Member Publications
2009
- DODSON, M. and PARKS, G.T. (2009) 'Robust Aerodynamic Design Optimization Using Polynominal Chaos' in Journal of Aircraft, 46 (2), 635-646
- GHISU, T., PARKS, G.T., JARRETT, J.P. and CLARKSON, P.J. (2009) 'An integrated system for the aerodynamic design of compression systems - Part II: Application' in ASME Journal of Turbomachinery, (accepted)
- GHISU, T., PARKS, G.T., JARRETT, J.P. and CLARKSON, P.J. (2009) 'An integrated system for the aerodynamic design of compression systems - Part I: Development' in ASME Journal of Turbomachinery, (accepted)
- JARRETT, J.P., GHISU, T. and PARKS, G.T. (2009) 'On the coupling of designer experience and modularity in the aerothermal design of turbomachinery' in Transactions - American Society of Mechanical Engineers Journal of Turbomachinery, 131 (3)
- KAVANAGH, R.M. and PARKS, G.T. (2009) 'A systematic comparison and multi-objective optimization of humid power cycles - Part I: Thermodynamics' in Transactions - Journal of Engineering for Gas Turbines and Power, 131 (4)
- KAVANAGH, R.M. and PARKS, G.T. (2009) 'A systematic comparison and multi-objective optimization of humid power cycles - Part II: Economics' in Transactions - Journal of Engineering for Gas Turbines and Power, 131 (4)
- SAEED, T., GRAHAM, W., BABINSKY, H., HALL, C., JARRETT, J.P. and SEFFEN, K. (2009) 'Conceptual design for a laminar flying wing aircraft' in 27th AIAA Applied Aerodynamics Conference, San Antonio, Texas, USA,
- SANTHANAKRISHNAN, D., PARKS, G.T., JARRETT, J.P. and CLARKSON, P.J. (2009) 'An integrated evaluation system for the conceptual design of space systems' in 7th Annual Conference on Systems Engineering Research (CSER 2009), Loughborough, UK,
- ZHAO, L., DAWES, W.N., PARKS, G.T., JARRETT, J.P. and YANG, S. (2009) 'Robust airfoil design with respect to boundary layer transition' in 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 17th AIAA/ASME/AHS Adaptive Structures Conference, 11th AIAA Non-Deterministic Approaches Conference, Palm Springs, California, USA,
2008
- BELL, T.A. (2008) 'Flexibility or performance? Modularity and aero engine design', PhD, University of Cambridge
- BELL, T.A., JARRETT, J.P. and CLARKSON, P.J. (2008) 'Exploring the effects of removing process-intrinsic constraints with an integrated approach to gas turbine design' in Journal of Propulsion and Power, 24 (4), 751-762
- GHISU, T., PARKS, G.T., JARRETT, J.P. and CLARKSON, P.J. (2008) 'Accelerating design optimisation via principal components analysis' in 12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Victoria, British Columbia, Canada,
- GHISU, T., PARKS, G.T., JARRETT, J.P. and CLARKSON, P.J. (2008) 'Design Optimisation of Gas Turbine Compression Systems' in 4th AIAA Multidisciplinary Design Optimization Specialist Conference, Schaumburg, Illinois, USA,
- GHISU, T., PARKS, G.T., JARRETT, J.P. and CLARKSON, P.J. (2008) 'Robust design optimisation of gas turbine compression systems' in 12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Victoria, British Columbia, Canada,
- HUTABARAT, W., PARKS, G.T., JARRETT, J.P., DAWES, W.N. and CLARKSON, P.J. (2008) 'Aerodynamic Topology Optimisation Using an Implicit Representation and a Multiobjective Genetic Algorithm' in Artificial Evolution, 4926, 148-159
- JAEGGI, D.M., PARKS, G.T., DAWES, W.N. and CLARKSON, P.J. (2008) 'Robust multi-fidelity aerodynamic design optimization using surrogate models' in 12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Victoria, British Columbia, Canada, (accepted)
- JAEGGI, D.M., PARKS, G.T., KIPOUROS, T. and CLARKSON, P.J. (2008) 'The development of a multi-objective tabu search algorithm for continuous optimisation problems' in European Journal of Operational Research, 185 (3), 1192-1212 (published)
- JARRETT, J.P. (2008) 'A Study on Changing Requirements Part Way Through an Aerodynamic Design Process' in 12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Victoria, British Columbia, Canada,
- JARRETT, J.P., GHISU, T. and PARKS, G.T. (2008) 'On the coupling of designer experience and modularity in the aerothermal design of turbomachinery' in ASME Turbo Expo 2008, Berlin, Germany,
- KIPOUROS, T., DUNSTAN, T.D., JENKINS, K.W. and CANT, R.S. (2008) 'Towards the development of a complete computational design system for complicated and advanced combustion applications' in SIAM 12th International Conference on Numerical Combustion, Monterey, California, USA,
- KIPOUROS, T., GHISU, T., PARKS, G.T. and SAVILL, A.M. (2008) 'Using post-analyses of optimisation processes as an active computational design tool' in International Conference on Computational and Experimental Engineering and Sciences (ICCES'08), Honolulu, Hawaii, USA, 7, 151-157
- KIPOUROS, T., JAEGGI, D.M., DAWES, W.N., PARKS, G.T., SAVILL, A.M. and CLARKSON, P.J. (2008) 'Insight into high-quality aerodynamic design spaces through multi-objective optimization' in Computer Modeling in Engineering and Sciences (CMES), 37, 1-44
- KIPOUROS, T., JAEGGI, D.M., DAWES, W.N., PARKS, G.T., SAVILL, A.M. and CLARKSON, P.J. (2008) 'Biobjective design optimization for axial compressors using tabu search' in AIAA Journal, 46 (3), 701-711
- KIPOUROS, T., JENKINS, K.W. and SAVILL, A.M. (2008) 'Development of computational tools for the engineering design optimisation of microcombustors' in 5th ECCOMAS, Venice, Italy,
- KIPOUROS, T., MLECZKO, M. and SAVILL, A.M. (2008) 'Use of parallel-coordinates for post-analyses of multi-objective aerodynamic optimisation in turbomachinery' in 4th AIAA Multi-Disciplinary Design Optimization Specialist Conference, Schaumburg, Illinois, USA,
- SKINNER, B. (2008) 'Multi-objective evolutionary optimisation of submarine propulsion design', PhD-thesis, University of Cambridge (submitted)
- SKINNER, B., PARKS, G.T. and PALMER, P.R. (2008) 'Comparison of submarine drive topologies using multi-objective genetic algorithms' in IEEE Transactions on Vehicular Technology, 57 (3) (submitted)
2007
- COOK, R., MOLINA-CRISTOBAL, A., PARKS, G.T., OSORNIO CORREA, C. and CLARKSON, P.J. (2007) 'Multi-objective optimisation of a hybrid electric vehicle: drive train and driving strategy' in 4th International Conference on Evolutionary Multi-Criterion Optimization (EMO2007), Matsushima, Japan, 4403, 330-345
- DAWSON, P.J., PARKS, G.T., JAEGGI, D.M., MOLINA-CRISTOBAL, A. and CLARKSON, P.J. (2007) 'The development of a multi-threaded multi-objective tabu search algorithm' in 4th International Conference on Evolutionary Multi-Criterion Optimization (EMO2007), Matsushima, Japan, 4403, 242-256
- DODSON, M. (2007) 'Handling uncertainty in CFD with polynomial chaos', MPhil-thesis, Cambridge University Engineering Department
- GHISU, T., MOLINARI, M., PARKS, G.T., DAWES, W.N., JARRETT, J.P. and CLARKSON, P.J. (2007) 'Axial compressor intermediate duct design and optimisation' in 3rd AIAA Multidisciplinary Design Optimization Specialist Conference, Honolulu, Hawaii, USA,
- HUTABARAT, W., PARKS, G.T., JARRETT, J.P., DAWES, W.N. and CLARKSON, P.J. (2007) 'Aerodynamic Topology Optimisation Using an Implicit Representation and a Multiobjective Genetic Algorithm' in 8th International Conference on Artificial Evolution, Tours, France, 148-159
- JARRETT, J.P., DAWES, W.N. and CLARKSON, P.J. (2007) 'An approach to integrated multi-disciplinary turbomachinery design' in Transactions - American Society of Mechanical Engineers Journal of Turbomachinery, 129 (3), 488-494
- KAVANAGH, R.M., PARKS, G.T. and OBANA, M. (2007) 'Multi-objective optimisation of the humid air turbine' in ASME Turbo Expo 2007: Power for Land, Sea, and Air (GT2007), Montreal, Canada, 3, 211-221
- KIPOUROS, T., MOLINARI, M., DAWES, W.N., PARKS, G.T., SAVILL, M. and JENKINS, K.W. (2007) 'An investigation of the potential for enhancing the computational turbomachinery design cycle using surrogate models and high performance parallelisation' in ASME Turbo Expo 2007, Montreal, Canada, 1415-1424
- MOLINA-CRISTOBAL, A., PAPAGEORGIOU, C., PARKS, G.T., SMITH, M.C. and CLARKSON, P.J. (2007) 'Multi-objective Controller Design: Evolutionary Algorithms and Bilinear Matrix Inequalities for a Passive Suspension' in IFAC Workshop on Control Applications of Optimization, Cachan, France, 386-391
- SKINNER, B.A., PALMER, P.R. and PARKS, G.T. (2007) 'Multi-objective design optimisation of submarine electric drive systems' in IEEE Electric Ship Technologies Conference (IEEE EST 2007), Arlington, VA, USA,
- SKINNER, B., PALMER, P.R. and PARKS, G.T. (2007) 'Multi-objective evolutionary optimisation of submarine electric drive - system design and hybrid drive control strategy' in International Conference on Computational Methods in Marine Engineering (MARINE 2007), CIMNE, Barcelona, Spain,
2006
- BELL, T.A., JARRETT, J.P. and CLARKSON, P.J. (2006) 'Multidisciplinary constraint visualization and trade-off exploration in aero engine preliminary design' in 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Newport, Rhode Island, USA,
- BELL, T.A., JARRETT, J.P. and CLARKSON, P.J. (2006) 'Exploring multidisciplinary trade-offs in turbomachinery design' in ASME Turbo Expo 2006, Barcelona, Spain,
- GHISU, T., PARKS, G.T., JARRETT, J.P. and CLARKSON, P.J. (2006) 'Multi-objective optimisation of aero-engine compressors' in 3rd International Conference on the future of gas turbine technology, Brussels,
- HUTABARAT, W., PARKS, G.T., JARRETT, J.P. and CLARKSON, P.J. (2006) 'A new approach to aerodynamic topology optimization' in Adaptive Computing in Design and Manufacture (ACDM 06), Bristol, UK,
- JARRETT, J.P. (2006) 'Multi-fidelity gradient-based optimization in turbomachinery aerodynamic design' in The 2nd AIAA Multidisciplinary Design Optimization Specialist Conference, Newport, Rhode Island, USA,
- JARRETT, J.P. (2006) 'Multi-fidelity CFD and Optimisation in the Design of Complex Systems' in Automated Design and Optimisation Techniques using CFD, London, UK,
- JARRETT, J.P., BELL, T.A. and CLARKSON, P.J. (2006) 'Towards orthogonal turbomachinery design' in ASME Turbo Expo 2006, Barcelona, Spain,
- KIPOUROS, T. (2006) 'Multi-objective aerodynamic design optimisation', PhD-thesis, Cambridge University Engineering Department
- MOLINA-CRISTOBAL, A., PARKS, G.T. and CLARKSON, P.J. (2006) 'Finding robust solutions to multi-objective optimisation problems using polynomial chaos' in 6th ASMO UK/ISSMO Conference on Engineering Design Optimization, Oxford, UK,
- MOLINARI, M. and DAWES, W.N. (2006) 'A review of evolution of compressor design process and future perspectives' in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 220 (6)
- MOLINARI, M., JARRETT, J.P., CLARKSON, P.J. and DAWES, W.N. (2006) 'Characterizing the design space in multi-objective compressor blade shape optimization' in 2nd AIAA Multidisciplinary Design Optimization Specialist Conference, Newport, Rhode Island, USA,
- WYSE, S.G., CANT, R.S. and PARKS, G.T. (2006) 'Towards the multiobjective optimisation of gas turbine combustion chambers' in ASME Turbo Expo 2006, Barcelona, Spain,
2005
- BELL, T.A. and JARRETT, J.P. (2005) 'An integrated approach to the conceptual design of aeroengines' in 6th International Conference on Computer-Aided Industrial Design & Conceptual Design (CAID & CD 2005), Delft, The Netherlands,
- BRYANT, A.T., JAEGGI, D.M., PARKS, G.T. and PALMER, P.R. (2005) 'The influence of operating conditions on multi-objective optimization of power electronic devices and circuits' in IEEE Industry Applications Society Conference Record, Hong Kong,
- JAEGGI, D.M., PARKS, G.T., KIPOUROS, T. and CLARKSON, P.J. (2005) 'A multi-objective parallel tabu search algorithm for constrained optimisation' in The 3rd International Conference of Evolutionary Multi-Criterion Optimisation, Guanajuato, Mexico, 3410, 490-504
- KIPOUROS, T., JAEGGI, D.M., DAWES, W.N., PARKS, G.T. and SAVILL, M. (2005) 'Multi-objective optimisation of turbomachinery blades using tabu search' in The 3rd International Conference of Evolutionary Multi-Criterion Optimisation, Guanajuato, Mexico, 3410, 897-910
- KIPOUROS, T., JAEGGI, D.M., DAWES, W.N., PARKS, G.T. and SAVILL, M. (2005) 'Multi-criteria optimisation of turbomachinery blades: investigating the trade-off surface' in 41st AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, Tucson, Arizona, USA, AIAA-2005-4023
- KIPOUROS, T., JAEGGI, D.M., DAWES, W.N., PARKS, G.T. and SAVILL, M. (2005) 'Multi-objective aerodynamic design optimisation for axial compressors' in ERCOFTAC Bulletin, 66 (Sept), 21-24
2004
- JAEGGI, D.M., ASSELIN-MILLER, C.S., PARKS, G.T., KIPOUROS, T., BELL, T.A. and CLARKSON, P.J. (2004) 'Multi-objective parallel tabu search' in The 8th International Conference on Parallel Problem Solving from Nature (PPSN), Birmingham, UK, 3242, 732-741
- JARRETT, J.P., DAWES, W.N. and CLARKSON, P.J. (2004) 'An approach to integrated multi-disciplinary turbomachinery design' in ASME Turbo Expo 2004, Austria Center Vienna, (CD-ROM)
- KIPOUROS, T., PARKS, G.T. and SAVILL, M. (2004) 'Multi-objective aerodynamic design optimisation' in Design Optimization: Methods and Applications. International Conference and Advanced Course Program (ERCOFTAC), Athens, Greece, (CD-ROM. ERCODO2004_239)
