J., BURGESS, S. and CLARKSON, P.J. (2001) 'The organisation and management of engineering tenders' in 13th International Conference on Engineering Design (ICED'01), Glasgow, Scotland, UK, Design Management - Process and Information Issues, 497-504
BATTEN, C.F., HOLBURN, D.M., BRETON, B.C. and CALDWELL, N.H.M. (2001) 'Sharpness search algorithms for automatic focusing in the scanning electron microscope' in Scanning: The Journal of Scanning Microscopies, 23 (2), 112-113
BERMELL-GARCIA, P., LI, G., FAN, I. and PORTER, R. (2001) 'Effective abstraction of engineering knowledge for KBE implementation' in 13th International Conference on Engineering Design (ICED'01), Glasgow, Scotland, UK, Design Management - Process and Information Issues, 99-106
BLESSING, L.T.M. and BAUMGARTNER, C. (2001) 'Established causal links between success characteristics and project outcome' in 13th International Conference on Engineering Design (ICED'01), Glasgow, Scotland, UK, Design Research - Theories, Methodologies, and Product Modelling, 189-196
BLESSING, L.T.M. and BAUMGARTNER, C.E. (2001) 'Establishing casual links between success characteristics and project outcome' in 13th International Conference on Engineering Design (ICED'01), Glasgow, UK,
BRACEWELL, R.H. and SHEA, K. (2001) 'CDRe: A product platform to support creation and evaluation of advanced computer aided engineering tools' in 13th International Conference on Engineering Design (ICED'01), Glasgow, Scotland, UK, Design Methods for Performance and Sustainability, 539-546
BRACEWELL, R.H. and WALLACE, K.M. (2001) 'Designing a representation to support function-means based synthesis of mechanical design solutions' in 13th International Conference on Engineering Design (ICED'01), Glasgow, Scotland, UK, Design Methods for Performance and Sustainability:, 275-282
BRACEWELL, R.H., SHEA, K., LANGDON, P.M., BLESSING, L.T.M. and CLARKSON, P.J. (2001) 'A methodology for computational design tool research' in 13th International Conference on Engineering Design (ICED'01), Glasgow, Scotland, UK, Design Research - Theories, Methodologies, and Product Modelling, 181-188
BRCHET, Y., ASHBY, M.F. and SALVO, L. (2001) 'S©lection des mat©riaux et des proc©d©s, vol TM Volume 20', Presses Universitaires de Lausanne, France (398), 2880744733
CALDWELL, N.H.M., BRETON, B.C. and HOLBURN, D.M. (2001) 'Prolog knowledge base supplies embedded and Web remote control: intelligence for microscopes' in PC AI, 15 (3 (May/June)), 25-26, 28
CALDWELL, N.H.M., BRETON, B.C. and HOLBURN, D.M. (2001) 'XpertEze: developing embedded intelligence for the scanning electron microscope' in Microscopy and Microanalysis, 7 (2), 966-967
CARDOSO, C., CLARKSON, P.J., HARRISON, L.J., LANGDON, P.M. and KEATES, S. (2001) 'Assessing the accessibility of everyday products' in International Conference on Inclusive Design and Communications (INCLUDE 2001), The Royal College of Art, London, UK, 56
CARDOSO, C., KEATES, S. and CLARKSON, P.J. (2001) 'Results of a workshop on assessing accessibility of everyday products', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR112
CHAKRABARTI, A. (2001) 'Towards hybrid methods for synthesis' in 13th International Conference on Engineering Design (ICED'01), Glasgow, Scotland, UK, Design Research - Theories, Methodologies, and Product Modelling, 379-386
CHAKRABARTI, A. (2001) 'Improving efficiency of procedures for compositional synthesis by using bidirectional search' in Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 15 (1), 67-80
CHAKRABARTI, A. (2001) 'Sharing in design: categories, importance and issues' in 13th International Conference on Engineering Design (ICED'01), Glasgow, Scotland, UK, Design Methods for Performance and Sustainability, 563-570
CHAKRABARTI, A. and BLIGH, T.P. (2001) 'A scheme for functional reasoning in conceptual design' in Design Studies, 22 (6), 493-517
CHAKRABARTI, A. and REGNO, R. (2001) 'A new approach to structure sharing in design' in 13th International Conference on Engineering Design (ICED'01), Glasgow, Scotland, UK, Design Methods for Performance and Sustainability, 155-162
CHANG, M., PARKS, G.T. and LEWINS, J.D. (2001) 'Estimation of system reliability by variationally processed Monte Carlo simulation' in Recent advances in reliability and quality engineering, 2, 93-122 (March)
CLARKSON, P.J. (2001) 'Cambridge Engineering Design Centre' in Engineering Designer, 27 (1), 4
CLARKSON, P.J. and KEATES, S. (2001) 'A practical inclusive design approach' in International Conference on Inclusive Design and Communications (INCLUDE 2001), The Royal College of Art, London, UK, 72-73
CLARKSON, P.J. and KEATES, S. (2001) 'Towards an inclusive design approach - a case study of exclusion' in 13th International Conference on Engineering Design (ICED'01), Glasgow, Scotland, UK, Design Methods for Performance and Sustainability, 355-362
CLARKSON, P.J., HARRISON, L.J. and KEATES, S. (2001) 'How to assess whether new technology is necessarily better technology' in International Conference on Inclusive Design and Communications (INCLUDE 2001), The Royal College of Art, London, UK, 94
CLARKSON, P.J., MELO, A.F. and ECKERT, C.M. (2001) 'Visualisation techniques to assist design process planning' in 13th International Conference on Engineering Design (ICED'01), Glasgow, Scotland, UK, Design Management - Process and Information Issues, 321-327
CLARKSON, P.J., SIMONS, C.S. and ECKERT, C.M. (2001) 'Predicting change propagation in complex design' in 2001 ASME Design Engineering Technical Conferences (DETC'01), Pittsburgh, Pennsylvania, USA, 155-164
CLARKSON, P.J., SIMONS, C.S. and ECKERT, C.M. (2001) 'Change prediction for product redesign' in 13th International Conference on Engineering Design (ICED'01), Glasgow, Scotland, UK, Design Management - Process and Information Issues, 577-584
COY, J., KEATES, S. and CLARKSON, P.J. (2001) 'Improving accessibility in the workplace: Manual data entry in video coding' in IMechE Mail Technology Evolution to E-Revolution, Brighton, UK, 201-210
COY, J., KEATES, S., HARRISON, L.J., CLARKSON, P.J. and ROBINSON, P. (2001) 'Design for accessibility: The personal information point' in IMechE Mail Technology: Evolution to E-Revolution, Brighton, UK, 159-168
CULLEY, S., DUFFY, A., MCMAHON, C. and WALLACE, K.M. (2001) 'Design methods for performance and sustainability. Proceedings of the 13th international conference on engineering design ICED'01', Professional Engineering Publishing
CULLEY, S., DUFFY, A., MCMAHON, C. and WALLACE, K.M. (2001) 'Design management - process and information issues. Proceedings of the 13th international conference on engineering design ICED'01', Professional Engineering Publishing
CULLEY, S., DUFFY, A., MCMAHON, C. and WALLACE, K.M. (2001) 'Design research - theories, methodologies, and product modelling. Proceedings of the 13th international conference on engineering design ICED'01', Professional Engineering Publishing
CULLEY, S., DUFFY, A., MCMAHON, C. and WALLACE, K.M. (2001) 'Design application in industry and education. Proceedings of the 13h International Conference on Engineering Design ICED'01', Professional Engineering Publishing
DEL-REY-CHAMORRO, F.M. (2001) 'Understanding the use and retrieval of product and process knowledge', Cambridge University Engineering Department, First Year Report
EARL, C.F., ECKERT, C.M. and JOHNSON, J. (2001) 'Complexity in planning design processes' in 13th International Conference on Engineering Design (ICED'01), Glasgow, Scotland, UK, Design Research - Theories, Methodologies, and Product Modelling, 149-156
EARL, C.F., ECKERT, C.M. and JOHNSON, J.H. (2001) 'Complexity of planning in design' in 2001 ASME Design Engineering Technical Conferences (DETC'01), Pittsburgh, Philadelphia, USA, DETC2001/DTM-21697,
ECKERT, C.M. (2001) 'The communication bottleneck in knitwear design: analysis and computing solutions' in Computer Supported Cooperative Work, 10 (1), 29-74
ECKERT, C.M. and DEMAID, A. (2001) 'Classifying design and design management in seasonal industries' in International Journal of Innovation Management, 5 (4), 401-425 (1363-9196)
ECKERT, C.M. and STACEY, M.K. (2001) 'Designing in the context of fashion - Designing the fashion context' in Designing the Context Symposium, Delft University of Technology, The Netherlands, 113-129
ECKERT, C.M. and STACEY, M.K. (2001) 'Sources of inspiration in industrial practice: the case of knitwear design', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR111
ECKERT, C.M. and STACEY, M.K. (2001) 'Dimensions of communication in design' in 13th International Conference on Engineering Design (ICED'01), Glasgow, Scotland, UK, Design Management - Process and Information Issues, 473-480
ECKERT, C.M., CLARKSON, P.J. and STACEY, M.K. (2001) 'Information flow in engineering companies: problems and their causes' in 13th International Conference on Engineering Design (ICED'01), Glasgow, Scotland, UK, Design Management-Process and Information Issues, 43-50
ECKERT, C.M., ZANKER, W. and CLARKSON, P.J. (2001) 'Aspects for a better understanding of changes' in 13th International Conference on Engineering Design (ICED'01), Glasgow, Scotland, UK, Design Application in Industry and Education, 147-154
EVANS, A.G., HUTCHINSON, J.W., FLECK, N.A., ASHBY, M.F. and WADLEY, H.N. (2001) 'The topological design of multifunctional cellular metals' in Progress in Materials Science, 46 (3-4), 309-327
GERST, M., ECKERT, C.M., CLARKSON, P.J. and LINDEMANN, U. (2001) 'Innovation in the tension of change and reuse' in 13th International Conference on Engineering Design (ICED'01), Glasgow, Scotland, UK, Design Research - Theories, Methodologies, and Product Modelling, 371-378
HARMER, Q., CLARKSON, P.J., WALLACE, K.M. and FARMER, A.R. (2001) 'Design for low-volume production, vol 1', Institute for Manufacturing, University of Cambridge (1-88), 1902546067
HARRISON, L.J., CLARKSON, P.J. and KEATES, S. (2001) 'Inclusive design: user capabilities and product demands' in 13th International Conference on Engineering Design (ICED'01), Glasgow, Scotland, UK, Design Methods for Performance and Sustainability, 299-306
HWANG, F. (2001) 'Towards improved computer interfaces for motion-impaired users', Engineering Design Centre, University of Cambridge, First Year Report
HWANG, F., KEATES, S., LANGDON, P.M., CLARKSON, P.J. and ROBINSON, P. (2001) 'Perception and haptics: Towards more accessible computers for motion-impaired users' in Perceptual User Interfaces (PUI 2001), Orlando, FL, USA, 8 pages in total (In electronic format only: www.cs.ucsb.edu/conferences/PUI/PUIWorkshop/index.html)
HWANG, F., LANGDON, P.M., KEATES, S. and CLARKSON, P.J. (2001) 'Haptic assistance to improve computer access for motion-impaired users' in Eurohaptics 2001, Birmingham, UK, 176-178
JARRATT, T.A.W. (2001) 'Change propagation in product development', Cambridge University Engineering Department, First Year Report
JARRATT, T.A.W. and COOKE, A.J. (2001) 'A comparison of cricket ball cores' in Materials and Science in Sports, San Diego, USA, (CD-ROM)
JARRETT, J.P. and CLARKSON, P.J. (2001) 'Improving the product by accelerating the process' in 13th International Conference on Engineering Design (ICED'01), Glasgow, Scotland, UK, Design Research - Theories, Methodologies, and Product Modelling, 141-148
JOHNSON, K.W. (2001) 'A creative process for material selection in product design', PhD-thesis, Cambridge University Engineering Department (Dec)
JOHNSON, K.W., LENAU, T. and ASHBY, M.F. (2001) 'The aesthetic and perceived attributes of materials and products', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR114
KEATES, S. and CLARKSON, P.J. (2001) 'Combining utility, usability and accessibility methods for universal access' in ACM CHI Workshop on Universal Design, Seattle, USA, (Web publication)
KEATES, S., CLARKSON, P.J. and ROBINSON, P. (2001) 'Gesture input and motion-impaired users' in Encyclopedia of microcomputers, 26 (Supplement 5), 147-166
KEATES, S., CLARKSON, P.J. and ROBINSON, P. (2001) 'Enabling computer access for motion-impaired users' in ERCIM News Special Theme: Human Computer Interaction, (46), 43-44
KEATES, S., CLARKSON, P.J. and ROBINSON, P. (2001) 'User modelling and motion-impaired users' in Encyclopedia of microcomputers, 1, 307-322
KEATES, S., HWANG, F., LANGDON, P.M., CLARKSON, P.J. and ROBINSON, P. (2001) 'Using cursor control measures to suggest methods of cursor assistance for motion-impaired users.', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR113
KEATES, S., LANGDON, P.M., CLARKSON, P.J. and ROBINSON, P. (2001) 'A practical approach to design for universal access: the information point case study' in 1st International Conference on Universal Access and HCI (UAHCI), New Orleans, USA, 18-22
KEATES, S., LANGDON, P.M., CLARKSON, P.J. and ROBINSON, P. (2001) 'Cognitive considerations in the design of multi-modal input systems' in 1st International Conference on Universal Access and HCI (UAHCI), New Orleans, USA, 353-357
KENNISH, Y.C., SHERCLIFF, H.R. and LIDDELL, I. (2001) 'Tensile strength and tear resistance of woven polyethylene fabric', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR109
LANGDON, P.M. and CHAKRABARTI, A. (2001) 'Improving access to design solution spaces using visualisation and data reduction techniques' in 13th International Conference on Engineering Design (ICED'01), Glasgow, Scotland, UK, Design Management - Process and Information Issues, 3-10
LANGDON, P.M., BRACEWELL, R.H., BLESSING, L.T.M., WALLACE, K.M. and CLARKSON, P.J. (2001) 'A practical methodology for integrating software development and empirical techniques in design research' in 13th International Conference on Engineering Design (ICED'01), Glasgow, Scotland, UK, Design Research - Theories, Methodologies, and Product Modelling, 557-564
LANGDON, P.M., KEATES, S., CLARKSON, P.J. and ROBINSON, P. (2001) 'Using haptic feedback to enhance computer interaction for motion-impaired users' in International Journal of Virtual Reality, 5 (2)
LANGDON, P.M., KEATES, S., CLARKSON, P.J. and ROBINSON, P. (2001) 'Investigating the cursor movement parameters for haptic assistance of motion-impaired users' in Integration of assistive technology in the information age, 237-242
LANGDON, P.M., KEATES, S., CLARKSON, P.J. and ROBINSON, P. (2001) 'Investigating the parameters of force-feedback assistance for motion-impaired users in a GUI selection task' in 1st International Conference on Universal Access and HCI (UAHCI), New Orleans, USA, 938-942
LI, G., BRACEWELL, R.H. and WALLACE, K.M. (2001) 'A knowledge framework to support engineering design' in Concurrent Engineering (CE 2001),
LI, J-P., BALAZS, M.E., PARKS, G.T. and CLARKSON, P.J. (2001) 'Complexity analysis of a genetic algorithm using species conservation' in Congress on Evolutionary Computation (CEC2001), Seoul, Korea, 52-59
LIU, J-S. and LU, T.J. (2001) 'Optimal design of optical fibre-holding microclips with metamorphic development' in Journal of Micromechanics and Microengineering, 11, 195-201
LIU, J-S., PARKS, G.T. and CLARKSON, P.J. (2001) 'Shape optimisation of turbine disks under multiple thermo-mechanical loads' in 3rd ASMO UK/ISSMO Conference on Engineering Design Optimization, Harrogate, UK, 151-158
LIU, J-S., PARKS, G.T. and CLARKSON, P.J. (2001) 'Shape optimisation of axisymmetric cylindrical nozzles in spherical pressure vessels subject to stress constraints' in International Journal of Pressure Vessels and Piping, 78 (1), 1-9
MAINE, E.M.A. and ASHBY, M.F. (2001) 'Viability assessment: a case study of metal foams' in Encyclopedia of materials: science and technology, (September)
MATTHEWS, P.C., AHMED, S. and AURISICCHIO, M. (2001) 'Extracting experience through protocol analysis' in International Conference on Data Mining 2001, Workshop on Integrating Data Mining and Knowledge Management, San Jose, California, USA, Technical Report CPSLO-CSC-01-03,
MATTHEWS, P.C., LANGDON, P.M. and WALLACE, K.M. (2001) 'New techniques for design knowledge exploration: a comparison of three data grouping approaches' in 13th International Conference on Engineering Design (ICED'01), Glasgow, Scotland, UK, Design Management-Process and Information Issues, 107-114
MELO, A.F. and CLARKSON, P.J. (2001) 'Design process planning using a state-action model' in 13th International Conference on Engineering Design (ICED'01), Glasgow, Scotland, UK, Design Management - Process and Information Issues, 345-352
MOULTRIE, J. (2001) 'Developing a design audit tool', Cambridge University Engineering Department, First Year Report
MOULTRIE, J., FRASER, P., HOLDWAY, R. and CLARKSON, P.J. (2001) 'Better by design: development of a framework to guide design improvement in SMEs' in 13th International Conference on Engineering Design (ICED'01), Glasgow, Scotland, UK, Design Application in Industry and Education, 3-10
NG, C-W. (2001) 'An evaluation of a new product data model', MPhil-thesis, Cambridge University Engineering Department
NIDAMARTI, S., CHAKRABARTI, A. and BLIGH, T.P. (2001) 'Improving requirement satisfaction ability of the designer' in 13th International Conference on Engineering Design (ICED'01), Glasgow, Scotland, UK, Design Research - Theories, Methodologies, and Product Modelling, 237-244
O'DONOVAN, B.D. (2001) 'Building better design process models', Cambridge University Engineering Department, First Year Report
PARKS, G.T., LI, J., BALAZS, M-E. and MILLER, I. (2001) 'An empirical investigation of elitism in multiobjective genetic algorithms' in Foundations of Computing and Decision Sciences, 26 (1), 51-74 (0867-6356)
RODGERS, P.A., CALDWELL, N.H.M. and HUXOR, A.P. (2001) 'An Internet-based approach to the capture and reuse of knowledge in design' in Industrial knowledge management: a micro-level approach, 249- 263 (Knowledge Management)
RODGERS, P.A., CALDWELL, N.H.M., HUXOR, A.P. and CLARKSON, P.J. (2001) 'The management of concept design knowledge in modern product development organisations' in International Journal of Computer Integrated Manufacturing, 14 (1), 108-115
SEE, H.J., PARKS, G.T., VASSILIADIS, V.S. and WILSON, D.I. (2001) 'Simulated annealing based scheduling algorithm for selecting reverse osmosis membrane cleaning schedules' in Water software systems: theory and applications, 1, 149-164
SEFFEN, K.A., PARKS, G.T. and CLARKSON, P.J. (2001) 'Observations on the controllability of motion of two-wheelers' in Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 215 (2), 143-156 (0959-6518)
SHEA, K. (2001) 'An approach to multiobjective optimisation for parametric synthesis' in 13th International Conference on Engineering Design (ICED'01), Glasgow, Scotland, UK, Design Methods for Performance and Sustainability, WDK 28, 203-210
SHIEH, J., HUBER, J.E., FLECK, N.A. and ASHBY, M.F. (2001) 'The selection of sensors' in Progress in Materials Science, 46 (3-4), 461-504
SMITH, J. and CLARKSON, P.J. (2001) 'Improving reliability during conceptual design' in 13th International Conference on Engineering Design (ICED'01), Glasgow, Scotland, UK, Design Methods for Performance and Sustainability, 83-90
STACEY, M.K. and ECKERT, C.M. (2001) 'Managing uncertainty in design communications' in 13th International Conference on Engineering Design (ICED'01), Glasgow, Scotland, UK, Design Management - Process and Information Issues, 441-448
SUPPAPITNARM, A. (2001) 'Multiobjective optimisation of bicycle design', PhD-thesis, Cambridge University Engineering Department
SUPPAPITNARM, A. (2001) 'A multiobjective simulated annealing code for conceptual bicycle-system design generation with a structural shape grammar', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR110
SUPPAPITNARM, A., PARKS, G.T., SHEA, K. and CLARKSON, P.J. (2001) 'Conceptual design of the bicycle-rider system by multiobjective optimisation' in 3rd ASMO UK/ISSMO Conference on Engineering Design Optimization, Harrogate, UK, 211-218
SYMONS, D.D. (2001) 'Cover / stand for portable videophone. Design for videophone handset with integral camera and stand for Orange Personal Communications Ltd', UK, WO 01/61440, 23 August 2001
WALLACE, K.M., CLEGG, C. and KEANE, A. (2001) 'Visions for engineering design: a multi-disciplinary perspective' in 13th International Conference on Engineering Design (ICED'01), Glasgow, Scotland, UK, Design Applications in Industry and Education, 107-114
WARD, J.R. and CLARKSON, P.J. (2001) 'Design verification support for the medical device industry' in 13th International Conference on Engineering Design (ICED'01), Glasgow, Scotland, UK, Design Application in Industry and Education, 211-218
WARD, J.R. and CLARKSON, P.J. (2001) 'Device-related medical error - current practice and solutions' in The drug delivery companies report 2001, 58-63

2000

AHMED, S., WALLACE, K.M., BLESSING, L.T.M. and MOSS, M. (2000) 'Identifying differences between novice and experienced designers' in Engineering Design Conference (EDC 2000), Brunel University, Uxbridge, UK, 97-106
ALEXANDER, K.L. and CLARKSON, P.J. (2000) 'A validation model for the medical devices industry' in Engineering Design Conference (EDC 2000), Brunel University, Uxbridge, UK, 389-396
ALEXANDER, K.L. and CLARKSON, P.J. (2000) 'Good design practice for medical devices and equipment, part II: design for verification' in Journal of Medical Engineering and Technology, 24 (2), 53-62
ALEXANDER, K.L. and CLARKSON, P.J. (2000) 'Good design practice for medical devices and equipment, part I: a review of current literature' in Journal of Medical Engineering and Technology, 24 (1), 5-13
ASHBY, M.F. (2000) 'Multi-objective optimisation in material design and selection' in Acta Materialia, 48 (1), 359-369
ASHBY, M.F. and MAINE, E.M.A. (2000) 'Design aspects of metal matrix composite usage' in Comprehensive composite materials, Volume 3: Metal Matrix Composites
ASHBY, M.F., EVANS, A.G., FLECK, N.A., HUTCHINSON, J.W., GIBSON, L.J. and WADLEY, H. (2000) 'Metal foams - a design guide, vol 1', Butterworth-Heinemann (June), 0750672196
BALAZS, M.E. and BROWN, D. (2000) 'Design simplification by analogical reasoning' in 4th Knowledge Intensive CAD Workshop Series, University of Parma, Parma, Italy,
BALAZS, M.E., PARKS, G.T. and CLARKSON, P.J. (2000) 'Survey on the status of Computational Design research and practice', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR99
BARR, G., BURGESS, S.G., CONNOR, A.M. and CLARKSON, P.J. (2000) 'Tendering for engineering contracts' in Engineering Design Conference (EDC 2000), Brunel University, Uxbridge, UK, 499-506
BATARD, I. (2000) 'Analysis and improvement of the use of Dymola multi body systems modelling in the mechanical design process', Cambridge University Engineering Department, Technical Report
BLESSING, L.T.M. and PARKER, N. (2000) 'Information needs of SMEs', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR94
BLESSING, L.T.M. and WALLACE, K.M. (2000) 'Supporting the knowledge life-cycle' in Knowledge - Intensive CAD, 21-38
BROWN, T.M.C. and COOKE, A.J. (2000) 'Aeromechanical and aerodynamic behaviour of tennis balls' in 1st International Congress on Tennis, Science and Technology, London, 145-153
CALDWELL, N.H.M., BRETON, B.C. and HOLBURN, D.M. (2000) 'WebXpertEze: intelligent instruments via the Internet' in 12th European Congress on Electron Microscopy, Brno, Czech Republik, III: Instrumentation and Methodology, 411-412
CALDWELL, N.H.M., CLARKSON, P.J., RODGERS, P.A. and HUXOR, A.P. (2000) 'Web-based knowledge management for distributed design' in IEEE Intelligent Systems, 15 (3), 40-47
CHAKRABARTI, A. (2000) 'Increasing efficiency of compositional synthesis by improving the database of its building blocks' in Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 14, 403-414 (0890-0604)
CHARLTON, C.T. and WALLACE, K.M. (2000) 'A web broker for component retrieval in mechanical engineering' in Design Studies, 21 (2), 167-186 (0142-694X)
CHARLTON, C.T. and WALLACE, K.M. (2000) 'Reminding and context in design: a model inspired by language' in 6th International Conference on Artificial Intelligence in Design (AID'00), Worcester Polytechnic Institute, Massachusetts, USA, 1, 569-588
CLARKSON, P.J. (2000) 'Medical device design: current practice and good practice' in Management Forum: Recent Advances in Pressurised Inhalers, London,
CLARKSON, P.J. (2000) 'Signposting the design process' in 2000 Knowledge-Based Organisation (KBO) Conference, Paris,
CLARKSON, P.J. and HAMILTON, J.R. (2000) ''Signposting': a parameter-driven task-based model of the design process' in Research in Engineering Design, 12 (1), 18-38
CLARKSON, P.J., KEATES, S., COLEMAN, R., LEBBON, C. and JOHNSTON, M. (2000) 'I-Design Project (Inclusive Design for the Whole Population)' in Designing for the 21st Century: An International Conference on Universal Design, Rhode Island, USA, (web publication)
CLARKSON, P.J., KEATES, S., COLEMAN, R., LEBBON, C. and JOHNSTON, M. (2000) 'A model for inclusive design' in Engineering Design Conference (EDC 2000), Brunel University, Uxbridge, UK, 203-212
CLARKSON, P.J., MELO, A.F. and CONNOR, A. (2000) 'Signposting for design process improvement' in 6th International Conference on Artificial Intelligence in Design (AID'00), Worcester Polytechnic Institute, Massachusetts, USA, 1, 333-353
CLARKSON, P.J., MELO, A.F. and ECKERT, C.M. (2000) 'Visualization of routes in design process planning' in International Conference on Information Visualisation (IV2000), University of London, UK, 155-164
CLARKSON, P.J., SIMONS, C.S. and ECKERT, C.M. (2000) 'Change propagation in the design of complex products' in Engineering Design Conference (EDC 2000), Brunel University, Uxbridge, UK, 563-570
CONNOR, A.M. (2000) 'Generic tender process modelling : A guide for analysing and generating good practice tender processes', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR97
CONNOR, A.M. (2000) 'Generic tender process modelling : A portfolio of case studies', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR96
CONNOR, A.M. and BARR, G. (2000) 'Generic tender process model: A case study', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR93
CONNOR, A.M. and SHEA, K. (2000) 'A comparison of semi-deterministic and stochastic search techniques' in Evolutionary Design and Manufacture, Selected Papers from ACDM'00, Plymouth, UK, 287-298
CONNOR, A.M., CLARKSON, P.J., SHAHPAR, S. and LEONARD, P. (2000) 'Engineering computational design using Tabu search' in Engineering Design Conference (EDC 2000), Uxbridge, UK,
CONNOR, A.M., CLARKSON, P.J., SHAHPAR, S. and LEONARD, P. (2000) 'Engineering Computational Design using Tabu search' in Engineering Design Conference (EDC 2000), Brunel University, Uxbridge, UK, 371-378
COVINO, M.M., RODGERS, P.A., CLARKSON, P.J. and SMITH, J. (2000) 'Assessing reliability in mechanical systems' in Journal of Integrated Design & Process Science, 4 (2), 67-84
DONG, H. (2000) 'The study of the usage and the residents' behaviour of Ju'r Hutong' in 1st International Symposium for Environment Behaviour Research, South-east University, Nanjing, China,
EARL, C.F., ECKERT, C.M. and JOHNSON, J. (2000) 'Complexity of planning in design', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR107
ECKERT, C.M. and BEZ, H.E. (2000) 'A garment design system using constrained B©zier curves' in International Journal of Clothing Science and Technology, 12 (2), 134-143
ECKERT, C.M. and STACEY, M.K. (2000) 'Sources of inspiration: a language of design' in Design Studies, 21 (5), 523-538
ECKERT, C.M., CROSS, N.G. and JOHNSON, J.H. (2000) 'Intelligent support for communication in design teams: garment shape specifications in the knitwear industry' in Design Studies, 21, 99-112
ECKERT, C.M., STACEY, M.K. and CLARKSON, P.J. (2000) 'Algorithms and inspirations: creative reuse of design experience' in Greenwich 2000 International Symposium: Digital Creativity, University of Greenwich, London, UK, 1-10
ESAWI, A.M.K. and ASHBY, M.F. (2000) 'Computer-based selection of joining processes', Cambridge University Engineering Department, Technical Report CUED/C -EDC/TR92
ESAWI, A.M.K. and ASHBY, M.F. (2000) 'Computer-based selection of joining processes', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR92
FRANK, M., CANT, R.S. and COOKE, A.J. (2000) 'Computational fluid dynamics of shuttlecocks' in 3rd Conference Engineering of Sport, Sydney, Australia,
HARMER, Q.J., CLARKSON, P.J., FARMER, R.F. and WALLACE, K.M. (2000) 'Designing for low volume production', Cambridge University Engineering Department, Technical Report (Workbook) CUED/C-EDC/TR101
HOLBURN, D.M., BRETON, B.C., ROBERTSON, R.P., THOMPSON, J.T. and CALDWELL, N.H.M. (2000) 'VSEM : an interactive simulation and virtual reality model of the scanning electron microscope' in Microscopy and Microanalysis, 6 (2), 1156-1157
HOLBURN, D.M., ROBERTSON, R.P., BRETON, B.C. and CALDWELL, N.H.M. (2000) 'A virtual scanning electron microscope for teaching and training' in Microscopy and Analysis, (March/April), 5-7
JARRETT, J.P. (2000) 'Technology or methodology? An approach to designing better turbomachinery', PhD-thesis, Cambridge University Engineering Department
JARRETT, J.P. and CLARKSON, P.J. (2000) 'The surge-stagnate model for complex design' in Engineering Design Conference (EDC 2000), Brunel University, Uxbridge, UK, 771-778
JOHNSON, K.W., LANGDON, P.M. and ASHBY, M.F. (2000) 'Grouping materials and processes for the designer: an application for cluster analysis.', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR102
JOHNSON, K.W., SHERCLIFF, H.R. and ASHBY, M.F. (2000) 'Technology coupling in the design of sports equipment' in International Sports Engineering Association Conference (ISEA 2000), Sydney, Australia, 1, 21-34
KEATES, S., CLARKSON, P.J. and ROBINSON, P. (2000) 'Investigating the applicability of user models for motion-impaired users' in 4th International ACM SIGCAPH Conference on Assistive Technologies (ASSETS 2000), Arlington, VA, USA, 129-136
KEATES, S., CLARKSON, P.J., HARRISON, L.J. and ROBINSON, P. (2000) 'Towards a practical inclusive design approach' in 1st ACM Conference on Universal Usability (CUU 2000), Arlington, VA, USA, 45-52
KEATES, S., LANGDON, P.M., CLARKSON, P.J. and ROBINSON, P. (2000) 'Investigating the use of force feedback for motion-impaired users.' in 6th European Research Consortium for Informatics and Mathematics Workshop (ERCIM), Florence, Italy, 207-212
KEATES, S., LEBBON, C. and CLARKSON, P.J. (2000) 'Investigating industry attitudes to universal design' in Rehabilitation Engineering Society of North America (RESNA 00), Orlando, FL, USA, 1, 276-278
KENNISH, Y.C. (2000) 'Design and process selection for joints in flexible materials', MPhil-thesis, Cambridge University Engineering Department
KNOWLES, K., COOKE, A.J., LENNOX, T. and MASTROPIETRO, S. (2000) 'Design of real tennis balls' in Third Conference Engineering of Sport, Sydney, Australia,
LANGDON, P.M., KEATES, S., CLARKSON, P.J. and ROBINSON, P. (2000) 'Using haptic feedback to enhance computer interaction for motion-impaired users' in 3rd International Conference on Disability, Virtual Reality and Associated Technologies (ICDVRAT 2000), Alghero, Sardinia, Italy, 25-32
LEE, S.H., LIU, J-S-S. and PARKS, G.T. (2000) 'Optimal shapes of axisymmetric suspended objects loaded under self-weight (fruit optimisation)' in Second ASMO UK/ISSMO Conference on Engineering Design Optimization, University of Wales, Swansea, UK, 1, 117-123
LIU, J-S., PARKS, G.T. and CLARKSON, P.J. (2000) 'Shape optimisation of axisymmetric intersecting pressure vessels by metamorphic development' in Second ASMO UK/ISSMO Conference on Engineering Design Optimization, University of Wales, Swansea, UK, 1, 141-148
LIU, J-S., PARKS, G.T. and CLARKSON, P.J. (2000) 'Metamorphic development: a new topology optimisation method for continuum structures' in Structural and Multidisciplinary Optimization, 20 (4), 288-300
LIU, J-S-S. and HOLLAWAY, L. (2000) 'Computational Design of composite panel structures with stiffening ribs under multiple loading cases' in Computers and Structures, 78 (4), 637-647
LIU, Y-C. (2000) 'A methodology for the generation of concepts in mechanical design', PhD-thesis, Cambridge University Engineering Department
LIU, Y-C., CHAKRABARTI, A. and BLIGH, T.P. (2000) 'Further developments of Funcsion' in 6th International Conference on Artificial Intelligence in Design (AID'00), Worcester Polytechnic Institute, Massachusetts, USA, 499-519
MAINE, E. and ASHBY, M.F. (2000) 'Cost estimation and the viability of metal foams' in Advanced Engineering Materials, 2 (4), 205-209
MAINE, E.M.A. (2000) 'Innovation and adoption of new materials', PhD-thesis, Cambridge University Engineering Department
MATTHEWS, P.C., WALLACE, K.M. and BLESSING, L.T.M. (2000) 'Design heuristics extraction' in 6th International Conference on Artificial Intelligence in Design (AID'00), Worcester Polytechnic Institute, Massachusetts, USA, 1, 435-454
QINGFENG, H. and DONG, H. (2000) 'Success in times of paradox', Tongji Press, China
RODGERS, P.A., CALDWELL, H.H.M. and HUXOR, A.P. (2000) 'An Internet-based approach to the capture and reuse of knowledge in design' in Strategies for knowledge management
RODGERS, P.A., CALDWELL, N.H.M. and HUXOR, A.P. (2000) 'Writing and sharing of rule-text heuristics to support dispersed design communities' in Collaborative Design 2000, 431-438
RODGERS, P.A., CALDWELL, N.H.M., CLARKSON, P.J. and HUXOK, A.P. (2000) 'Managing knowledge in dispersed design companies facilitating context-driven design support through multiple perspectives' in 6th International Conference on Artificial Intelligence in Design (AID'00), Worcester Polytechnic Institute, Massachusetts, USA, 1, 147-167
ROY, R., DEL-REY-CHAMORRO, F.M., VAN WEGEN, B. and STEELE, A. (2000) 'A framework to create performance indicators in knowledge management' in 3rd International Conference on Practical Aspects of Knowledge Management (PAKM2000), Basel, Switzerland, 30-31
SIMONS, C.S. (2000) 'Change propagation in product design', MPhil-thesis, Cambridge University Engineering Department
SIMONS, C.S. and CLARKSON, P.J. (2000) 'Predicting change propagation in complex design', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR104
SIMONS, C.S., CLARKSON, P.J. and ECKERT, C.M. (2000) 'Managing change in complex design', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR105
SMITH, I., SHEA, K. and FEST, E. (2000) 'Computational control for active structures' in Advanced Technologies in Structural Engineering, Structures Congress, Philadelphia, USA, 1-8
SMITH, J. and CLARKSON, P.J. (2000) 'A method for the improved robustness of mechanical design' in Engineering Design Conference (EDC 2000), Brunel University, Uxbridge, UK, 555-562
STACEY, M.K. and ECKERT, C.M. (2000) 'Against ambiguity' in COOP 2000 Workshop on The Role of Objects in Design Co-operation: Communication through Physical or Virtual Objects, Sophia Antipolis, France, 69-86
STACEY, M.K. and ECKERT, C.M. (2000) 'Against ambiguity', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR95
STACEY, M.K., CLARKSON, P.J. and ECKERT, C.M. (2000) 'Signposting: an AI approach to supporting human decision making in design' in 2000 ASME Design Engineering Technical Conferences (DETC'00), University of Maryland, Baltimore, Maryland, USA,
SUPPAPITNARM, A., SEFFEN, K.A., PARKS, G.T. and CLARKSON, P.J. (2000) 'A simulated annealing algorithm for multiobjective optimization' in Engineering Optimization, 33 (1), 59-85
SUPPAPITNARM, A., SHEA, K., PARKS, G.T. and CLARKSON, P.J. (2000) 'Topological optimisation of bicycle frames using a structural shape grammar' in 2nd ASMO UK/ISSMO Conference on Engineering Design Optimization, University of Wales, Swansea, UK, 1, 211-218
SYMONS, D.D. (2000) 'Characterisation of indentation damage in 0/90 lay-up T300/914 CFRP' in Composites science and technology, 60 (3), 391-401
SYMONS, D.D. and DAVIS, G.R. (2000) 'Fatigue testing of impact-damaged T300/914 carbon-fibre-reinforced plastic' in Composites science and technology, 60 (3), 379-389
THAPA, B., GUPTA, S.P., BARAL, B. and MISHRA, D. (2000) 'Monitoring sound pressure level at different traffic areas of Kathmandu Valley and Kavre District and investigation of noise produced by transport vehicles' in Conference on State of Pollution, Tribhuvan University, Nepal,
VALE, C.A.W. and MEYER, P. (2000) 'A design technique for co-existing multimode waveguide bandstop filters' in IEEE MTT-S Int. Microwave Symposium, Boston, MA, 1189-1192
VALE, C.A.W. and MEYER, P. (2000) 'Waveguide chokes for microwave heating applications' in SATCAM 2000, Somerset West, South Africa,
WALLACE, K.M. (2000) 'Approaches to design' in Engineering Design Conference (EDC 2000), Brunel University, Uxbridge, UK, 807-810
WALLACE, K.M. (2000) 'Editorial' in Research in Engineering Design, 12 (1), 1
WALLACE, K.M. and BLESSING, L.T.M. (2000) 'Observations on some German contributions to engineering design' in Research in Engineering Design, 12 (1), 2-7
WEGST, U.G.K. and ASHBY, M.F. (2000) 'Environmentally-conscious materials selection and design of sports equipment' in The Engineering of Sport-Research Development and Innovation, , 521-531
WEGST, U.G.K. and ASHBY, M.F. (2000) 'The mechanical efficiency of natural materials and bionics: An introduction', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR103
YANG, X.Y., LIU, J-S., PARKS, G.T., CLARKSON, P.J. and XIE, Y-M. (2000) 'An investigation of the effect of element size on optimal topology design of 2D continua' in 2nd ASMO UK / ISSMO conference on Engineering Design Optimization, University of Wales, Swansea, UK, 1, 257-263

1999

AHMED, S., BLESSING, L.T.M. and WALLACE, K.M. (1999) 'The relationship between data, information and knowledge based on a preliminary study of engineering designers', Cambridge University, Engineering Department, Technical Report CUED/C-EDC/TR69
AHMED, S., BLESSING, L.T.M. and WALLACE, K.M. (1999) 'The relationship between data, information and knowledge based on a preliminary study of engineering designers' in 1999 ASME Design Engineering Technical Conferences (DETC'99), Las Vegas, Nevada, USA,
ALEXANDER, K.L. (1999) 'Design for validation of medical devices and equipment', PhD-thesis, Cambridge University Engineering Department
ALEXANDER, K.L., CLARKSON, P.J. and BISHOP, D. (1999) 'Design for validation of medical devices and equipment', Cambridge University Engineering Department, Technical Report / Workbook CUED/C-EDC/TR89
ALEXANDER, K.L., CLARKSON, P.J. and BISHOP, D. (1999) 'Observations on medical device design, Part II: Good practice' in Medical Device Technology, 10 (8), 24-28
ASHBY, M.F. (1999) 'Materials selection in mechanical design', Butterworth-Heinemann, 0750643579
ASHBY, M.F. (1999) 'Multi-objective optimisation in material design and selection', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR77
ASHBY, M.F. (1999) 'Materials selection in engineering design, vol 1 (2nd ed)', Butterworth-Heinemann, 0750643579
AURISICCHIO, M. (1999) 'Understanding and supporting design data capture in engineering design', MSc-thesis, Cambridge University Engineering Department
BAUMGRTNER, C. (1999) 'Collaboration between engineering consultants and their clients: characteristics of success', PhD-thesis, Cambridge University Engineering Department
BAUMGRTNER, C.E. and BLESSING, L.T.M. (1999) 'Characteristics of successful collaboration between engineering consultants and clients in the automotive industry' in 12th International Conference on Engineering Design (ICED'99), Munich, Germany, 2, 983 - 988
BAUMGRTNER, C.E. and BLESSING, L.T.M. (1999) 'A comparison of project planning in an Italian and a German company' in 12th International Conference on Engineering Design (ICED'99), Munich, Germany, 2, 959 - 964
BEN HMAIDA, I.A., CARTER, J.N., DE OLIVEIRA, C.R.E., GODDARD, A.J.H. and PARKS, G.T. (1999) 'Nuclear in-core fuel management optimization using the tabu search method' in Mathematics & Computation, Reactor Physics and Environmental Analysis in Nuclear Applications, Madrid, 2, 1658-1666
BLESSING, L.T.M. and YATES, I.R. (1999) 'Design and development capabilities of small and medium sized enterprises in the UK: an analysis.' in 12th International Conference on Engineering Design (ICED'99), Munich, Germany, 1, 119 -124
BRACEWELL, R.H. and JOHNSON, A.L. (1999) 'From embodiment generation to virtual prototyping' in 12th International Conference on Engineering Design (ICED'99), Munich, Germany, 2, 685 - 690
BRETON, B.C., CHAND, G., HOWARD, P.J., CALDWELL, N.H.M. and HOLBURN, D.M. (1999) 'NetSEM collaborator - an application in telemicroscopy' in Microscopy and Microanalysis, 5 (2), 320-321 (1431-9276)
CHAKRABARTI, A. (1999) 'A product design principle' in 12th International Conference in Engineering Design (ICED'99), Munich, Germany, 2, 751 - 756
CHAKRABARTI, A. (1999) 'Improving efficiency of procedures for compositional synthesis by using bi-directional search' in Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 15 (1), 67-80
CHAKRABARTI, A. and JOHNSON, A.L. (1999) 'Detecting side-effects in solution principles' in 12th International Conference on Engineering Design (ICED'99), Munich, Germany, 2, 661 - 666
CHAKRABARTI, A., MORGENSTERN, S. and KNAAB, H. (1999) 'Identification and application of requirements and their impact on design process: A protocol study', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR76
CHARLTON, C.T. (1999) 'The retrieval of mechanical design information', PhD-thesis, Cambridge University Engineering Department
CLARKSON, P.J., ALEXANDER, K.L. and BISHOP, D. (1999) 'Observations on medical device design, Part I: Current practice' in Medical Device Technology, 10 (7), 28-31
CLARKSON, P.J. and HAMILTON, J.R. (1999) '"Signposting" the design process' in 12th International Conference on Engineering Design (ICED'99), Munich, Germany, 1, 107 - 112
CLARKSON, P.J., BLESSING, L.T.M., SHEFELBINE, S. and EASON, S. (1999) 'Requirements capture' in Spring Medical Device Technology Conference, London, 1, 57-64
CLARKSON, P.J., CONNOR, A.M. and MELO, A.F. (1999) 'Signposting, a dynamic approach to design process management' in 16th International Joint Conference on Artificial Intelligence (IJCAI-99) Workshop on Workflow Management, Stockholm, Sweden, BUS-2,
CLARKSON, P.J., KEATES, S. and DOWLAND, R. (1999) 'The design and control of assistive devices' in 12th International Conference on Engineering Design (ICED'99), Munich, Germany, 1, 425 - 428
CLARKSON, P.J., MELO, A.F. and CONNOR, A.M. (1999) 'Signposting for design process improvement', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR84
CLARKSON, P.J., SEFFEN, K.A., PARKS, G.T., BAINBRIDGE, W.S. and HOOLEY, A. (1999) 'Observations on virtual collaborative design' in 12th International Conference on Engineering Design (ICED'99), Munich, Germany, 3, 1837 - 1840
CONNOR, A.M. (1999) 'A multi-thread tabu search algorithm' in Design Optimization: International Journal for Process and Product Improvement, 1 (3), 293-304
CONNOR, A.M. (1999) 'STARTright workshop report', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR78
CONNOR, A.M. (1999) 'Parameter sizing for fluid power circuits using Taguchi methods' in Journal of Engineering Design, 10 (4), 377-390
CONNOR, A.M., SEFFEN, K.A., PARKS, G.T. and CLARKSON, P.J. (1999) 'Efficient optimisation of structures using tabu search' in 1st ASMO/ISSMO Conference on Engineering Design Optimization, Ilkley, West Yorkshire, UK, 1, 127-134
DANIEL, J.H. (1999) 'Micromachining silicon for MEMS, vol 1 (1st ed)', MTP (145), 095351420X
DANIEL, J.H. and MOORE, D.F. (1999) 'A microaccelerometer structure with "tapping-mode" readout - fabriction in silicon-on-insulator using a focused ion beam process' in Sensors and Actuators A: Physical, 73, 201-209
ECKERT, C.M. (1999) 'Managing effective communication in knitwear design', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR70
ECKERT, C.M. (1999) 'The communication bottleneck in knitwear design: analysis and computing solutions', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR71
ECKERT, C.M. (1999) 'Managing effective communication in knitwear design' in Design Journal, 2 (3), 29-41 (1460-6925)
ECKERT, C.M. (1999) 'Computer support for early design in aesthetic design domains' in Cognitive Systems, 5 (3), 271-290
ECKERT, C.M. (1999) 'Sources of inspiration: a language of design', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR 72
ECKERT, C.M. and STACEY, M.K. (1999) 'Adaptation of sources of inspiration in knitwear design', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR80
ECKERT, C.M., CLARKSON, P.J. and ZANKER, W. (1999) 'Change and customisation in complex engineering domains', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR88
ECKERT, C.M., KELLY, I. and STACEY, M.K. (1999) 'Interactive generative systems for conceptual design: an empirical perspective' in Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 13 (4), 303-320 (0890-0604)
ECKERT, C.M., KELLY, I. and STACEY, M.K. (1999) 'Interactive generative systems for conceptual design: an empirical perspective', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR74
ECKERT, C.M., KELLY, I. and STACEY, M.K. (1999) 'Cognitive foundations for interactive generative systems in early design' in 12th International Conference on Engineering Design (ICED'99), Munich, Germany, 2, 1239-1242
ECKERT, C.M., STACEY, M.K. and WILEY, J. (1999) 'Expertise and designer burnout' in 12th International Conference on Engineering Design (ICED'99), Munich, Germany, 1, 195-200
ESAWI, A.M.K. and ASHBY, M.F. (1999) 'Cost estimation for process selection', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR68
ESAWI, A.M.K. and ASHBY, M.F. (1999) 'Cost estimation for process selection' in 1999 ASME Design Engineering Technical Conferences (DETC'99), Las Vegas, Nevada, USA,
ESAWI, A.M.K. and ASHBY, M.F. (1999) 'CPS: A software tool for selecting manufacturing processes' in 12th International Conference in Engineering Design (ICED'99), Munich, Germany, 1, 409 -412
FORTES, M.A. and ASHBY, M.F. (1999) 'The effect of non-uniformity of the in-plane modulus of honeycombs' in Acta Materialia, 47 (12), 3469-3473
HAMILTON, J.R. (1999) 'The capture and representation of knowledge to support adaptive aerospace design', PhD-thesis, Cambridge University Engineering Department
JOHNSON, K.W. (1999) 'Selection issues in product design of sports equipment', Cambridge University Engineering Department, First Year Report
JOHNSON, K.W., SHERCLIFF, H.R. and ASHBY, M.F. (1999) 'Design and selection tools for sports equipment', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR91
JOHNSON, K.W., SHERCLIFF, H.R. and ASHBY, M.F. (1999) 'New materials and processes in sports equipment design' in Organisation for the Applications of Science in Sports Conference (OASIS), Paris, France, 49-56
KEATES, S. and CLARKSON, P.J. (1999) 'Towards a generic approach for designing for all users' in Rehabilitation Engineering Society of North America (RESNA 99), Long Beach, CA, USA, 97-99
KEATES, S. and ROBINSON, P. (1999) 'Gestures and multimodal input' in Behaviour and Information Technology, 18 (1), 36-44
KEATES, S., CLARKSON, P.J. and ROBINSON, P. (1999) 'Gesture input and motion-impaired users', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR83
KEATES, S., CLARKSON, P.J. and ROBINSON, P. (1999) 'User modelling and motion-impaired users', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR82
KEATES, S., CLARKSON, P.J. and ROBINSON, P. (1999) 'A design approach for accessibility' in 8th International Conference on Human Computer Interaction (HCI99), Munich, Germany, 2, 878 - 882
KEATES, S., CLARKSON, P.J. and ROBINSON, P. (1999) 'Designing a usable interface for an interactive robot' in 6th International Conference on Rehabilitation Robotics (ICORR'99), Stanford University, Palo Alto, CA, USA, 156- 162
KEATES, S., CLARKSON, P.J., COY, J. and ROBINSON, P. (1999) 'Universal access in the work-place: A case study' in 5th European Research Consortium for Informatics and Mathematics Workshop (ERCIM) "User interfaces for all", Dagstuhl, Germany, 73-80
KELLAR, W.P. (1999) 'Geometry modelling in computational fluid dynamics', Cambridge University Engineering Department, First Year Report
KHANG, J.H.L. (1999) 'An investigation of embodiment modelling', PhD-thesis, Cambridge University Engineering Department
KLAUBERT, H.L., BURGESS, S.C., CLARKSON, P.J., DANIEL, J., KIRIYAMA, T., MOORE, D.F., SHIBAIKE, N. and UPTON, N.K. (1999) 'Microsystems technology (MST) design', Cambridge University Engineering Department, Technical Report (workbook) CUED/C-EDC/TR86
LANGDON, P.M. and CHAKRABARTI, A. (1999) 'Cluster-based browsing and visualisation of large mechanical design solution spaces' in 8th International Conference on Human Computer Interaction (HCI99), Munich, Germany, 93-94
LANGDON, P.M. and CHAKRABARTI, A. (1999) 'Browsing a large solution space in breadth and depth' in 12th International Conference in Engineering Design (ICED'99), Munich, Germany, 3, 1865 -1868
LIU, J-S., PARKS, G.T. and CLARKSON, P.J. (1999) 'Can a structure grow towards an optimum topology layout? - Metamorphic development: a new topology optimisation method.' in 3rd World Congress of Structural and Multidisciplinary Optimisation (WCSMO-3), Buffalo/Niagara Falls, New York, USA, (on CDRom)
LIU, J-S., PARKS, G.T. and CLARKSON, P.J. (1999) 'Topology optimisation of both trusses and continuum structures using a unified metamorphic development method' in 1st ASMO/ISSMO Conference on Engineering Design Optimization, Ilkley, West Yorkshire, UK, 1, 257-264
LIU, J-S., PARKS, G.T. and CLARKSON, P.J. (1999) 'Metamorphic development: a new topology optimisation method for truss structures' in 40th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, St. Louis, Missouri, USA, 3, 1578-1588
LIU, J-S., THOMPSON, G., CLARKSON, P.J. and PARKS, G.T. (1999) 'Design for structural performance by multi-factor optimisation' in 1st ASMO/ISSMO Conference on Engineering Design Optimization, Ilkley, West Yorkshire, UK, 1, 265-270
LIU, Y-C., CHAKRABARTI, A. and BLIGH, T.P. (1999) 'Transforming functional solutions into physical solutions' in 1999 ASME Design Engineering Technical Conferences (DETC'99), Las Vegas, Nevada, USA,
LIU, Y.- C., CHAKRABARTI, A. and BLIGH, T.P. (1999) 'A strategy for functional design' in 12th International Conference in Engineering Design (ICED'99), Munich, Germany, 2, 1187 -1190
LOVATT, A.M., BASSETTI, D., SHERCLIFF, H.R. and BRECHET, Y. (1999) 'Process and alloy selection for aluminium casting' in International Journal of Cast Metals Research, 12, 211-225
MAINE, E. and ASHBY, M.F. (1999) 'Cost estimation and the viability of metal foams', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR73
MAINE, E.M.A. and ASHBY, M.F. (1999) 'Cost estimation and the viability of metal foams' in International Conference on Metal Foams and Porous Metal Structures, Bremen, Germany, 1, 63-70
MALINGE, D. (1999) 'The mechanics and economics of optimised intelligent household waste recovery', PhD-thesis, Cambridge University Engineering Department
MALINGE, D. and LONG, P.J.G. (1999) 'Low-cost sorting of household plastics' in IdentiPlast, Brussels, Belgium,
MALINGE, D. and LONG, P.J.G. (1999) 'Sorting/compacting system for financially viable recovery-recycling' in Recovery recycling Re-Integration (R'99), Geneva, Switzerland, III, 334-339
MATTHEWS, P.C., BLESSING, L.T.M. and WALLACE, K.M. (1999) 'Conceptual evaluation using neural networks' in 12th International Conference in Engineering Design (ICED'99), Munich, Germany, 3, 1777 - 1780
McGOWAN, A., GREEN, G. and RODGERS, P.A. (1999) 'Information content in design sketches' in 4th Design Thinking Research Symposium: Design Representation, MIT, Cambridge, MA, USA, -
MELO, A.F. (1999) 'Dynamic design process planning', Cambridge University Engineering Department, First Year Report
MEYER, P. and VALE, C.A.W. (1999) 'The design of high performance finline tapers with vector based optimization' in IEEE MTT-S Int. Microwave Symposium, Anaheim, CA,
MIYAMOTO, R. (1999) 'Selection of joining processes for aluminium alloys', MPhil-thesis, Cambridge University Engineering Department
MIYAMOTO, R. and SHER CLIFF, H.R. (1999) 'Selection of joining processes for aluminium alloys', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR87
NIDAMARTHI, S. (1999) 'Understanding and supporting requirement satisfaction in the design process', PhD-thesis, Cambridge University Engineering Department
NIDAMARTHI, S. and SRIRAM, R.D. (1999) 'Observations from multidisciplinary internet-based collaboration on a practical design project' in 12th International Conference in Engineering Design (ICED'99), Munich, Germany, 2, 709 - 714
NIDAMARTHI, S., CHAKRABARTI, A. and BLIGH, T.P. (1999) 'Techniques for research method validation in protocol studies' in 12th International Conference in Engineering Design (ICED'99), Munich, Germany, 3, 1571 - 1576
PARKS, G.T. and SUPPAPITNARM, A. (1999) 'Multiobjective optimization of PWR reload core designs using simulated annealing' in Mathematics & Computation, Reactor Physics and Environmental Analysis in Nuclear Applications, Madrid, 2, 1435-1444
RAPHAEL, B., SHEA, K. and SMITH, I. (1999) 'A task and software independent CAE course' in Novel design and information technology applications for civil and structural engineering, Edinburgh, 39-46
RODGERS, P.A. and CLARKSON, P.J. (1999) 'An investigation and review of the knowledge needs of designers in SMEs' in Design Journal, 1 (3), 16-29
RODGERS, P.A. and HUXOR, A. (1999) 'Invited Editors of 'Distributed web-based AI design tools'' in Design Studies Journal,
RODGERS, P.A., BLESSING, L.T.M., CALDWELL, N.H.M. and HUXOR, A.P. (1999) 'Exploring the effectiveness of network-based tools in distributed conceptual design activity' in The continuum of design education. Proceedings of the 21st SEED Annual Design Conference and 6th National Conference on Product Design Education, 151-161
RODGERS, P.A., CALDWELL, N.H.M. and HUXOR, A.P. (1999) 'Authorship of WebCADET rule-bases to support distributed product development' in International Conference on Human Computer Interaction (HCI99), Munich, Germany, 177 - 178
RODGERS, P.A., CALDWELL, N.H.M., CLARKSON, P.J. and HUXOR, A.P. (1999) 'WebCADET: A knowledge support system for new product development' in 6th International Product Development Management Conference, Cambridge, UK, 2, 937-948
RODGERS, P.A., CALDWELL, N.H.M., HUXOR, A.P. and CLARKSON, P.J. (1999) 'Web-based design at the Cambridge Engineering Design Centre' in 12th International Conference in Engineering Design (ICED'99), Munich, Germany, 3, 1671 - 1674
RODGERS, P.A., CALDWELL, N.H.M., HUXOR, A.P. and CLARKSON, P.J. (1999) 'Handling design knowledge in emerging dispersed enterprises' in 12th International Conference in Engineering Design (ICED'99), Munich, Germany, 3, 1617 - 1622
RODGERS, P.A., HUXOR, A.P. and CALDWELL, N.H.M. (1999) 'Design support using distributed web-based AI design tools' in Research in Engineering Design, 11 (1), 31-44
RODGERS, P.A., HUXOR, A.P. and CALDWELL, N.H.M. (1999) 'DESRES: Towards a virtual design space' in 3rd European Academy of Design Conference: Design Cultures, Sheffield, UK, 2, 235-252
RODGERS, PA., McGOWAN, A. and GREEN, G. (1999) 'Using concept sketches to track design progress' in 4th Design Thinking Research Symposium: Design Representation, MIT, Cambridge, MA, USA, 1.89-1.108
ROQUES, A.C. (1999) 'Materials selection for medical applications', Certificate of Postgraduate Studies, Cambridge University Engineering Department
ROYER, C. (1999) 'Checking and estimating methods for materials data', Certificate of Postgraduate Studies, Cambridge University Engineering Department
SEFFEN, K.A. (1999) 'Bicycle-rider motion: equaitons of motion and control', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR79
SHEA, K. and CAGAN, J. (1999) 'Languages and semantics of grammatical discrete structures' in Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 13 (4), 241-251
SHEA, K. and CAGAN, J. (1999) 'The design of novel roof trusses with shape annealing: assessing the ability of a computational method in aiding structural designers with varying design intent.' in Design Studies, 20, 3-23
SHEA, K. and SMITH, I. (1999) 'Applying shape annealing to full-scale transmission tower re-design' in 1999 ASME Design Engineering Technical Conferences (DETC'99), Las Vegas, Nevada, USA, DETC99/DAC-8681, 1-9
SHEFELBINE, S., CLARKSON, P.J. and BLESSING, L.T.M. (1999) 'Requirements capture for medical devices', Cambridge University Engineering Department, Technical Report /Workbook CUED/C-EDC/TR90
SMITH, I. and SHEA, K. (1999) 'Extending active control to build intelligent structures' in Structures for the Future - The Search for Quality, IABSE Reports, Rio de Janeiro, Brazil, 83, 1057-1064
STACEY, M.K. and ECKERT, C.M. (1999) 'An ethnographic methodology for design process analysis' in 12th International Conference in Engineering Design (ICED'99), Munich, Germany, 3, 1565-1570
STACEY, M.K. and ECKERT, C.M. (1999) 'CAD system bias in engineering design' in 12th International Conference in Engineering Design (ICED'99), Munich, Germany, 3, 1413-1418
STACEY, M.K., CLARKSON, P.J. and ECKERT, C.M. (1999) 'Signposting: an AI approach to supporting human decision making in design', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR85
STACEY, M.K., ECKERT, C.M. and McFADZEAN, J. (1999) 'Sketch interpretation in design communication' in 12th International Conference in Engineering Design (ICED'99), Munich Germany, 2, 923-928
SUPPAPITNARM, A. (1999) 'A simulated annealing algorithm for multiobjective design optimization', MPhil-thesis, Cambridge University Engineering Department
SUPPAPITNARM, A. and PARKS, G.T. (1999) 'Simulated annealing: An alternative approach to true multiobjective optimization' in Genetic and Evolutionary Computation Conference (GECCO 1999), Orlando, Florida, Conference Workshop Program, 406-407
SUPPAPITNARM, A., SEFFEN, K.A., PARKS, G.T., CONNOR, A.M. and CLARKSON, P.J. (1999) 'Multiobjective optimisation of bicycle frames using simulated annealing' in 1st ASMO/ISSMO Conference on Engineering Design Optimization, Ilkley, West Yorkshire, UK, 1, 357-364
SUPPAPITNARM, A., SEFFEN, K.A., PARKS, G.T., LIU, J-S. and CLARKSON, P.J. (1999) 'Design by multi-objective optimisation using simulated annealing' in 12th International Conference in Engineering Design (ICED'99), Munich, Germany, 3, 1395 - 1400
THOMPSON, G., LIU, J-S-S. and HOLLAWAY, L. (1999) 'An approach to design for reliability' in Proceedings - Institution of Mechanical Engineers, Part E: Journal of Engineering Manufacture, 213, 61-67
UPTON, N.K. and BLESSING, L.T.M. (1999) 'Methods for evaluating engineering information technology' in 12th International Conference on Engineering Design (ICED'99), Munich, Germany, 1, 253 - 256
WALLACE, K.M. (1999) 'Developing a vision of engineering design in the future' in Keynote Address, 12th International Conference in Engineering Design (ICED'99), Munich, Germany, 3, 1665 -1670
WALLACE, K.M. and BLESSING, L.T.M. (1999) 'Visions for design research' in Critical enthusiasm: contributions to design science, 193-199
WALLACE, K.M. and BLESSING, L.T.M. (1999) 'An English perspective on the German contribution to engineering design' in Gedenkschrift Wolfgang Beitz, 583-593
WARD, J.R., CLARKSON, P.J. and BRACEWELL, R.H. (1999) 'Supporting medical device verification' in 12th International Conference on Engineering Design (ICED'99), Munich, Germany, 1, 429 - 432
WEGST, U.G.K. and ASHBY, M.F. (1999) 'The CIRAD-CMS woods database', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR75
WERNER, H. and AHMED, S. (1999) 'Design capturing with a modelling system using event triggered procedures' in 12th International Conference on Engineering Design (ICED'99), Munich, Germany, 2, 1011 - 1014
WOODCOCK, A. and RODGERS, P.A. (1999) 'Computer supported co-operative design: towards effective solutions' in ACM SIG-CHI 99 Workshop on Computer Supported Co-operative Design Extended Abstracts, Pittsburgh, PA, USA, 339

1998

AHMED, S. (1998) 'The capture and re-use of experience in engineering design', Cambridge University Engineering Department, First Year Report
ALEXANDER, K.L., CLARKSON, P.J. and BISHOP, D. (1998) 'Design for validation' in Autumn Medical Device Technology Conference 98, Paris, France, 119-126
ASHBY, M.F. (1998) 'Checks and estimates for material properties, 1: ranges and simple correlations' in Proceedings - Royal Society of London A, 454 (May - 1973), 1301-1321
BALL, N.R. and MATTHEWS, P.C. (1998) 'Active design support with a hierarchical blackboard' in 3rd International Conference on Adaptive Computing in Design and Manufacture, University of Plymouth, 58-61
BALL, N.R., MATTHEWS, P.C. and WALLACE, K.M. (1998) 'Managing conceptual design objects: An alternative to geometry' in International Conference on Artificial Intelligence in Design (AID'98), Instituto Superior Tecnico, Lisbon, Portugal, 67 - 86
BASSETTI, D., BRECHET, Y. and ASHBY, M.F. (1998) 'Estimates for material properties II: the method of multiple correlations' in Proceedings - Royal Society of London A, 454, 1323-1336
BAUMGRTNER, C.E. and BLESSING, L.T.M. (1998) 'Communication in engineering consultant - client collaborations - a case study' in Third Biennial World Conference on Integrated Design and Process Technology, Berlin, Germany, 5, 106-112
BLESSING, L.T.M. (1998) 'Product development in SMEs: P3I project, intermediate analysis results', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR81
BLESSING, L.T.M., CHAKRABARTI, A. and WALLACE, K.M. (1998) 'An overview of descriptive studies in relation to a general design research methodology' in Designers - the key to successful product development, 42-56
BURGESS, S.C. (1998) 'The ranking of efficiency of structural layouts using form factors: Part II: Design for strength' in Proceedings - Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 212 (2), 129-140
BURGESS, S.C. (1998) 'The ranking of efficiency of structural layouts using form factors: Part I: Design for stiffness' in Proceedings - Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 212 (2), 117-128
CALDWELL, N.H.M., BRETON, B.C. and HOLBURN, D.M. (1998) 'Making SEMs smarter' in Microscopy and Analysis, 9-11
CALDWELL, N.H.M., BRETON, B.C. and HOLBURN, D.M. (1998) 'Remote instrument diagnosis on the Internet' in IEEE Intelligent Systems, 13 (3), 70-76
CHAKRABARTI, A. (1998) 'A framework for browsing a solution space in depth and breadth', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR62
CHAKRABARTI, A. (1998) 'Improving efficiency of procedures for compositional synthesis using bi-directional search', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR65
CHAKRABARTI, A. (1998) 'Generation and exploration of conceptual design solutions on computers' in International Seminar and Workshops on Engineering Design in Integrated Product Development, Polish Academy of Sciences, Wroclaw, Poland,
CHAKRABARTI, A. (1998) 'Supporting two views of function in mechanical design' in 15th National Conference on Artificial Intelligence (AAAI'98), Wisconsin, Madison, USA,
CHAKRABARTI, A. (1998) 'A measure of the newness of a solution set generated using a database of building blocks, and the database parameters which control its newness', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR64
CHAKRABARTI, A. and BLIGH, T.P. (1998) 'Exploring basicness of building blocks for supporting innovative conceptual design using the building blocks metaphor', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR61
CHAKRABARTI, A. and BLIGH, T.P. (1998) 'A scheme for functional reasoning in conceptual design', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR60
CHANG, M., LEWINS, J.D. and PARKS, G.T. (1998) 'System reliability estimated variationally from Monte Carlo simulation' in 4th International Conference on Reliability & Quality in Design, Seattle, USA, 1, 92-96
CHARLTON, C.T. (1998) 'A web broker for mechanical component selection' in Inernational Conference on Artificial Intelligence in Design (AID'98) Workshop 2 on Distributed Web-based AI Design Tools, Instituto Superior Tecnico, Lisbon, Portugal,
CHARLTON, C.T. (1998) 'Product modelling for context-sensitive design retrieval' in Engineering Design Conference (EDC 1998), Brunel University, UK, 659-666
CHARLTON, C.T. and WALLACE, K.M. (1998) 'Concept induction from structured design fragments' in International Conference on Artificial Intelligence in Design Conference (AID'98) Workshop 4 Notes on Machine Learning in Design, Instituto Superior Tecnico, Lisbon, Portugal,
CHARLTON, C.T., BALL, N.R. and MATTHEWS, P.C. (1998) 'Towards mechanical design object re-use: The description, retrieval and classification of cases' in Artificial Intelligence in Design Conference (AID'98), Instituto Superior Tecnico, Lisbon, Portugal, 311-325
CHEN, W.J. (1998) 'A study into manufacturing information for engineering design', PhD-thesis, Cambridge University Engineering Department
CLARKSON, P.J. (1998) 'The Cambridge Engineering Design Centre' in Engineering Design Conference (EDC 1998), Brunel University, UK, 103-112
CLARKSON, P.J. (1998) 'Signposting in the performance playground' in 1998 Knowledge-Based Organization (KBO) Conference, San Diego, USA,
CLARKSON, P.J. and HAMILTON, J.R. (1998) 'Knowledge Modelling in Aerospace Design', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR66
CLARKSON, P.J. and KEATES, S. (1998) 'Design for all: designing for the motion-impaired user', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR67
COVINO, M.M., RODGERS, P.A., CLARKSON, P.J. and SMITH, J. (1998) 'Assessing reliability in mechanical systems' in 3rd World Conference on Integrated Design & Process Technology (IDPT), Berlin, Germany, 6, 120-130
DANIEL, J.H. (1998) 'MEMS: The fabrication of microsystems on silicon', PhD-thesis, Cambridge University Engineering Department
DANIEL, J.H., IQBAL, S., MILLINGTON, R.B., MOORE, D.F., LOWE, C.R., LESLIE, D.L., LEE, M.A. and PEARCE, M.J. (1998) 'Silicon microchambers for DNA amplification' in Sensors and Actuators A: Physical, 71, 81-88
DANIEL, J.H., MOORE, D.F. and WALKER, J.F. (1998) 'Focused ion beams for microfabrication' in Engineering Science and Education Journal, 7 (2), 53-56
DANIEL, J.H., MOORE, D.F. and WALKER, J.F. (1998) 'Focused ion beams and silicon-on-insulator - a novel approach to MEMS' in 4th ESSM and 2nd MIMR Conference, Harrogate, 585-591
DOWLAND, R.R., CLARKSON, P.J. and CIPOLLA, R. (1998) 'A prototyping strategy for use in interactive robotic system development' in Robotica, 16 (5), 517-521
ECKERT, C.M. and STACEY, M.K. (1998) 'Fortune favours only the prepared mind: why sources of inspiration are essential for continuing creativity' in Creativity and Innovation Management, 7 (9-16)
ECKERT, C.M., CROSS, N.G. and JOHNSON, J.H. (1998) 'Intelligent support for communication difficulties in conceptual design' in Lancaster International Workshop on Engineering Design, Lancaster, UK,
ESAWI, A.M.K. and ASHBY, M.F. (1998) 'The development and use of a software tool for selecting manufacturing processes at the early stages of design.' in 3rd Biennial World Conference on Integrated Design & Process Technology (IDPT), Berlin, Germany, 3, 210-217
ESAWI, A.M.K. and ASHBY, M.F. (1998) 'Computer-based selection of manufacturing processes: methods, software and case studies.' in Proceedings - Institute of Mechanical Engineers, Part B: Engineering Manufacture, 212 (B8), 595-610
ESAWI, A.M.K. and ASHBY, M.F. (1998) 'Cost-based ranking for manufacturing process selection' in 2nd International Conference on Integrated Design and Manufacturing in Mechanical Engineering (IDMME 98), Compigne, France, IV, 1001-1008
EVANS, A.G., HUTCHINSON, J.W. and ASHBY, M.F. (1998) 'Cellular metals' in Current Opinion in Solid State and Material Science, 3 (3), 288-303
FU, T-T. (1998) 'An investigation of heavy vehicle suspension design', PhD-thesis, Cambridge University Engineering Department
FU, T-T. and CEBON, D. (1998) 'A survey of trailer suspension operators', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR63
HESS, A. (1998) 'Acoustic properties of metal foams', Certificate of Postgraduate Studies, Cambridge University Engineering Department
JARRETT, J.P. (1998) 'Design support for turbomachinery', Cambridge University Engineering Department, First Year Report
JOHNSON, A.L. (1998) 'An open architecture approach to kinematic analysis for computer-aided embodiment design' in Computer-Aided Design, 30 (3), 199-204
KEATES, S. and ROBINSON , P. (1998) 'The use of gesture in multimodal input' in 3rd International ACM Conference on Assistive Technologies (ASSETS 1998), Los Angeles, CA, USA, 35-42
KEATES, S. and ROBINSON, P. (1998) 'The use of gestures in multimodal input' in 3rd International ACM Conference on Assistive Technologies, Marina del Rey, CA, USA, 35-42
KEATES, S., CLARKSON, P.J. and ROBINSON, P. (1998) 'Developing a methodology for the design of accessible interfaces' in 4th European Research Consortium for Informatics and Mathematics Workshop (ERCIM) "User interfaces for all", Stockholm, Sweden, 1-15
KLAUBERT, H.L.L. (1998) 'Tiny design: a study of the design of microelectromechanical systems', PhD-thesis, Cambridge University Engineering Department
LEWINS, J.D., PARKS, G.T. and CHANG, M. (1998) 'A variational principle using Monte Carlo approximations for reliability studies' in 4th International Conference on Reliability & Quality in Design, Seattle, USA, 1, 302-309
LIU, J-S.- S. and HOLLAWAY, L. (1998) 'Integrated structure-electromagnetic optimization of large reflector antenna systems' in Structural Optimization, 16 (1), 29-36
LIU, Y-C. (1998) 'An investigation of concept generation and evaluation for mechanical design', Cambridge University Engineering Department, First Year Report
LOVATT, A.M. and SHERCLIFF, H.R. (1998) 'Manufacturing process selection in engineering design: Part 2 - A methodology for creating task-based process selection procedures' in Materials and Design, 19, 217-230
LOVATT, A.M. and SHERCLIFF, H.R. (1998) 'Manufacturing process selection in engineering design: Part 1 - The rle of process selection' in Materials and Design, 19, 205-215
MAINE, E.M.A. (1998) 'Innovation and adoption of new materials: A case study of metal foams', Cambridge University Engineering Department, First Year Report
MATTHEWS, P.C. (1998) 'Using a guideline database to support design emergence: A proposed system based on a designers's workbench' in International Conference on Artificial Intelligence in Design (AID'98) Workshop on Emergence in Design, Instituto Superior Tecnico, Lisbon, Portugal, 13 - 18
MATTHEWS, P.C. (1998) 'Preliminary evaluation of conceptual mechanical designs', Cambridge University Engineering Department, First Year Report
McGOWAN, A., GREEN, G. and RODGERS, P.A. (1998) 'Visible ideas: information patterns of conceptual sketch activity' in Design Studies, 19 (4), 431-453
NIDAMARTHI, S., ALLEN, R.H., RAO, P.V.M., RHOREV, R., SRIRAM, R.D. and TEAGUE, E.C. (1998) 'Collaborating on the design and manufacture of an atomic artifact transport system: A case study in VRML as a visualisation tool for consensus building' in 1998 ASME Design Engineering Technical Conferences (DETC'98), Atlanta, USA,
PARKS, G.T. and MILLER, I. (1998) 'Selective breeding in a multiobjective genetic algorithm' in 5th International Conference on Parallel Problem Solving from Nature (PPSN V), Amsterdam, The Netherlands, 1, 250-259
RODGERS, P.A. and CLARKSON, P.J. (1998) 'Knowledge usage in new product development' in International Conference on Design and Technology Educational Research and Curriculum Development (IDATER 98), Loughborough University, 252-258
RODGERS, P.A. and HUXOR, A.P. (1998) 'The role in design of artificial intelligence as authored text' in Design Studies, 19 (2), 143-160
RODGERS, P.A. and HUXOR, A.P. (1998) 'Designing over networks: A review and example of using internet collaboration and communication tools in design' in Managing new product innovation. Proceedings of the Conference of the Design Research Society : Quantum leap, managing new product innovation, University of Central England, UK, 131-142
RODGERS, P.A., CLARKSON, P.J., CALDWELL, N.H.M. and HUXOR, A.P. (1998) 'Supporting 'intelligent' navigation of design knowledge' in 1998 Lancaster International Workshop on Engineering Design (CACD'98), University of Lancaster, 123-147
RODGERS, P.A., HUXOR, A.P., CLARKSON, P.J. and CALDWELL, N.H.M. (1998) 'Knowledge systems as navigation aids to online content and users' in International Conference on Artificial Intelligence in Design (AID'98) Workshop on Distributed Web-based AI Design Tools, Instituto Superior Tecnico, Lisbon, Portugal,
SAUVAGE, C., LOVATT, A.M. and SHERCLIFF, H.R. (1998) 'Development of selection methods for steels and their heat treatments', Cambridge University Engineering Department, Technical Report CUED/C-MATS/TR248
SEFFEN, K.A., PELLEGRINO, S. and PARKS, G.T. (1998) 'Deployment of a panel by tape-spring hinges' in IUTAM-IASS Symposium on Deployable Structures, Cambridge University Engineering Department, 355-364
SHEA, K. and CAGAN, J. (1998) 'Generating structural essays from languages of discrete structures' in Artificial Intelligence in Design Conference (AID'98), Instituto Superior Tecnico, Lisbon, Portugal, 365-384
SHEFELBINE, S.J. (1998) 'Requirements capture for medical device design', MSc-thesis, Cambridge University Engineering Department
SMITH, J. (1998) 'Design for reliability in mechanical systems', Cambridge University Engineering Department, First Year Report
SUPPAPITNARM, A. (1998) 'Optimization of bicycle design', Cambridge University Engineering Department, First Year Report
TAN, K.T. and BLIGH, T.P. (1998) 'A new approach to an integrated CAD method for surface ship design' in Naval Engineers Journal, , 35-48
WARD, J.R. (1998) 'A methodology for supporting medical device verification', Cambridge University Engineering Department, First Year Report
WEGST, U.G.K. and ASHBY, M.F. (1998) 'The development and use of a methodology for the environmentally-conscious selection of materials' in 3rd Biennial World Conference on Integrated Design and Process Technology (IDPT), Berlin, Germany, 5, 88-93
WEGST, U.G.K. and ASHBY, M.F. (1998) 'Eco-criteria for materials selection' in Engineering Designer, 24 (2), 8-12
WEGST, U.G.K. and ASHBY, M.F. (1998) 'Mechanical efficiency and structural optimisation of natural materials' in 4th International Congress of the Society for Technical Biology and Bionics, Munich, Germany, Biona Report 12, 75-82
WEGST, U.G.K. and ASHBY, M.F. (1998) 'Environmentally-conscious design and materials selection' in 2nd International Conference on Integrated Design and Manufacturing in Mechanical Engineering (IDMME'98), Compigne, France, 3, 913-920

1997

ALEXANDER, K.L. and CLARKSON, P.J. (1997) 'Design for validation of medical devices and equipment' in 11th International Conference on Engineering Design (ICED'97), Tampere, Finland, 3, 137-142
ASHBY, M.F. (1997) 'Materials selection: multiple constraints and compound objectives' in Computerization and networking of materials databases: 5th volume, STP1311, 45-62
BAUMGRTNER, C.E. (1997) 'An investigation into the information exchange between a consultant and client company: a case study', Cambridge University Engineering Department, First Year Report
BLESSING, L.T.M. (1997) 'A method for identifying scope and assumptions in developing and selecting methods and tools', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR37
BLESSING, L.T.M. and BALL, N.R. (1997) 'Implementation and evaluation of a process-based approach to design' in 11th International Conference on Engineering Design (ICED'97), Tampere, Finland, 2, 271-276
BLESSING, L.T.M. and UPTON, N.K. (1997) 'A methodology for preliminary design of mechanical aircraft systems' in World Aviation Congress, Anaheim, California, SAE 975537,
BLESSING, L.T.M., UPTON, N.K., BURGESS, S.C., CHAKRABARTI, A., NOWACK, M.L., JOHNSON, A.L. and WEAVER, P.M. (1997) 'Applying systematic design: The flight refuelling probe project', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR48
BRETON, B.C., CALDWELL, N.H.M. and HOLBURN, D.M. (1997) 'Remote microscopy in the real world' in Microscopy and Microanalysis, , 19-21
BURGESS, S.C. and CLARKSON, P.J. (1997) 'The development of a novel rotary damping mechanism for aerospace deployment systems' in Materials and Design, 18 (1), 17-24
BURGESS, S.C. and WEAVER, P.M. (1997) 'An international workshop on shape and material optimisation of structures', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR54
BURGESS, S.C., MOORE, D.F., NEWLAND, D.E. and KLAUBERT, H.L. (1997) 'A study of mechanical configuration optimisation in micro-systems.' in Research in Engineering Design, 9, 46-60
CALDWELL, N.H.M., BRETON, B.C. and HOLBURN, D.M. (1997) 'FIRST A.I.D. : using remote microscopy and artificial intelligence for SEM fault diagnosis' in Scanning: The Journal of Scanning Microscopies, 19 (3), 204
CALDWELL, N.H.M., BRETON, B.C. and HOLBURN, D.M. (1997) 'Towards the intelligent SEM' in Electron microscopy and analysis 1997. Proceedings of the Institute of Physics Electron Microscopy and Analysis Group Conference, University of Cambridge, UK, 53-56
CALDWELL, N.H.M., BRETON, B.C. and HOLBURN, D.M. (1997) 'XpertEze : a knowledge-based approach to scanning electron microscopy' in Applications and innovations in expert systems V. Proceedings of the Expert Systems '97 Conference, Churchill College, Cambridge, UK, 127-140
CEBON, D. and ASHBY, M.F. (1997) 'The optimal selection of engineering entities', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR59
CHAKRABARTI, A. (1997) 'Reasoning with shapes: a case study' in Annual Meeting of the CAD Group, Japan Society of Mechanical Engineers, Tokyo, Japan,
CHAKRABARTI, A. (1997) 'Supporting deep understanding and problem solving using function structures: A case study' in 11th International Conference on Engineering Design (ICED'97), Tampere, Finland, 3, 71-76
CHAKRABARTI, A., JOHNSON, A.L. and KIRIYAMA, T. (1997) 'An approach to automated synthesis of solution principles for micro-sensor designs' in 11th International Conference on Engineering Design (ICED'97), Tampere, Finland, 2, 125-128
CHAND, G., BRETON, B.C., CALDWELL, N.H.M. and HOLBURN, D.M. (1997) 'World Wide Web controlled scanning electron microscope' in Scanning: The Journal of Scanning Microscopies, 19 (4), 292-296
CHARLTON, C.T., NOWACK, M.L. and WALLACE, K.M. (1997) 'Engineering design guideline support scheme' in 11th International Conference on Engineering Design (ICED'97), Tampere, Finland, 2, 657-660
CLARKSON, P.J. (1997) 'Design and development of medical devices' in Management Forum, London, UK,
CLARKSON, P.J. (1997) '2nd annual conference on auto-injectors and pen injectors' in Management Forum, London, UK,
CLARKSON, P.J., DOWLAND, R.R. and CIPOLLA, R. (1997) 'The use of prototypes in the design of interactive machines' in 11th International Conference on Engineering Design (ICED'97), Tampere, Finland, 2, 735-740
DANIEL, J.H., IQBAL, S., MILLINGTON, R.B., MOORE, D.F., LOWE, C.R., LESLIE, D., LEE, M. and PEARCE, M. (1997) 'Micro-PCR device for fast thermal cycling' in IBC's 2nd Annual Conference on Microfabrication & Microfluidic Technologies, San Francisco, CA, USA,
DANIEL, J.H., MOORE, D.F., WALKER, J.F. and WHITNEY, J.T. (1997) 'Focused ion beams in microsystem fabrication' in Microelectronics Engineering. An International Journal of Semiconductor Manufacturing Technology including Nanoelectronic Engineering, (35), 431-434
DOWLAND, R.R., CLARKSON, P.J. and CIPOLLA, R. (1997) 'A prototype for interactive robotics application development' in 5th International Conference on Rehabilitation Robotics (ICORR 97), University of Bath, 1, 71-74
ESAWI, A.M.K. and ASHBY, M.F. (1997) 'Computer-based selection of manufacturing processes', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR50
ESAWI, A.M.K. and ASHBY, M.F. (1997) 'Computer-based selection of manufacturing processes' in 11th International Conference on Engineering Design (ICED'97), Tampere, Finland, 2, 571-574
ESAWI, A.M.K. and ASHBY, M.F. (1997) 'Systematic process selection in mechanical design: a summary', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR 51
FU, T.T. and CEBON, D. (1997) 'Evaluating designs through life costing' in 11th International Conference on Engineering Design (ICED'97), Tampere, Finland, 2, 525-528
GIBSON, L.J. and ASHBY, M.F. (1997) 'Cellular solids: structure and properties (2nd ed)', Cambridge University Press, 0521499119
HALLETT, S.R. and SYMONS, D.D. (1997) 'Testing and modelling of impact failure mechanisms in carbon fibre' in NAFEMS World Congress, Stuttgart, Germany,
HAMILTON, J.R., CLARKSON, P.J. and BURGESS, S.C. (1997) 'The modelling of design knowledge for computer supported aerospace design' in 11th International Conference on Engineering Design (ICED'97), Tampere, Finland, 1, 235-240
HARMER, Q.J. (1997) 'Design for low-volume production', PhD-thesis, Cambridge University Engineering Department
HUBER, J., FLECK, N.A. and ASHBY, M.F. (1997) 'The selection of mechanical actuators based on performance indices' in Proceedings - Royal Society of London A, 453, 2185-2205
KEATES, S. (1997) 'Computer interaction for motion-impaired users', PhD-thesis, Cambridge University Engineering Department
KEATES, S. and DOWLAND, R. (1997) 'User modelling and the design of computer-based assistive devices' in IEE Colloquium on "Computers in the service of mankind: helping the disabled", London, IEE Colloquium Digest 97/117, 9/1-9/3
KEATES, S. and ROBINSON, P. (1997) 'The role of user modelling in rehabilitation robotics' in International Conference on Rehabilitation Robotics (ICORR '97), Bath, UK, 75-78
KEATES, S. and ROBINSON, P. (1997) 'User performance modelling and cognitive load' in Rehabilitation Engineering Society of North America (RESNA 97), Pittsburgh, USA, 342-344
KEATES, S., POTTER, R., PERRICOS, C. and ROBINSON, P. (1997) 'Gesture recognition - research and clinical perspectives' in Rehabilitation Engineering Society of North America (RESNA 97), Pittsburgh, USA, 333-335
KHANG, J.H.L. and WALLACE, K.M. (1997) 'Embodiment modelling with parameter trees' in 11th International Conference on Engineering Design (ICED'97), Tampere, Finland, 2, 77-80
KITCHING, K.J. (1997) 'Semi-active damping of heavy vehicles', PhD-thesis, Cambridge University Engineering Department
KLAUBERT, H.L.L. and BLESSING, L.T.M. (1997) 'An analysis of tiny design: design process for MicroElectroMechanical Systems (MEMS)' in 11th International Conference on Engineering Design (ICED'97), Tampere, Finland, 2, 405-410
MALINGE, D. (1997) 'Design of sorting methods for household wastes', Cambridge University Engineering Department, First Year Report
MARSH, J.R. (1997) 'The capture and structure of design experience', PhD-thesis, Cambridge University Engineering Department
MARTIN, G.C., HOLBURN, D.M., CALDWELL, N.H.M. and BRETON, B.C. (1997) 'Virtual SEM (VSEM): evaluation of a SEM teaching and training tool' in Microscopy and Microanalysis, 13 (2)
MOORE, D.F., DANIEL, J.H. and WALKER, J.F. (1997) 'Nano- and micro technology applications of focused ion beam processing' in Microelectronics Journal, 28, 465-473
MURDOCH, T.N.S., BALL, N.R. and MATTHEWS, P.C. (1997) 'Constraint based templates for design re-use' in 11th International Conference on Engineering Design (ICED'97), Tampere, Finland, 3, 267-270
NIDAMARTHI, S. (1997) 'Evaluation report on requirements-based support tools for the designer', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR49
NIDAMARTHI, S., CHAKRABARTI, A. and BLIGH, T.P. (1997) 'On the significance of co-evolving requirements and solutions in the design process' in 11th International Conference on Engineering Design (ICED'97), Tampere, Finland, 1, 227-230
NOWACK, M.L. (1997) 'Guideline use in various disciplines', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR52
NOWACK, M.L. (1997) 'Design guidelines for manufacturability', PhD-thesis, Cambridge University Engineering Department
NOWACK, M.L., RODGERS, P.A., CHARLTON, C.T. and WALLACE, K.M. (1997) 'Design support with ergonomic guidelines' in 12th International Occupational Ergonomics and Safety Conference '97, Washington DC, USA, 207-210
PARKS, G.T. (1997) 'Multiobjective pressurised water reactor reload core design using a genetic algorithm' in 3rd International Conference on Artificial Neural Networks and Genetic Algorithms (ICANNGA'97), Norwich, 1, 53-57
PARKS, G.T. and KNIGHT, M.P. (1997) 'A comparison of PANTHER loading pattern optimization search options' in American Nuclear Society Topical Meeting on Advances in Nuclear Fuel Management II, Myrtle Beach, South Carolina, 1, 67-74
RODGERS, P.A. (1997) 'The capture and retrieval of design information: an investigation of the information needs of British Telecom designers', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR58 (incomplete)
RODGERS, P.A. and HUXOR, A.P. (1997) 'Towards a WWW-based KBS design resource' in Irish Manufacturing Conference, Trinity College, Dublin, 125-133
RODGERS, P.A., HAMILTON, J.R. and CLARKSON, P.J. (1997) 'A vision of the engineering design environment of the future' in Irish Manufacturing Committee (IMC-14), Trinity College, Dublin, 1, 525-533
SCORSONE, F. (1997) 'The design of a waste sorting machine', PhD-thesis, Cambridge University Engineering Department
SEFFEN, KA. (1997) 'Analysis of structures deployed by tape springs', PhD-thesis, Cambridge University Engineering Department
TANG, M.X. (1997) 'An architecture for design collaboration management' in Workshop on Formal Aspects of Collaborative CAD, Sydney, Australia,
TANG, M.X. and WALLACE, K.M. (1997) 'A knowledge-based approach to CAD system integration' in 11th International Conference on Engineering Design (ICED'97), Tampere, Finland, 2, 185-190
UPTON, N. (1997) 'Clarifying the business value of computer-based tools' in 11th International Conference on Engineering Design (ICED'97), Tampere, Finland, 3, 283-288
UPTON, N.K., BLESSING, L.T.M., CANTAMESSA, M., SCHABACKER, M. and VAJNA, S. (1997) 'Proceedings of an International Workshop on 'The value of computer-based engineering tools'', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR53
WALLACE, K.M. (1997) 'Experience of using design competitions to motivate students' in 19th Annual Design Conference, Attracting and Motivating Engineering Students Through Design, The University of Hull,
WALLACE, K.M., MATHESON, J.M.R., HOGUE, C. and ISGROVE, D.W. (1997) 'Three years experience of running the integrated design project at Cambridge' in 11th International Conference on Engineering Design (ICED'97), Tampere, Finland, 3, 407-410
WATERMAN, N. and ASHBY, M.F. (1997) 'The Chapman and Hall material selector, 3 vols', Chapman and Hall
WEAVER, P.M. (1997) 'Workshop on materials and shape optimisation for structure', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR 54
WEAVER, P.M. and ASHBY, M.F. (1997) 'Material limits for shape efficiency' in Progress in Materials Science, 41, 61-128
WEAVER, P.M. and ASHBY, M.F. (1997) 'An overview of material limits for shape efficiency', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR57
WEGST, U.G.K. and ASHBY, M.F. (1997) 'A database of the engineering properties of woods and its application', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR56
WEGST, U.G.K. and ASHBY, M.F. (1997) 'Material selection charts for natural materials', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR55
YAO, Z. and JOHNSON, A.L. (1997) 'A constraint-based environment for mechanical design' in 11th International Conference on Engineering Design (ICED'97), Tampere, Finland, 3, 257-260
YAO, Z. and JOHNSON, A.L. (1997) 'The application of empirical constraints in the design process' in 11th International Conference on Engineering Design (ICED'97), Tampere, Finland, 3, 213-218
YAO, Z. and JOHNSON, A.L. (1997) 'On estimating the feasible solution space of design' in Computer-Aided Design, 29 (9), 649-655

1996

AITCHISON, J.M. and UPTON, N.K. (1996) 'Solution of constrained nonlinear equations in modelling the release of liquefied gases' in Journal of Computational and Applied Mathematics, 67 (1), 1-14
ALEXANDER, K.L. (1996) 'Design for validation of medical devices and equipment', Cambridge University Engineering Department, First Year Report
ASHBY, M.F. (1996) 'Modelling of materials problems' in Journal of Computer-Aided Materials Design, 3, 95-99
ASHBY, M.F. (1996) 'Checks and estimates for material properties', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR32
ASHBY, M.F. (1996) 'Materials selection: multiple constraints and compound objectives', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR38
ASHBY, M.F. and CEBON, D. (1996) 'Case studies in materials selection', Granta Design Ltd., 0750636041
ASHBY, M.F. and JONES, D.R.H. (1996) 'Engineering materials 1, vol 1 (2nd ed)', Butterworth-Heineman (295), 0750627662
ASHBY, M.F., BRECHET, Y., DUPEAUX, M. and LUCHET, F. (1996) 'Choix et usage des mat©riaux' in Techniques de l'engenieur, T-5-100, 1-23
ASHBY, M.F., BURGESS, S.C., SHIBAIKE, N. and WEAVER, P.M. (1996) 'Selection of materials to reduce environmental impact: a case study on refrigerator insulation' in Materials and Design, 17 (1), 11-18
BALL, N.R. (1996) 'Application of a neural network based classifier system to AGV obstacle avoidance' in Mathematics and Computers in Simulation, 41 (3-4), 285-296
BALL, N.R. (1996) 'Representation of obstacles in a neural network bases classifier system' in European Symposium on Artificial Neural Networks (ESANN'96), Bruges, 155-160
BALL, N.R. (1996) 'Supporting the EDC product model using QuickTrieve', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR22
BALL, N.R., MURDOCH, T.N.S. and WALLACE, K.M. (1996) 'A framework for design object evolution' in 4th International Conference on Artificial Intelligence in Design (AID'96), Stanford University, CA, USA, 77-96
BASSETTI, D., BRECHET, Y. and ASHBY, M.F. (1996) 'Estimates for material properties: the method multiple correlations', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR33
BLESSING, L.T.M. (1996) 'Comparison of design models proposed in prescriptive literature' in The role of design in the shaping of technology (COST A3/A4), 127-212
BLESSING, L.T.M. (1996) 'Design Process Capture and Support' in 2nd WDK Workshop on Product Structuring, Delft, The Netherlands, 109-121
BRECHET, Y., ASHBY, M.F., DUPEAUX, M. and LOUCHET, F. (1996) 'La s©lection des mat©riaux et des proc©d©s' in Mat©riaux et Techniques, 1-2, 26-32
BRETON, B.C., CALDWELL, N.H.M. and HOLBURN, D.M. (1996) 'A Java Powered SEM' in EUREM-11, Dublin, 1: Techniques and Instrumentation, 356
BURGESS, S.C. (1996) 'The rating of efficiency of structural layouts using form factors, Part I: design for stiffness', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR43
BURGESS, S.C. (1996) 'The optimisation of performance of a new damping mechanism.' in 4th Symposium on Design, Hrvatska, Croatia, 11-18
BURGESS, S.C. (1996) 'The Computational Design of poles for pole vaulting' in 1st International Conference on the Engineering of Sport, Sheffield, 83-90
BURGESS, S.C. (1996) 'The rating of efficiency of structural layouts using form factors, Part II: design for strength', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR44
BURGESS, S.C. (1996) 'The design and analysis of a novel rotary damping mechanism' in 7th International Machine Design and Production Conference, Ankara, Turkey, 905-914
BURGESS, S.C. (1996) 'The design optimisation of a novel rotary damper' in 4th Symposium on Design, Hrvatska, Croatia, 11-18
BURGESS, S.C., MOORE, D.F., NEWLAND, D.E. and KLAUBERT,H.L. (1996) 'A study of configuration optimisation in micro-systems', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR35
CALDWELL, N.H.M., BRETON, B.C. and HOLBURN, D.M. (1996) 'An expert system for fault diagnosis in the scanning electron microscope' in Applications and innovations in expert systems IV. Proceedings of the Expert Systems '96 Conference, Cambridge, UK, 177-188
CALDWELL, N.H.M., BRETON, B.C. and HOLBURN, D.M. (1996) 'Automated filament saturation in the SEM' in Royal Microscopical Society, 31, 126
CEBON, D. and ASHBY, M.F. (1996) 'Database user's manuals for CMS 2.0: Polymers vI.0 (1994), Light Alloys vI.0 (1994), Metal Matrix Composites vI.0 (1994), Copper Alloys vI.0 (1994), Conductors1.0 (1995), Foams v1.0 (1996), Ferrous Metals v1.0 (1996)', Granta Design Ltd.
CEBON, D., BESINGER, F.H. and COLE, D.J. (1996) 'Control strategies for semi-active lorry suspensions' in Proceedings - Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 210 (2), 161-178
CHAKRABARTI, A. and BLESSING, L.T.M. (1996) 'Special Issue: Representing functionality in design' in Artificial Intelligence for Engineering Design, Analysis and Manufacture, 10 (4), 251-253
CHAKRABARTI, A. and BLIGH, T.P. (1996) 'An approach to functional synthesis of solutions in mechanical conceptual design. Part II: Kind synthesis' in Research in Engineering Design, 8 (1), 52-62
CHAKRABARTI, A. and BLIGH, T.P. (1996) 'An approach to functional synthesis of solutions in mechanical conceptual design. Part III: Spatial configuration' in Research in Engineering Design, 8 (2), 116-124
CHAKRABARTI, A. and BLIGH, T.P. (1996) 'An approach to functional synthesis of mechanical design concepts: theory, application and emerging research issues' in Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 10 (4), 313-332 (0890-0604)
CHAKRABARTI, A. and TANG, M.X. (1996) 'Generating conceptual solutions on FuncSION: evolution of a functional synthesiser' in 4th International Conference on Artificial Intelligence in Design (AID'96), Stanford University, CA, USA, 603-622
CHAND, G., BRETON, B.C., CALDWELL, N.H.M. and HOLBURN, D.M. (1996) 'World Wide Web controlled SEM' in Scanning: The Journal of Scanning Microscopies, 18 (3), 201-202
CHARLTON, C.T. and BALL, N.R.R. (1996) 'Case retrieval using associative networks' in Adaptive Computing in Engineering Design and Control (ACEDC'96), Plymouth, 71-78
CLARKSON, P.J. (1996) 'The role, importance and regulatory requirements of the design of medical devices' in Management Forum, London, UK,
COLE, D.J. and CEBON, D. (1996) 'Truck suspension design to minimise road damage' in Proceedings - Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 210 (D2), 95-107 (IMechE Crompton Lanchester Award and IMechE Thomas Hawksley Gold Medal)
DWARAKANATH, S. (1996) 'Understanding and supporting decision making in engineering design', PhD-thesis, Cambridge University Engineering Department
DWARAKANATH, S. and BLESSING, L.T.M. (1996) 'Ingredients of the design process: a comparison between group and individual work' in Analysing design activity, 93-116
ESAWI, A.M.K. and ASHBY, M.F. (1996) 'Systematic process selection in mechanical design' in 1996 ASME Design Engineering Technical Conferences (DETC'96), Irvine, California, USA,
HAMILTON, J.R., CLARKSON, P.J.J., BURGESS, S.C. and NEWLAND, D.E. (1996) 'The development of a knowledge based system to aid helicopter rotor blade design' in The 20th Congress of the International Council of the Aeronautical Sciences (ICAS), Sorrento, Italy, 1, 619-630
HARMER, Q.J. (1996) 'Selecting standard components in a low-volume design project - a case study', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR46
HARMER, Q.J. (1996) 'Selection charts for rolling element bearing', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR47
HARMER, Q.J. and WALLACE, K.M. (1996) 'Design with transferred components', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR42
HARMER, Q.J., WEAVER, P.M. and WALLACE, K.M. (1996) 'Design-led component selection' in Computer-Aided Design, 30 (5), 391-405
HOGUE, C., BERNASCONI, D. and FANDRICH, M. (1996) 'Experimental studies of rigid body collisions in 3-D' in 19th International Congress of Theoretical and Applied Mechanics, Kyoto, Japan,
KEATES, S. (1996) 'Multi-modal computer access in rehabilitation applications', Cambridge University Engineering Department, First Year Report
KEATES, S. and PERRICOS, C. (1996) 'Gesture as a means of computer access' in Communication Matters, 10 (1), 17-19
KHANG, J.H.L., BURGESS, S.C. and WALLACE, K.M.M. (1996) 'Product design using parameter-tree analysis' in 4th Symposium DESIGN 96, Hrvatska, Croatia, 66-73
KIRIYAMA, T., BURGESS, S.C., MOORE, D.F. and SHIBAIKE, N. (1996) 'A study of a design process of a micro-accelerometer.' in RACE International Symposium, Tokyo, Japan, -
KIRIYAMA, T., NAKAJIMA, N., YOSHIMURA, S., BURGESS, S.C., MOORE, D.F. and SHIBAIKE, N. (1996) 'A conceptual design environment for micromechanisms' in European Design and Test Conference and Exhibition, Paris, 448-453
KITCHING, K.J., COLE, D.J. and CEBON, D. (1996) 'The development of a heavy vehicle semi-active damper' in International Symposium on Advanced Vehicle Control (AVEC'96), Aachen, Germany, 1, 153-162
LIN, R.C., CEBON, D. and COLE, D.J. (1996) 'Active roll-control of articulated vehicles' in Vehicle System Dynamics, 26 (1), 17-43
LIN, R.C., CEBON, D. and COLE, D.J. (1996) 'Optimal roll-control of a single unit lorry' in Proceedings - Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 210 (D1), 45-55
MURDOCH, T.N.S. and BALL, N.R. (1996) 'Machine learning in configuration design' in Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 10, 101-113
MURDOCH, T.N.S. and STEPHENSON, A. (1996) 'The development of a configuration case study tool', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR23 (not available)
MURDOCH, T.N.S. and WALLACE, K.M.M. (1996) 'Design for technical merit' in Design for X: Concurrent engineering imperatives, 463-484
NIDAMARTHI, S. (1996) 'The co-evolution of requirements and solutions', Cambridge University Engineering Department, First Year Report
NOWACK, M.L. and EDWARDS, K.L. (1996) 'Supporting manufacturability considerations in the early stages of composite product design' in 7th European Conference on Composite Materials, London, 2, 323-328
NOWACK, M.L. and EDWARDS, K.L. (1996) 'An approach for supporting manufacturability consideration in the early stages of design' in Design Engineering Conference 1996, Chicago, Illinois, USA, 1, 15-22
RODGERS, P.A. (1996) 'Experiencing the design process: design competitions in undergraduate product design education' in 3rd National Conference on Product Design Education (PDE 96), University of Central Lancashire, Preston,
RODGERS, P.A. and HUXOR, A. (1996) 'Knowledge-based design systems as texts: an emerging view' in International Conference on Computer-Aided Design (CADEX 96), Hagenberg, Austria, 162-170
RODGERS, P.A. and HUXOR, A. (1996) 'KBS design tools: an emerging paradigm' in 13th Irish Manufacturing Conference (IMC-13), University of Limerick, Ireland, 805 - 814
STEPHENSON, J. and WALLACE, K.M. (1996) 'Design for reliability for mechanisms' in Design for X: Concurrent Engineering Imperatives, 245-267
TANG, M.X. (1996) 'Inductive learning in the context of intelligent design', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR41
TANG, M.X. (1996) 'A 3D assembly algorithm for embodiment design', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR45
TANG, M.X. (1996) 'A knowledge-based functional modelling system for integrated design' in 7th International Machine Design and Production Conference, Ankara, Turkey,
TANG, M.X. (1996) 'An integrated application of inductive learning techniques in intelligent CAD systems' in 4th International Conference on Artificial Intelligence in Design (AID'96) Workshop on Machine Learning in Design, Stanford University, CA, USA,
TANG, M.X. (1996) 'An AI-based architecture for concurrency management in engineering design' in 1996 ASME International Design Engineering Technical Conferences (DETC'96), Chicago, Illinois, USA,
TANG, M.X. (1996) 'Integration of a design concept learning scheme within a knowledge-based design support system' in ASCE Congress on Computing for Civil Engineering, Anaheim, CA, USA,
TANG, M.X. (1996) 'Goldwork III, a knowledge-based system development tool.', Cambridge University Engineering Department, Technical Report CUED/C-ECD/TR36
TANG, M.X. (1996) 'Developing collaborative CAD systems using AI techniques', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR40
THORNTON, A.C. and JOHNSON, A.L. (1996) 'CADET: a software support tool for constraint processes in embodiment design' in Research in Engineering Design, 8 (1), 1-13
UPTON, N.K. (1996) 'Modelling in the UK aerospace industry', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR34
WALLACE, K.M.M. (1996) 'Engineering design - a systematic approach by Pahl, G. and Beitz, W. (2nd ed)', Springer Verlag
WARWICK, K. and BALL, N.R. (1996) 'Self-organising neural networks for adaptive control' in Journal of Intelligent and Robotic Systems, 15, 153-163
WATERMAN, N.A. and ASHBY, M.F. (1996) 'The materials selector, 3 vols (2nd ed)', Chapman and Hall, 0412615509
WEAVER, P.M. (1996) 'The optimal selection of material and section-shape' in Journal of Engineering Design, 7 (2), 129-150
WEAVER, P.M. and ASHBY, M.F. (1996) 'Material limits for shape efficiency', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR39
WEAVER, P.M. and BURGESS, S.C. (1996) 'The design of composite vaulting poles' in 3rd International Conference on Composites Engineering (ICCE 3), New Orleans, LA, USA, 913-914
WEAVER, P.M., ASHBY, M.F., BURGESS, S.C. and SHIBAIKE, N. (1996) 'A case study on refrigerator insulation' in Materials and Design, 17 (1), 11-17
WEAVER, P.M., ASHBY, M.F., BURGESS, S.C. and SHIBAIKE, N. (1996) 'Selection of materials to reduce environmental impact. Refrigerator insulation, a case study' in Journal of Materials and Design, 17, 11-17
WEGST, U.G.K. and ASHBY, M.F. (1996) 'Alternative woods for violin bows' in Newsletter of the British Violin Making Association, (5), 7-14
WEGST, U.G.K. and ASHBY, M.F. (1996) 'Materials selection for sports equipment' in 1st International Conference on the Engineering of Sport, Sheffield, UK, 1, 175-184
YAO, Z. (1996) 'Constraint management for engineering design', PhD-thesis, Cambridge University Engineering Department

1995

ACKERS, A., EDWARDS, K.L. and ROOZENBURG, N. (1995) 'Design guidelines support of decision making during the early stages of the design process' in 10th International Conference on Engineering Design (ICED'95), Prague, Czech Republic, 4, 1477-1482
ASHBY, M.F. (1995) 'Materials selection: multiple constraints and objectives', Cambridge University Engineering Department, Technical Report CUED/C-MATS/TR 229
ASHBY, M.F. (1995) 'Materials, bicycles and design (The 1994 Edward DeMille Campbell Memorial Lecture)' in Metallurgical and Materials Transactions A, 26A, 3057-3064
ASHBY, M.F. and ABEL, C.A. (1995) 'Materials selection to resist creep' in Philosophical Transactions - Royal Society London Series A Mathematical Physcial and Engineering Sciences, 351, 451-468
ASHBY, M.F. and CEBON, D. (1995) 'Materials selection for aerospace design' in Aerotech 95, IMech E, Birmingham, UK,
ASHBY, M.F., GIBSON, L.J., WEGST, U. and OLIVE, R. (1995) 'The mechanical properties of natural materials, I: material property charts' in Proceedings of the Royal Society: Mathematical, Physical and Engineering Sciences, 450 (1938), 123-140
BALL, N.R.R. and MURDOCH, T.N.S. (1995) 'Qualitative analysis of design configuration spaces' in 10th International Conference on Engineering Design (ICED'95), Prague, Czech Republic, 4, 1507-1512
BLESSING, L.T.M. (1995) 'Effizienter Entwickeln - welche Rolle hat die Konstruktionsforschung.' in Effizienter Entwickeln und Konstruieren - Wege zu besseren Losungen., 125-143
BLESSING, L.T.M. (1995) 'Using protocol analysis for evaluating a design support tool' in 10th International Conference on Engineering Design (ICED'95), Prague, Czech Republic, 2, 502-507
BLESSING, L.T.M., CHAKRABARTI, A. and WALLACE, K.M.M. (1995) 'A design research methodology' in 10th International Conference on Engineering Design (ICED'95), Prague, Czech Republic, 1, 50-55
BURGESS, S.C. (1995) 'The design of an advanced primary deployment mechanism for a spacecraft solar array' in Journal of Engineering Design, 6 (4), 291-307
BURGESS, S.C. (1995) 'Simulation of the initial deployment kinetics of a spacecraft solar array' in Proceedings - institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 209 (2), 131
BURGESS, S.C. and WALLACE, K.M. (1995) 'An overview of the functionality needed in CAD tools.' in 10th International conference on engineering design (ICED'95), Prague, Czech Republic, 4, 1296-1301
CHAKRABARTI, A. and WOLF, B. (1995) 'Reasoning with shapes: Some observations from a case study' in 1995 ASME Design Engineering Technical Conferences (DETC'95), Boston, USA, 83-DE, 315-322
CHAKRABARTI, A., MURDOCH, T.N.S. and WALLACE, K.M. (1995) 'Towards a glossary of engineering design terms' in 10th International Conference on Engineering Design (ICED'95), Prague, Czech Republic, 1, 185-186
CHARLTON, C.T. (1995) 'Analogical reasoning in case-based design', Cambridge University Engineering Department, First Year Report
CHEN, W.J., EDWARDS, K.L. and WALLACE, K.M. (1995) 'Manufacturing assistant for engineering designers' in 10th International Conference on Engineering Design (ICED'95), Prague, Czech Republic, 3, 915-920
COLE, D.J. and CEBON, D. (1995) 'Modification of heavy vehicle suspension to reduce road damage' in Proceedings - Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 209 (D3), 183-194
DANIEL, J.H. (1995) 'Fabrication of Lilliputian devices in silicon', Cambridge University Engineering Department, First Year Report
DWARAKANATH, S. and WALLACE, K.M. (1995) 'Design Decision Making Process: Observations from individual and group design experiments' in 10th International Conference on Engineering Design (ICED'95), Prague, Czech Republic, 2, 555-560
DWARAKANATH, S. and WALLACE, K.M.M. (1995) 'Decision making in design: Observations from design experiments' in Journal of Engineering Design, 6 (3), 191-206
DWARAKANATH, S., BLESSING, L.T.M. and WALLACE, K.M. (1995) 'Descriptive studies: Starting point for research in engineering design' in International Conference on Advances in Mechanical Engineering (ICAME), Indian Institute of Science, Bangalore, India, 341-361
ESAWI, A.M.K. and ASHBY, M.F. (1995) 'Cost estimation techniques for the early stages of design', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR31
ESAWI, A.M.K. and ASHBY, M.F. (1995) 'Selection of manufacturing processes', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR30
GIBSON, L.J., ASHBY, M.F., KARAM, G.N., WEGST, U. and SHERCLIFF, H.R. (1995) 'The mechanical properties of natural materials, II. Microstructures for mechanical efficiency' in Proceedings - Royal Society of London A, A450, 141-162
GREEN, M.F., CEBON, D. and COLE, D.J. (1995) 'Effects of heavy vehicle suspension design on dynamics of highway bridges' in Journal of Structural Engineering, 121 (2), 272-282
HAMILTON, J.R. (1995) 'Development studies of a knowledge-based system for rotor design.', Cambridge University Engineering Department, First Year Report
HARDY, M.S.A. and CEBON, D. (1995) 'An investigation of anti-lock braking strategies for heavy goods vehicles' in Proceedings - Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 209 (D4), 263-271
HARMER, Q.J. and WALLACE, K.M. (1995) 'Systematic design methods for low volume production' in 10th International Conference on Engineering Design (ICED'95), Prague, Czech Republic, 3, 1126-1127
HARMER, Q.J. and WALLACE, K.M.M. (1995) 'Design-led component selection', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR29
HARMER, Q.J. and WALLACE, K.M.M. (1995) 'Cost estimation at the conceptual stage for low-volume products', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR26
HUBER, R., GRABOWSKI, H., KIRIYAMA, T., YONEDA, S., JOHNSON, A.L. and BURGESS, S.C. (1995) 'A design environment for the design of micromachines' in 1995 ASME Design Engineering Technical Conferences (DETC'95), Boston, USA, 649-661
KHANG, J.H.L. (1995) 'A systems approach to engineering design', Cambridge University Engineering Department, First Year Report
KLAUBERT, H.L.L. (1995) 'Tiny design: research into a design process for microelectromechanical systems', Cambridge University Engineering Department, First Year Report
MARSH, J.R. and WALLACE, K.M. (1995) 'Integrity of design information' in 10th International Conference on Engineering Design (ICED'95), Prague, Czech Republic, 4, 1449-1454
MOORE, D.F., BURGESS, S.C., CHIANG, H-S., KLAUBERT, H.L., SHIBAIKE, N. and KIRIYAMA, T. (1995) 'Micromachining and focused ion beam etching of Si for accelerometers' in SPIE's Symposium on micromachining and microfabrication, Austin, Texas USA, 2639, 253-258
MOORE, D.F., BURGESS, S.C., CHIANG, H-S., KLAUBERT, H.L., SHIBAIKE, N. and KIRIYAMA, T. (1995) 'Microelectromechanical accelerometer', 1995
MURDOCH, T.N.S. (1995) 'Sharing design data', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR28
MURDOCH, T.N.S. (1995) 'A layered framework for structuring product data' in WDK Workshop on Product Structuring, Delft, The Netherlands,
MURDOCH, T.N.S. and BALL, N.R.R. (1995) 'A layered framework for sharing design data' in 10th International Conference on Engineering Design (ICED'95), Prague, Czech Republic, 4, 1471-1476
MURDOCH, T.N.S. and WALLACE, K.M.M. (1995) 'A case study in configuration evaluation' in 10th International Conference on Engineering Design (ICED'95), Prague, Czech Republic, 2, 590-595
NOONAN, C.A., ROBERTS, K., UPTON, N.K. and WATKINS, F.M. (1995) 'Integration issues in modular mission management development' in AGARD, Guidance and Control for Future Air-Defence Systems, Copenhagen, Denmark,
NOWACK, M.L. (1995) 'Support for manufacturability considerations in the early stages of design.', Cambridge University Engineering Department, First Year Report
POTTER, C.D.O. (1995) 'The storage, preservation and function of human hearts', PhD-thesis, Cambridge University Engineering Department
SARGENT, P.M., IGE, D.O. and BALL, N.R.R. (1995) 'Design of laminate composite layups using genetic algorithms' in Engineering with Computers, 11, 59-69
SHIBAIKE, N. (1995) 'Design of micro-mechanisms focusing on configuration, materials and processes' in Materials and Design, 16 (2), 83-90
STEPHENSON, J. (1995) 'Design for reliability in mechanical systems', PhD-thesis, Cambridge University Engineering Department
STEPHENSON, J. and WALLACE, K.M. (1995) 'Design for reliability in mechanical systems.' in 10th International Conference on Engineering Design (ICED'95), Prague, Czech Republic, 3, 964-969
TANG, M.X. (1995) 'Development of an Integrated AI System for Conceptual Design Support' in 1995 Lancaster International Workshop on Engineering Design, Lancaster, 153-169
TANG, M.X. (1995) 'Exploring design solutions using a context management system' in International Joint Conference on Artificial Intelligence (IJCAI 95), Montreal, Canada, 157-166
TANG, M.X. (1995) 'An inductive learning system for intelligent design support' in 5th Scandinavian Conference on Artificial Intelligence in Design, Trondheim, Norway, 71-83
UPTON, N.K. (1995) 'Design Tools & Business Success' in 10th International Conference on Engineering Design (ICED'95), Prague, Czech Republic, 1, 215-216
UPTON, N.K. (1995) 'Computer-based tools and business success in the Aerospace Industry - framework of investigation', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR25
UPTON, N.K. (1995) 'Sensor Management Systems' in Aerotech 95, Birmingham,
WALLACE, K.M., BALL, N.R. and TANG, M.X. (1995) 'Object-oriented technology in engineering design' in Engineering Computing Newsletter, (Issue 56)
WALLACE, K.M., BALL, N.R. and TANG, M.X. (1995) 'AI in mechanical engineering design' in 4th Workshop on Research Directions for Artificial Intelligence in Design, Enschede, The Netherlands,
WALLACE, K.M., BALL, N.R. and TANG, M.X. (1995) 'Object-oriented technology in engineering design' in EPSRC Workshop on Object-Oriented Technology, University of Strathclyde, Glasgow, 10-19
WALLACE, K.M.M. and BURGESS, S.C. (1995) 'Methods and tools for decision making in engineering design' in Design Studies, 16 (4), 429-446
WEAVER, P.M. and ASHBY, M.F. (1995) 'The optimal selection of material and shape', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR27
YAO, Z. and JOHNSON, A.L. (1995) 'Formalising knowledge for constraint satisfaction in the design process' in 10th International Conference on Engineering Design (ICED'95), Prague, Czech Republic,
YAO, Z., MURDOCH, T.N.S. and JOHNSON, A.L. (1995) 'Experience as constraint in embodiment design' in 1995 ASME Design Engineering Technical Conferences (DETC'95), Boston, USA, 1, 111-118

1994

ABEL, C.A. and ASHBY, M.F. (1994) 'Materials selection to resist creep and creep rupture', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR18
ABEL, C.A., EDWARDS, K.L. and ASHBY, M.F. (1994) 'Materials, processing and the environment in engineering design: the issues' in Materials and Design, 15 (4), 179-193
ASHBY, M.F. (1994) 'Materials selection in mechanical design' in La metallurgia italiana, 86 (10)
BALL, N.R. (1994) 'Application of a neural network based classifier system to AGV obstacle avoidance' in IMACs International Symposium on Signal processing, Robotics and Neural Networks (SPRANN-94), Lille, 294-297
BALL, N.R.R. (1994) 'Reinforcement learning in Kohonen feature maps' in International Conference on Artificial Neural Networks ICANN-94, Sorrento, I, 663-666
BALL, N.R.R. (1994) 'Organizing an Animat's behavioural repertoires using Kohonen feature maps' in 3rd International Conference on Simulation of Adaptive Behaviour, Brighton,
BALL, N.R.R. and MURDOCH, T.N.S. (1994) 'Analysing design configuration spaces using a self organising neural network' in Adaptive Computing in Engineering Design and Control, Plymouth, 90 - 96
BLESSING, L.T.M. (1994) 'From design characteristics to system requirements', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR16
CEBON, D. and ASHBY, M.F. (1994) 'Materials selection for precision instruments' in Measurement Science and Technology, 5 (3), 296-306
CEBON, D. and ASHBY, M.F. (1994) 'Cambridge materials selector user's manual, version 2.0', Granta Design Ltd.
CEBON, D. and COLE, D.J. (1994) 'Truck suspension design to minimise road damage', Cambridge University Engineering Department, Technical Report CUED/C-MECH/TR64
CHAKRABARTI, A. (1994) 'A Framework for a Glossary of Terms in Engineering Design', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR19
CHAKRABARTI, A. (1994) 'Requirements identification: a central issue in design research' in East-West Conference on Information Technology in Design, Moscow, 108-117
CHAKRABARTI, A. and ABEL, C.A. (1994) 'The mobile arm support project as a test-bed for design research at the Cambridge EDC', Cambridge University Engineering Department CUED/C-EDC/TR17
CHAKRABARTI, A. and ABEL, C.A. (1994) 'The mobile arm support project as a test-bed for design research at the Cambridge EDC' in 16th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, Baltimore, Maryland, USA, 1, 486-487
CHAKRABARTI, A. and BLIGH, T.P. (1994) 'An approach to functional synthesis of solutions in mechanical conceptual design. Part I: Introduction and knowledge representation.' in Research in Engineering Design, 6 (3), 127-141
CHAKRABARTI, A. and BLIGH, T.P. (1994) 'A two-step approach to conceptual design of mechanical devices' in 3rd International Conference on Artificial Intelligence in Design (AID'94), Lausanne, Switzerland, 21-38
CHAKRABARTI, A., MURDOCH, T.N.S. and EDWARDS, K.L. (1994) 'An implementation of the glossary framework', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR24
CLARKSON, P.J., RHODES, I. and COLVIN, R.A. (1994) 'Process development and validation: a positive approach to validation' in Medical Device Technology, 6 (1), 26-30
COLLOP, AC. (1994) 'Effects of traffic and temperature on flexible pavement wear', PhD-thesis, Cambridge University Engineering Department
DWARAKANATH, S. and WALLACE, K.M. (1994) 'Decision making in design: observations from design experiments' in WDK-Workshop on Evaluation and Decision in Design (EVAD), Technical University, Lyngby, Denmark,
EDWARDS, K.L. (1994) 'Editorial' in Materials and Design, 15 (1), 2
EDWARDS, K.L. (1994) 'Engineering design for wealth creation at Cambridge University, Conference Report' in Materials and Design, 15 (6), 375-376
EDWARDS, K.L. (1994) 'Optimal selection of composite materials in mechanical engineering design' in 4th International Conference on CAD in Composite Materials (CADCOMP'94), Southampton, 85-92
EDWARDS, K.L. (1994) 'Designing with composite materials - an expert system approach' in 2nd Biennial European Joint Conference on Engineering Systems Design & Analysis (ESDA'94), London, 64-2, 237-242
EDWARDS, K.L. (1994) 'Towards improved decision support in materials and design engineering' in Materials and Design, 15 (5), 251-258
ESAWI, A.M.K. (1994) 'Systematic process selection in mechanical design', PhD-thesis, Cambridge University Engineering Department
FANDRICH, M. and HOGUE, C. (1994) 'Experimental study of rigid body impacts' in 2nd Contact Mechanics International Symposium, Carry-Le-Rouet, 389-396
FLECK, N.A., KHANG, K.J. and ASHBY, M.F. (1994) 'The cyclic properties of engineering materials' in Acta Metallurgica et Materialia, 42 (2), 365-381
FU, T-T. (1994) 'Investigation of heavy vehicle suspension design', Cambridge University Engineering Department, First Year Report
GALAGEDERA, S.B., ALLEN, D., BAIRD, S.A., CHURCH, I., HARDY, P., HAWTHORNE, P.A., JAROSLAWSKI, S., JARRETT, J.P., MADANI BOZORG, M.S., MATSON, R., QUINTON, S.P.H., CASSIDY, A., CUSSANS, D., HEATH, H.F., FOSTER, B., MORGADO, C.J.S. and TAPPER, R.J. (1994) 'The timing and control system of the Zeus tracking detector data acquisition electronics' in IEEE Transactions on Nuclear Science, 41, Part 1 (4), 1255-1259
HARMER, Q.J. (1994) 'Systematic design of rehabilitation products', Cambridge University Engineering Department, First Year Report
HARMER, Q.J. (1994) 'Quality engineering in rehabilitation products', University Engineering Department
JACKSON, R.D. and CHAKRABARTI, A. (1994) 'Proceedings, 3rd Cambridge Workshop on Rehabilitation Robotics: Design methods in rehabilitation engineering', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR17
JOHNSON, A.L. and YAO, Z. (1994) 'A development path for CAD' in 4th International Conference on Computer-Aided Drafting, Design and Manufacturing Technology (CADDM'94),, Beijing, China, 11-16
KING, T. (1994) 'Systematic medical engineering design', PhD-thesis, Cambridge University Engineering Department
KITCHING, K.J. (1994) 'The use of semi-active dampers to optimise ride and dynamic loads', Cambridge University Engineering Department, First Year Report
MARSH, J.R. (1994) 'The capture and structure of design experience', Cambridge University Engineering Department, First Year Report
MURDOCH, T.N.S. and BALL, N.R. (1994) 'The development of an EDC product data model', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR21
MURDOCH, T.N.S. and WEIMER, K. (1994) 'An engineering design literature database', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR20
SARGENT, P.M. (1994) 'Design science or nonscience' in Design Studies, 15 (4), 389-402
SARGENT, P.M. (1994) 'A non-scientific theory of design' in Design Studies, 15 (4), 389-402
SHERCLIFF, H.R. and ASHBY, M.F. (1994) 'Design with metal matrix composites' in Materials Science and Technology, 10, 443-451
WALLACE, K.M. (1994) 'Developments in engineering design education at Cambridge University', Engineering Clinic Issues, Harvey Mudd College 30th Anniversary Symposium, Claremont, USA
WALLACE, K.M., JOHNSON, A.L., MATHESON, J.M.R., BLESSING, L.T.M. and JACKSON, R.D. (1994) 'How to design a product in the year 2000' in Design Engineering, , 47-50
WALLACE, K.M.M. (1994) 'Fundamentals of the design process and assessment of user requirements', Cambridge University Engineering Department
WALLACE, K.M.M. and DWARAKANATH, S. (1994) 'Understanding decision making in engineering design' in Conference on Information Technology to Support Engineering Decision Making, ICE London, 40 - 50
YAO, Z. and JOHNSON, A.L. (1994) 'Towards fewer design failures' in 1994 ASME Design Engineering Technical Conferences (DETC'94), Minneapolis, USA, 1, 335-341
YAO, Z. and JOHNSON, A.L. (1994) 'Supporting design validation by semantic analysis' in 7th International Conference of Industrial and Engineering Applications of Artificial Intelligence and Expert Systems (IEA/AIE94), Austin, Texas, USA, 501-505
YAO, Z. and JOHNSON, A.L. (1994) 'Utilising shallow knowledge to prevent design failures' in 4th International Conference on Computer-Aided Drafting, Design and Manufacturing Technology (CADDM'94), Beijing, China, 380-384

1993

ANGUS, J. and MURDOCH, T.N.S. (1993) 'Supporting product definition decisions' in International Conference on Engineering Design (ICED'93), The Hague, The Netherlands, 3, 1725-1732
ASHBY, M.F. (1993) 'Selecting the components of composites' in Journal de Physique IV, supplement to Journal de Physique III, 3, 1595-1599
ASHBY, M.F. (1993) 'Criteria for selecting the components of composites' in Acta Metallurgica et Mathematical, 41 (5), l313-1335
ASHBY, M.F., ABEL, C.A. and EDWARDS, K.L. (1993) 'Materials and process selection' in International Conference on Engineering Design (ICED'93), The Hague, The Netherlands,
ASHBY, M.F. and CEBON, D. (1993) 'Materials selection in mechanical design' in Journal de Physique IV, supplement to Journal de Physique III, 3, 1-9
BALL, N.R. and WARWICK, K. (1993) 'Using self-organising feature maps for the control of artificial organisms' in Control Theory and Applications, IEE Proceedings D [see also IEE Proceedings-Control Theory and Applications], London, UK, 140, 176-180
BALL, N.R.R. (1993) 'Towards the development of cognitive maps in classifier systems' in International Conference on Artificial Neural Networks and Genetic Algorithms, Innsbruck, 712-718
BALL, N.R.R., SARGENT, P.M. and IGE, D.O. (1993) 'Genetic algorithm representations for laminate layups' in Artificial Intelligence in Engineering, 8, 99-108
BAUERT, F. (1993) 'The mobile arm support phase I: design, manufacture, testing, software tools', Cambridge University Engineering Departrnent, Technical Report CUED/C-EDC/TR13
BAUERT, F. (1993) 'Konstruktionslehre 2000 - mechatronik oder marketing?' in 17th Colloquium on Engineering Design, TU "Otto von Guericke", Magdeburg,
BAUERT, F. (1993) 'Creative and systematic team-work using abstract concepts and concrete entities' in International Conference on Engineering Design (ICED'93), The Hague, The Netherlands, 1, 355-358
BAUERT, F., ABEL, C.A., EDWARDS, K.L., CHONG, W.T. and EVRON, I. (1993) 'The management assistant: tools to support managerial activities of engineering design projects', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR15
BAUERT, F. and BALL, N.R.R. (1993) 'The IDF: Blackboards as a communication medium between designers and software modules' in International Conference on Engineering Design (ICED'93), The Hague, The Netherlands, 3, 1351-1358
BAUERT, F. and EDWARDS, K.L. (1993) 'Teamwork in product development' in International Conference on Engineering Design (ICED'93), The Hague, The Netherlands,
BLESSING, L.T.M. (1993) 'A process-based approach to computer supported engineering design' in International Conference on Engineering Design (ICED'93), The Hague, The Netherlands, 3, 1393-1400
CEBON, D., ASHBY, M.F. and CHONG, W-T. (1993) 'Selecting materials in design' in International Conference on Engineering Design (ICED'93), The Hague, The Netherlands, 2, 955-958
CHAKRABARTI, A. (1993) 'Towards a theory for functional reasoning in design' in International Conference on Engineering Design (ICED'93), The Hague, The Netherlands, 1, 1-8
CHEN, W.J. and WALLACE, K.M. (1993) 'Manufacturing information for designers' in International Conference on Engineering Design (ICED'93), The Hague, The Netherlands, 2, 1111-1114
DWARAKANATH, S. and WALLACE, K.M.M. (1993) 'Decision support methods for engineering design' in International Conference on Engineering Design (ICED'93), The Hague, The Netherlands, 1, 489-492
EDWARDS, K.L. (1993) 'Improved design through guidelines support' in Engineering Designer, 19 (5), 22-23
EDWARDS, K.L. and BOOKER, P.J. (1993) 'Engineering design research: progress at Cambridge Engineering Design Centre' in Engineering Designer, 19 (5), 20-21
EDWARDS, K.L. and MURDOCH, T.N.S. (1993) 'Modelling engineering design principles' in International Conference on Engineering Design (ICED'93), The Hague, The Netherlands, 3, 1676-1683
EDWARDS, K.L., WALLACE, K.M. and AGUIRRE-ESPONDA, G.J. (1993) 'Designers' electronic guidebook - an engineering design guidelines database', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR14
GALAGEDERA, S.B., ALLEN, D., BAIRD, S.A., CHURCH, I., HARDY, P., JAROSLAWSKI, S., JARRETT, J., MATSON, R., QUINTON, S.P.H., CASSIDY, A., CUSSANS, D., FAWCETT, H.F., FOSTER, B., MORGADO, C.J.S. and TAPPER, R.J. (1993) 'The timing and control system of the Zeus tracking detector data acquisition electronics' in Nuclear Science Symposium and Medical Imaging Conference, San Fransisco, 514 - 517
GARTON, D.A., KHANG, K.J., FLECK, N.A. and ASHBY, M.F. (1993) 'Materials selection for minimum weight fatigue design' in Theoretical concepts and numerical analysis of fatigue
HOGUE, C. and NEWLAND, D.E. (1993) 'Efficient computer modelling of the motion of arbitrary grains' in Powders and Grains 93, Birmingham, 413-419
JOHNSON, A.L., THORNTON, A.C. and FONG, C.F. (1993) 'Modelling functionality in CAD: implications for product representation' in International Conference on Engineering Design (ICED'93), The Hague, The Netherlands, 3, 1610-1617
KAUTE, D.A.W. (1993) 'Failure mechanisms in ceramic matrix composites', PhD-thesis, Cambridge University Engineering Department
KING, T. and CEBON, D. (1993) 'An alternative to screws for plating osteoporotic bone' in Journal of Bone and Joint Surgery, 15, 79-82
MAHONEY, R.M. (1993) 'Human target-directed position control', PhD-thesis, Cambridge University Engineering Department
MURDOCH, T.N.S. (1993) 'Configuration evaluation and optimisation of technical systems', PhD-thesis, Cambridge University Engineering Department
SARGENT, P.M. (1993) 'Satisfactory design theory?' in SERC Design Research Newsletter,
SARGENT, P.M. (1993) 'Inherently flexible cell communications: a review' in Journal of Computer Integrated Manufacturing Systems, 6 (4), 244-259
STEPHENSON, J.A. (1993) 'Evaluation of mechanical systems at the design stage', Cambridge University Engineering Department, First Year Report
THORNTON, A.C. (1993) 'Constraint specification and satisfaction in embodiment design', PhD-thesis, Cambridge University Engineering Department
THORNTON, A.C. and JOHNSON, A.L. (1993) 'Constraint specification and satisfaction in embodiment design' in International Conference on Engineering Design (ICED'93), The Hague, The Netherlands, 3, 1319-1326
WALLACE, K.M.M. (1993) 'Teaching engineering design in the new four-year course at Cambridge University' in The International Journal of Mechanical Engineering Education, 21, 233-246
WALLACE, K.M.M. (1993) 'Engineering design teaching in the new 4-year course at Cambridge University' in International Conference on Engineering Design (ICED'93), The Hague, The Netherlands, 3, 1867-1870
WARWICK, K. and BALL, N.R.R. (1993) 'Using self-organizing feature maps for adaptive control' in IEE symposium on New Directions in Control Theory and Applications, Crete,
YAO, Z. (1993) 'Towards fewer design failures: the semantic analysis of functional descriptions', Cambridge University Engineering Department, First Year Report

1992

AGUIRRE-ESPONDA, G.J. (1992) 'Evaluation of technical systems at the design stage', PhD-thesis, Cambridge University Engineering Department
ASHBY, M.F. (1992) 'Materials and the environment' in Physica Status Solidi (a), 131, 625-638
ASHBY, M.F. (1992) 'Materials and the environment', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR10
ASHBY, M.F. (1992) 'Materials selection in mechanical design', Butterworth-Heineman, 0750627271
BALL, N.R.R. (1992) 'Competitive learning in classifier feature maps' in International Conference on Artificial Neural Networks ICANN-92, Brighton, I, 703-706
BALL, N.R.R. and BAUERT, F. (1992) 'The integrated design framework: supporting the design process using a blackboard system' in International Conference on Artificial Intelligence in Design (AID'92), Pittsburgh, USA, 327-348
BALL, N.R.R. and WARWICK, K. (1992) 'An adaptive control system based on self-organizing feature maps and genetic algorithms' in Neural Network World - International Journal on Neural and Mass-parallel Computing and Information Systems, (1/92), 5-26
BALL, N.R.R. and WARWICK, K. (1992) 'Applying self organizing feature maps to the control of artificial organisms in maze running tasks' in ACC-1992, San Diego,
BAUERT, F., CHEN, W.J. and GREEN, D. (1992) 'Knowledge based assistance to support design for manufacture.' in Workshop notes on Concurrent Engineering: Requirements for Knowledge-Based Design Support, 10th European Conference on Artificial Intelligence, Vienna, Austria,
BLESSING, L.T.M. (1992) 'Engineering design and artificial intelligence: a promising marriage?' in Research in design thinking, 177-212
CEBON, D. and ASHBY, M.F. (1992) 'Material selection for mechanical design' in ASTM Conference on Computerisation and Networks of Materials Databases (ASTM 1992), Cambridge, 3, (Best Paper Award)
CEBON, D. and ASHBY, M.F. (1992) 'Computer-aided materials selection for mechanical design' in Metals and Materials, , 25-30
CEBON, D. and MITCHELL, C.G.B. (1992) 'Heavy vehicles and roads: technology, safety and policy', Thomas Telford
CHAKRABARTI, A. and BLIGH, T.P. (1992) 'A knowledge-based system for the synthesis of single input single output systems in mechanical conceptual design' in 4th Joint Europe-USA Conference on AI and Expert Systems Applications (EXPERSYS-92), Houston, USA, 384-389
CHAKRABARTI, A., BLIGH, T.P. and HOLDEN, A. (1992) 'Towards a decision-support framework for the embodiment phase of mechanical design' in Artificial Intelligence for Engineering Design, Analysis and Manufacture, 7 (1), 21-36
CHEN, W.J. (1992) 'Towards a manufacturing assistant', Cambridge University Engineering Department, First Year Report
DWARAKANATH, S. (1992) 'Decision support for engineering design', Cambridge University Engineering Department, First Year Report
IGE, D.O. and SARGENT, P.M. (1992) 'An apparatus for determining the interlaminar tensile strength of laminated composites' in European Conference on Composite Materials (ECCM), Amsterdam,
JOHNSON, A.L. (1992) 'Mechanism analysis by matrix reduction. Part 1: Statics' in Proceedings - Royal Society of London A, 439, 485-495
JOHNSON, A.L. (1992) 'Supporting creativity with computers' in 14th Annual Design Seminar - Creativity in Engineering Design (SEED 92), University of Cambridge, UK, 31-35
JOHNSON, A.L. (1992) 'Mechanism analysis by matrix reduction. Part II: Kinematics' in Proceedings - Royal Society of London A, 439, 497-510
KONDA, S., MONARCH, I., SARGENT, P. and SUBRAHMANIAN, E. (1992) 'Shared memory in design: a unifying theme for research and practice' in Research in Engineering Design, 4 (1), 23-42
MURDOCH, T.N.S. and EDWARDS, K.L. (1992) 'Costing: a key to better design' in Engineering Design & Cost Estimating Seminar, University of Newcastle,
MURDOCH, T.N.S. and WALLACE, K.M.M. (1992) 'An approach to configuration optimisation' in Journal of Engineering Design, 3, 99-116
NEWLAND, D.E. (1992) 'Heavy vehicle weights and dimensions: technical issues - the way forward' in 3rd International Symposium on Heavy Vehicle Weights and Dimensions, Cambridge, 442-447
NEWLAND, D.E. (1992) 'Isolating buildings from vibration' in 2nd International Congress on Recent Developments in Air- and Structure-Borne Sound and Vibration, Auburn University, USA, 779-786
NEWLAND, D.E. (1992) 'Learning from disasters - the engineer's new code' in Professional Engineering, 5 (9), 12-13
SARGENT, P.M. (1992) 'Data quality in materials information systems' in Computer-Aided Design, 24 (9), 477-490
SARGENT, P.M., SUBRAHMANIAN, E., DOWNS, M., GREENE, R. and RISHEL, D. (1992) 'Materials information and conceptual data modeling' in Computerization and networking of materials databases, Philadelphia, 3,
ULLMAN, D.G., BLESSING, L.T.M. and WALLACE, K.M. (1992) 'Understanding function and function-to-form evolution', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR12
WALLACE, K.M.M. (1992) 'Some observations on design thinking' in Research in design thinking, 75-86
WALLACE, K.M.M. and BAUERT, F. (1992) 'Konstruktionstechnik-Zentren - eine Forschungsinitiative fur eine bessere Produktentwicklung in Grossbritannien. (Engineering Design Centres: A Research Initiative towards Improved Product Development in the UK).' in Praxiserprobte Methoden erfolgreicher Produktentwicklung, 43-60
WALLACE, K.M.M. and BAUERT, F. (1992) 'Engineering design in the UK: The SERC research initiative and the EDC Cambridge', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR11
WATERMAN, N.A. and ASHBY, M.F. (1992) 'Elsevier materials selector, 3 vols', Elsevier Applied Science, 1851666060, 1851666079, 1851666087, 1851666052, 0849377900

1991

ASHBY, M.F. (1991) 'On materials and shape', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR1
ASHBY, M.F. (1991) 'Materials and shape' in Acta Metallurgica et Materialia, 39 (6), 1025-1039
BALL, N.R. and WARWICK, K. (1991) 'A novel feature map architecture for the representation of classifier condition sets' in International Conference on Artificial Neural Networks (ICANN-91), Helsinki, II,
BALL, N.R.R. (1991) 'Applying genetic algorithms to the design of laminate layups', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR6
BALL, N.R.R., BAUERT, F. and BLESSING, L.T.M. (1991) 'Towards the development of an integrated design framework using the Blackboard model', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR7
BAUERT, F. (1991) 'Product modelling - The key for industrial integration of function, geometry, technology and knowledge processing' in Eurotech Direct 91, Birmingham, UK,
BAUERT, F. (1991) 'Integration von Konstruktionsmethodik, Problemlsungsvefahren und Konstruktionswissen in produktmodellierende Systeme' in International Conference on Engineering Design (ICED'91), Zrich, Switzerland, 2, 1198-1205
BLESSING, L.T.M. (1991) 'The design process of a complex product: selected results of an analysis' in International Conference on Engineering Design (ICED'91), Zrich, Switzerland, 1, 342-350
CEBON, D. and ASHBY, M.F. (1991) 'Computer-based materials selection for mechanical design', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR3
CHAKRABARTI, A. (1991) 'Functional synthesis of single input single output systems in mechanical conceptual design', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR8I
CHAKRABARTI, A. (1991) 'Designing by functions', PhD-thesis, Cambridge University Engineering Department
CHAKRABARTI, A. and BAUERT, F. (1991) 'A framework for identification, validation and use of knowledge for problem solving in conceptual design', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR9
CHAKRABARTI, A. and BLIGH, T.P. (1991) 'Towards a decision-support framework for mechanical conceptual design' in International Conference on Engineering Design (ICED'91), Zrich, Switzerland, 1, 384-389
CLARKSON, P.J. and ACARNLEY, P.P. (1991) 'Development and performance of a practical multi stepping motor system' in Mechatronics, 1 (3), 253-276
CLARKSON, P.J. and ACARNLEY, P.P. (1991) 'Development and performance of a practical multi stepping motor system' in Mechatronics, 1 (3), 253-276
EDWARDS, K.L. (1991) 'Sandwich structures' in Technical File No 197, Engineering, 231 (23)
GOSINE, R.G., MAHONEY, R.M., GATISS, J., JACKSON, R.D., DARGIE, G., GIBSON, J., SCOTT, D. and JONES, T. (1991) 'Interactive robotics to aid physically disabled people in manufacturing tasks' in Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 205, 241-245
HALES, C. and WALLACE, K.M.M. (1991) 'Systematic design in practice' in International Conference on Engineering Design (ICED'91), Zrich, Switzerland, 1, 105-112
HOGUE, C. and NEWLAND, D.E. (1991) 'Computer simulation of ballistic separation' in International Conference on Bulk Materials Handling, London, 217-224
IGE, D.O. (1991) 'Mechanical design with composite materials', PhD-thesis, Cambridge University Engineering Department
JOHNSON, A.L. (1991) 'Designing by functions' in Design Studies, 12 (No 1), 51-57
JOHNSON, A.L. and THORNTON, A.C. (1991) 'Towards real CAD' in Design Studies, 12 (No 4), 232-236
MAHONEY, R. and JACKSON, R.D. (1991) 'Industrial considerations, human assessment, and design issues for applications in manufacturing' in International Conference on Rehabilitation Robotics (ICORR'91), Atlanta, Georgia, USA,
MAHONEY, R. and JACKSON, R.D. (1991) 'Interactive robotics in manufacturing' in World Congress on Technology, Washington DC, USA,
MURDOCH, T.N.S. (1991) 'The evaluation of technical systems', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR5
MURDOCH, T.N.S. and WALLACE, K.M.M. (1991) 'Configuration analysis of technical systems' in International Conference on Engineering Design (ICED'91), Zrich, Switzerland, 1, 35-41
POTTER, C.D.O. (1991) 'The storage, preservation and function of human hearts', Cambridge University Engineering Department, First Year Report
SARGENT, P.M. (1991) 'Decision techniques for materials selection systems', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR4
SARGENT, P.M. (1991) 'Materials information for CAD/CAM', Butterworth-Heinemann, 0750602775
SARGENT, P.M. (1991) 'Technical data interchange using tabular formats' in Journal of Chemical Information and Computer Sciences, 31, 297-300
SARGENT, P.M. (1991) 'Data quality in materials information systems', Cambridge University Engineering Department, Technical Report CUED/C-EDC/TR2
THORNTON, A.C. and JOHNSON, A.L. (1991) 'Towards Real CAD' in International Conference on Engineering Design (ICED'91), Zrich, Switzerland, 2, 896-903

1990

AGUIRRE-ESPONDA, G.J. and WALLACE, K.M. (1990) 'Engineering design guidelines database', Cambridge University Engineering Department, Report
AGUIRRE-ESPONDA, G.J. and WALLACE, K.M. (1990) 'Evaluation of technical systems at the design stage' in International Conference on Engineering Design (ICED'90), Dubrovnik,
AGUIRRE-ESPONDA, G.J. and WALLACE, K.M. (1990) 'Evaluacion de sistemas tecnologicos en la etapa de diseno' in XVI Congreso de la Academia de Ingenieria, AC, Mexico,
GOSINE, R.G., HARWIN, W.S. and JACKSON, R.D. (1990) 'An interactive robot workstation for applications in rehabilitation' in IEEE International Workshop on Intelligent Robots and Systems, Ibaraki, Japan,
MURDOCH, T.N.S. (1990) 'Design analysis of the high pressure turbine cooling air system in Rolls-Royce RB211 gas turbines', Cambridge University Engineering Department, First Year Report
SARGENT, P.M. (1990) 'Materials data interchange for component manufacture' in Engineering with Computers, 6, 237-247
SARGENT, P.M. (1990) 'Give us the tools and we'll give you doorknobs' in The Times Higher Education Supplement,
WALLACE, K.M. (1990) 'Toward improving product design' in Manufacturing Technology International, Europe,
WALLACE, K.M. (1990) 'A systematic approach to engineering design' in Design management - a handbook of issues and methods, 206-218

1989

ASHBY, M.F. (1989) 'Materials selection in conceptual design' in Materials Science and Technology, 5, 517-526
ASHBY, M.F. (1989) 'On the engineering properties of materials' in Acta Metallurgica et Materialia, 37 (5), 1273-1293
CLARKSON, P.J. and ACARNLEY, P.P. (1989) 'Simplified approach to the dynamic modelling of variable-reluctance stepping motors' in IEE Proceedings, Part B: Electric Power Applications, 136 (1), 1-10
WALLACE, K.M. (1989) 'Engineering design research - a pragmatic approach' in IEE Colloquium on Research in Engineering Design, London, 1989/31, 6/1-6/4
WALLACE, K.M. (1989) 'Better by design' in Manufacturing Engineer, 68 (5)
WALLACE, K.M. and HALES, C. (1989) 'Engineering design research areas' in International Conference on Engineering Design (ICED'89), Harrogate, UK,
WALLACE, K.M., BASSIL, R., CARTER, C.M. and SAUNDERS, P.J.W. (1989) 'Graduate design training in industry' in International Conference on Engineering Design (ICED'89), Harrogate, UK,

1988

ASHBY, M.F. (1988) 'Materials selection at the conceptual design stage' in Design Engineering,
CLARKSON, P.J. and ACARNLEY, P.P. (1988) 'Stability limits for the dynamic operation of variable-reluctance stepping motor systems' in IEE Proceedings, Part B: Electric Power Applications, 135 (6), 308-317
CLARKSON, P.J. and ACARNLEY, P.P. (1988) 'Stability Limits for dynamic operation of variable reluctance stepping motor systems' in IEE Proceedings, Part B: Electric Power Applications, 135 (6), 308-317
CLARKSON, P.J. and ACARNLEY, P.P. (1988) 'Closed-loop control of stepping motor systems' in IEEE Transactions on Industry Applications, 24 (4), 685-691
HALES, C. and WALLACE, K.M. (1988) 'Detailed analysis of an engineering design project' in International Journal of Applied Engineering Education, 4 (3), 289-294
WALLACE, K.M. (1988) 'Developments in Design Teaching in the Engineering Department at Cambridge University' in International Journal of Applied Engineering Education, 4 (3), 207-210
WALLACE, K.M. (1988) 'Teaching creativity in engineering design', 25
WALLACE, K.M. (1988) 'Studies in the application of design methods' in Conference on quality assurance in the process industries - Design 88, University of Aston, UK,
WALLACE, K.M. (1988) 'Case histories of design and their use' in Conference on quality assurance in the process industries - Design 88, University of Aston, UK,

1987

CLARKSON, P.J. and ACARNLEY, P.P. (1987) 'Instabilities in dual stepping motor systems' in IERE Journal, 57 (5), 200-206
WALLACE, K.M. (1987) 'Developments in design teaching in the Engineering Department at Cambridge University' in International Conference on Engineering Design (ICED'87), Boston, Massachusetts, USA,
WALLACE, K.M. (1987) 'Studying the engineering design process in practice' in Plenary and Interdisciplinary Lectures, International Congress on Planning and Design Theory, Boston,
WALLACE, K.M. (1987) 'Systematic approach to the design of technical systems and products, Guideline VDI 2221', Verein Deutscher Ingenieure, Beuth Verlag, Berlin
WALLACE, K.M. and HALES, C. (1987) 'Some applications of a systematic design approach in Britain' in Konstruktion, 39 (7), 275-279
WALLACE, K.M. and HALES, C. (1987) 'Detailed analysis of an engineering design project' in International Conference on Engineering Design (ICED'87), Boston, USA,

1986

ASHBY, M.F. and JONES, D.R.H. (1986) 'Engineering materials 2', Pergamon Press, 0080325327
CLARKSON, P.J. and ACARNLEY, P.P. (1986) 'Closed-loop control of stepping motor systems' in IEEE Industry Applications Society Annual Meeting, 1543-1549
WALLACE, K.M. (1986) 'Managing design for competitive advantage (Guideline)', Engineering Council, London

1985

WALLACE, K.M. (1985) 'Possible future trends in engineering design research' in International Conference on Engineering Design (ICED'85), Hamburg, Germany,

1984

WALLACE, K.M. (1984) 'Engineering design - a systematic approach by Pahl, G. and Beitz, W. (1st ed)', Design Council and Springer Verlag
WALLACE, K.M. (1984) 'Learning from the Germans' in Engineering,
WALLACE, K.M. (1984) 'Training mechanical engineering designers for their roles as members of design teams' in Design Research Society Conference on the Role of the Designer, Bath, UK,
WALLACE, K.M. and HALES, C. (1984) 'Research into the effectiveness of engineering design methods' in Design Research Society Conference on the Role of the Designer, Bath, UK,

1983

WALLACE, K.M. and HALES, C. (1983) 'The application and evaluation of formal engineering design methods' in International Conference on Engineering Design (ICED'83), Copenhagen, Denmark,

1982

FROST, H.J. and ASHBY, M.F. (1982) 'Deformation mechanism maps: the plasticity and creep of metals and ceramics', Pergamon Press, 0080293379
WALLACE, K.M. (1982) 'Engineering design - theory and practice' in Engineering Design Education,
WALLACE, K.M. (1982) 'Feedback in engineering design education' in Design Policy Conference, London, UK,

1981

REDDAWAY, J.L. and WALLACE, K.M. (1981) 'Design teaching in the Engineering Design Department at Cambridge University' in International Conference on Engineering Design (ICED'81), Rome,
WALLACE, K.M. (1981) 'Mechanical engineering design teaching - the Cambridge experience' in Conference on the Education of Tomorrow's Engineering Designers, Cambridge, UK,
WALLACE, K.M. and BOLTON, W.K. (1981) 'Cambridge tripos design project' in Engineering Design Education,

1980

WALLACE, K.M. (1980) 'Engineering design research?' in Design Research Society Conference on Design: Science: Method, Portsmouth, UK,
WALLACE, K.M. (1980) 'Learning from mistakes' in Education Supplement,,

1979

WALLACE, K.M. (1979) 'The new teacher of engineering design' in Annual Conference of the American Society for Engineering Education, Louisiana, USA,

Cambridge Engineering Design Centre

Publications

tbc

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

1996

1995

1994

1993

1992

1991

1990

1989

1988

1987

1986

1985

1984

1983

1982

1981

1980

1979

Navigation